All Products
Showing 21-40 of 50 products · 10 unavailable products hidden
DB9 Male to RJ45 Female Adapter
This DB9 Male to RJ45 Female Adapter can be used to handle serial data communication between RS232 devices with one RJ45 network cable, or as an extender to extend RS232 serial signal to about 20m.Two modules are required for serial port to network cable transmission. It enables to extend serial ...
SparkFun RJ45 MagJack Breakout
This is the SparkFun RJ45 MagJack Breakout, a simple board that will provide you with a way to put an ethernet port into your breadboard. The SparkFun RJ45 MagJack Breakout is the same one found in our very own mbed Starter Kit and breaks out each pin from the ethernet jack. This rev of the br...
DB15 Male to RJ45 Female Adapter
This DB15 Male to RJ45 Female Adapter can be used to handle data communication between VGA interface devices with one RJ45 network cable, or as an extender to extend VGA signal to about 20m.Two modules are required for video transmission. It enables to extend signal to 20m with CAT5/6 network cab...
RJ45 Ethernet MagJack-Compatible
Ethernet is now ubiquitous with embedded systems. Before you can get your set-top box on the internet, you’ll need one of these single port, RJ45 ethernet jacks with built in transformer (magnetics), status LEDs, and shielding. Documents: Datasheet
DE-15 (DB-15) Male Plug to Terminal Block Breakout
Make your own custom DE-15 cable or DE-15 interface with ease, using this DE-15 Plug to Terminal Block Breakout. You get a nice solid PCB with a DE-15 plug and two strips of terminal blocks that you can use with stranded or solid core wire to quickly assemble your own wiring jigs. If you just ...
SparkFun RTK mosaic-X5
·
The SparkFun RTK mosaic-X5 is a high-precision GNSS positioning and navigation receiver built around the Septentrio mosaic-X5 multi-constellation, multi-frequency module. Supporting GPS, GLONASS, Beidou, Galileo, NavIC, SBAS, and QZSS across L1/L2/L5 bands, the 448-channel receiver delivers centi...
W5200 Ethernet Shield
The W5200 Ethernet Shield adds wired internet connectivity to your Arduino. Simply stack it onto your board, connect an RJ45 cable, and start communicating over the network. The W5200 controller provides a 32 KB internal buffer — double that of the W5100 — and supports up to eight simultaneous TC...
DE-9 (DB-9) Male Plug to Terminal Block Breakout
The DE-9 (DB-9) Male Plug to Terminal Block Breakout makes it easy to create custom DE-9 cables or interfaces without soldering a connector. A solid PCB breaks out all nine pins of the DE-9 plug to screw terminal blocks, allowing quick connections with stranded or solid-core wire. Ideal for non-...
Screw Terminal Block: 3-Pin, 5 mm Pitch, Side Entry (4-Pack)
These side-entry screw terminal blocks have a pitch of 5 mm (0.197″). Each block has three terminals for the stripped ends of 22 – 14 AWG wires, and units can slide together to make longer strips. They are rated for 250 V, 16 A (UL) and ship in packs of four.
M.2 (A+E Key) to 2.5G Ethernet Network Card for LattePanda (Supports Windows 10 / 11, Linux)
·
##Introduction The M.2 to 2.5G Ethernet Network Card is a versatile, high-performance networking solution that enhances connectivity in systems equipped with M.2 slots, such as the LattePanda Alpha and Sigma. With the Intel I225-V chipset, it converts an M.2 slot into a high-speed 2.5G Ethernet R...
8 Channel Ethernet Relay Controller (Support PoE and USB)
An 8-channel PoE and USB-controlled Ethernet relay controller based on an STM32 microcontroller. Each relay handles up to 277VAC at 10A or 125VAC at 12A, suitable for controlling household appliances, lighting, and industrial equipment remotely over a network. Supports DHCP and static IP configu...
10-Way 3.5mm Right-Angle Terminal Block Header
·
This 10-position right-angle terminal block header is made for secure, pluggable wire-to-board connections on a PCB. Solder it directly to your board and use it as the receptacle for a removable screw terminal block.It is well suited to I/O signals and power lines that may need to be disconnected...
Terminal Block Shield for Arduino
The Terminal Block Shield for Arduino replaces loose jumper wires with secure screw-terminal connections, making your wiring stable and reliable. Each Arduino pin is broken out to a 3.5 mm pitch terminal block, and multiple 3.3V, 5V, and GND ports are provided for convenient power distribution. ...
Ethernet RJ45 Female Plug Terminal Block
This Ethernet RJ45 Female Plug to 8-Pin Terminal Block provides a solder-free way to break out an RJ45 Ethernet connection to individual screw terminals. The standard RJ45 port features a metal shielding layer for electromagnetic interference protection, while the detachable terminal block allows...
RJ45 Female to M12 4 Pin Male Adapter
This M12 to RJ45 Ethernet adapter uses M12 male 4 pin D coded with IP67 waterproof rating, which is impervious to dust and short-term soaking, safe and reliable to use. There are metal shielding layers on the RJ45 port for fixing interface and preventing external electromagnetic interference, whi...
PCIe To Gigabit Ethernet And USB 3.2 Gen1 HAT For Raspberry Pi 5
PCIe To Gigabit Ethernet And USB 3.2 Gen1 HAT For Raspberry Pi 5, 3x USB 3.2 Gen1, 1x Gigabit Ethernet, Driver-Free, Plug And Play, Raspberry Pi 5 PCIe HATExtends 1x Gigabit Ethernet Port Equipped With RTL8153B High-Performance Gigabit ETH Chip, Sinking Design Of Network Port, Neat And Be...
DE-9 (DB-9) Male Plug to Terminal Spring Block Adapter
Make your own custom DE-9 cable or DE-9 interface with ease, using this DE-9 Plug to Terminal Spring Block Adapter. You get a nice solid PCB with a DE-9 plug and one line of push-spring terminal blocks that you can use with stranded or solid core wire to quickly assemble your own wiring jigs.We r...
SparkFun RTK Reference Station
The SparkFun RTK Reference Station is a high-precision GNSS base station designed for surveying, geolocation, and time reference applications. Set up a fixed-location NTRIP server to provide RTK corrections to rovers, or use it as an NTP server for network time synchronisation — all with just a f...
Male DC Power adapter - 2.1mm plug to screw terminal block
If you need to connect a battery pack or wired power supply to a board that has a DC jack - this adapter will come in very handy! There is a 2.1mm DC plug on one end, and a screw terminal block on the other. The terminals are labeled with positive/negative assuming a positive-tip configuration (w...
1/4 (6.35mm) Stereo Plug Terminal Block
A 1/4" (6.35 mm) stereo plug with screw terminal connections — no soldering required. Simply insert stranded or solid-core wire into the terminal block and tighten with a small screwdriver to create custom audio wiring in seconds. The terminal block design makes it easy to prototype, test, and r...
