All Products

SKU: SF-SEN-19037

The SparkFun Qwiic dToF TMF8821 Imager is a direct time-of-flight (dToF) sensor that includes a single modular package with an associated Vertical Cavity Surface Emitting Laser (VCSEL) from AMS. The dToF device is based on Single Photon Avalanche Photodiode (SPAD), time-to-digital converter (TDC)...

SKU: AF-2746

The Adafruit Bluefruit LE Shield adds Bluetooth Low Energy connectivity to your Arduino in a plug-in shield form factor. Solder the included headers, stack it on your Arduino, and start communicating wirelessly with iOS and Android devices — no special iOS certification required. The shield conn...

SKU: DF-DFR1080

Built around a 13th-gen Intel Core i5-1340P, this compact x86 single-board computer is made for demanding Windows, Linux and server-style maker projects. It combines laptop-class processing, 16GB of dual-channel LPDDR5 memory and Intel Iris Xe graphics in a 3.5" form factor.The board brings out a...

SKU: SF-DEV-16985

The SparkFun MicroMod Input and Display Carrier Board is a great way to add data and input visibility to your MicroMod project. Want to create your own embedded game? How about displaying data that is remotely collected and transmitted by your SparkFun MicroMod Weather Carrier Board and its proce...

SKU: DF-FIT1004 · MPN: FIT1004

An M.2 E Key wireless network card based on the Intel BE200 chipset, supporting WiFi 7 (IEEE 802.11be) with triple-band connectivity and Bluetooth 5.4. It delivers maximum wireless speeds of up to 8,774 Mbps across 2.4 GHz, 5.8 GHz, and 6 GHz bands, making it suitable for upgrading laptops, deskt...

SKU: DF-DFR1091 · MPN: DFR1091

##Introduction LattePanda Sigma is a hackable x86 Windows / Linux single board server with mighty power. It features an Intel Core i5-1340P processor with Intel Iris Xe Graphics, and up to 32GB Dual-Channel LPDDR5 memory. This powerful single board computer can be used as a home server, streaming...

SKU: DF-FIT1005 · MPN: FIT1005

The M.2 2.5G Network Card adds high-speed Ethernet connectivity to devices with an M.2 B+M Key slot. Powered by the Intel I225-V chipset, it supports adaptive data rates up to 2500 Mbps and is compatible with LattePanda Alpha, LattePanda 3 Delta, LattePanda Sigma, and other M.2-equipped single-bo...

SKU: DF-DFR0554

The Gravity I2C 16×2 LCD features RGB font colours on a black background, allowing you to display text in any of 16 million colour combinations. Using the Gravity I2C interface, only two data lines are needed for both communication and backlight control. The display supports 2 rows of 16 charact...

SKU: SF-SEN-19451

The SparkFun Qwiic Mini dToF TMF8821 Imager is a direct time-of-flight (dToF) sensor that includes a single modular package with an associated Vertical Cavity Surface Emitting Laser (VCSEL) from AMS. The dToF device is based on Single Photon Avalanche Photodiode (SPAD), time-to-digital converter ...

SKU: DF-DFR0071

The DFRobot SD Module (DFR0071) is a breakout board that adds standard SD and Micro SD (TF) card storage to your Arduino projects. Use it for data logging, file storage, and transferring data between your microcontroller and removable flash memory. The module sits directly on top of an Arduino b...

SKU: AF-5808 · MPN: ADA5808

This square TFT module is made for advanced display projects that need a high-resolution, compact screen. It has a 3.4 inch IPS panel with 480x480 full-colour pixels, giving a crisp square format with good colour visibility off-axis.The display uses an ST7701S driver with SPI for configuration an...

SKU: SF-SEN-19218

The SparkFun Qwiic Mini dToF TMF8820 Imager is a direct time-of-flight (dToF) sensor that includes a single modular package with an associated Vertical Cavity Surface Emitting Laser (VCSEL) from AMS. The dToF device is based on Single Photon Avalanche Photodiode (SPAD), time-to-digital converter ...

SKU: SF-DEV-11287

The Arduino WiFi Shield allows an Arduino board to connect to the internet using the 802.11 wireless specification (WiFi). It is based on the HDG204 Wireless LAN 802.11b/g System in-Package. An Atmega 32UC3 provides a network (IP) stack capable of both TCP and UDP. Use the WiFI library to write s...

SKU: AF-4346

The Adafruit PDM Microphone Breakout with JST SH Connector provides a digital audio input using Pulse Density Modulation (PDM) in a compact, cable-ready form factor. The 4-pin JST SH connector (3V, GND, DAT, CLK) pairs with JST SH cables for flexible microphone placement away from the main board....

SKU: DF-DFR0094

Infrared devices are widely used, and often for remote controlled devices. With this IR receiver, your Arduino project is now able to receive command from any IR remote controller. Well, it will be also easy to make your own IR controller using IR transmitter. SPECIFICATIONS ...

SKU: SF-SEN-16429 · MPN: SEN-16429

The MLX90640 is a fully calibrated thermal IR array sensor with 32x24 pixels, giving you 768 FIR pixels for non-contact temperature sensing. It uses a digital I2C interface and comes in an industry standard 4-lead TO39 package.An ambient sensor is integrated to measure the chip temperature, along...

SKU: WS-31337 · MPN: 31337

Elevate Your Development Experience with the RP2350 1.64" AMOLED Display Development Board!🚀 Product Overview:The RP2350 1.64" AMOLED Display Development Board is a cutting-edge IoT development platform designed by Waveshare and powered by the versatile RP2350A microcontroller chip developed by R...

SKU: AF-5664

Need to use multiple I2C devices that share the same address? The PCA9546 4-Channel STEMMA QT / Qwiic I2C Multiplexer lets you connect up to four same-address I2C devices with completely solderless wiring. Five JST SH connectors (1 input + 4 outputs) make it plug-and-play with any STEMMA QT or Qw...

SKU: SF-PRT-19296

This is a 5-pack of the M.2 screws that SparkFun uses with the MicroMod ecosystem.MicroMod uses the common M.2 connector. This is the same connector found on modern motherboards and laptops. There are various locations for the plastic ‘key’ on the M.2 connector to prevent a user from inserting an...

SKU: DF-SEN0213

The DFRobot Gravity Heart Rate Monitor Sensor measures the electrical activity of the heart and outputs it as an analog signal. Built around the AD8232 chip, it filters and amplifies the ECG signal to produce a clean waveform from the PR and QT intervals — viewable in real time using the Arduino ...