All Products

SKU: SF-KIT-14180

Robots are fun, and Arduinos are easy. So wouldn’t it be nice if there were a kit that included everything you need to get your Arduino device set up to control a simple two-motor-circuit buddy? The SparkFun Ardumoto Shield Kit is perfect for any robot enthusiast and includes an Ardumoto Shield, ...

SKU: DF-FIT0165

An 8-pin female stackable header with extended legs, designed for stacking Arduino shields and prototyping boards. The extra-long pins pass through one board and connect to the next, making it easy to build multi-layer shield stacks. Standard 0.1-inch (2.54mm) pin spacing ensures compatibility w...

SKU: DF-DFR0920

The Terminal Block Shield for Arduino replaces loose jumper wires with secure screw-terminal connections, making your wiring stable and reliable. Each Arduino pin is broken out to a 3.5 mm pitch terminal block, and multiple 3.3V, 5V, and GND ports are provided for convenient power distribution. ...

SKU: EC-ACS52001S

The W5200 Ethernet Shield adds wired internet connectivity to your Arduino. Simply stack it onto your board, connect an RJ45 cable, and start communicating over the network. The W5200 controller provides a 32 KB internal buffer — double that of the W5100 — and supports up to eight simultaneous TC...

SKU: SF-PRT-11417

These headers are made to work with the Arduino Uno R3, Leonardo and new Arduino boards going forward. They are the perfect height for clearing the USB-B connector and great for stacking multiple shields. This kit includes 4 headers (2 8-pin, 1 10-pin and 1 6-pin), enough to connect a shield t...

SKU: SF-PRT-11376

A 10-pin female header with extra-long legs, designed for stacking Arduino R3-compatible shields. The extended pins pass through a shield's PCB and connect to the board below, letting you stack multiple shields on a single Arduino. Key Features 10-Pin Female Header – Standard 0.1″ (2.54 mm) pi...

SKU: SS-103030002

The mbed Shield is an application board designed for the mbed LPC1768 prototyping platform. It brings together CAN, Ethernet, USB, and four standard Grove connectors on a single board, making it easy to connect sensors, actuators, and communication interfaces to your mbed projects. With a standa...

SKU: EC-ACM82664A

The Crowduino UNO ESP8266 combines an Arduino UNO-compatible microcontroller with an onboard ESP8266 WiFi module in a single, compact board. Instead of wiring a separate WiFi shield or module, you get integrated wireless connectivity right out of the box. Built around the ATmega328 running at 16...

SKU: EC-MCA03168A

The Nano 168 is a compact, breadboard-friendly Arduino-compatible development board based on the ATmega168 microcontroller. It offers the same functionality as the Arduino Nano in a small DIP form factor, with 14 digital I/O pins, 8 analogue inputs, and Mini-B USB for programming and serial commu...

SKU: EC-MCS01110

The Screw Shield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by Arduino Protoshield, including: a large prototyping space of both connected and unconnected 0.1" spaced through-holes, a couple 5V and GND busses, a reset button, and ...

SKU: EC-CCH01065C

A 1×6 female stackable header with extra-long pins, designed for stacking Arduino shields. The extended legs pass through one shield's PCB and connect into the board below, allowing multiple shields to be stacked on top of each other. Specifications Pins: 6 (1×6 single row) Type: Female stack...

SKU: DF-DFR0921

Has it ever happened to you that you spent a lot of time ascertaining a problem when making projects and finally found out it was just caused by loose wiring? Then, what you may need is a terminal block shield like this! The shield adopts terminal blocks to secure wires so as to make connections ...

SKU: LB-CTCYELLOW

A classroom replenishment kit for the Crack the Code unit of work. This set provides 21 complete Arduino kits, each with a Little Bird Arduino R3 board, Crack the Code Shield, storage case, and USB cable — ready for a full class of students. Package Contents 21× Little Bird Arduino R3 boards 21...

SKU: EC-MCA03328A

The Crowduino Nano V3.1 is a compact, breadboard-friendly development board based on the ATmega328, fully compatible with the Arduino Nano 3.0 and its shields. It features a Mini-B USB port for programming and serial communication, 14 digital I/O pins (6 with PWM), and 8 analogue inputs. Power i...

SKU: DF-FIT0146

An 8-pin female header with extra-long legs, designed for stacking Arduino shields. The extended pins pass through to the board below, allowing multiple shields to be stacked on a single Arduino. Pins are spaced at standard 0.1″ (2.54mm) pitch. Specifications Pin Count – 8 pins, single row Pi...

SKU: DF-DFR0905

This is the first PLC equipment based on the Arduino Technology designed for a professional use. Taking Arduino Mega2560 as its core control chip, the M-Duino PLC has 17 I/Os including 4 analog and digital inputs, 2 interrupt isolated input, 3 analog outputs, 8 digital isolated relay outputs...

SKU: DF-DFR0903

This Arduino-based Industrial PLC (Relay Output) features 8 inputs and 6 outputs(digital relay output). As it uses an Arduino Leonardo, you can directly program it through the USB, which is pretty easy to get started. The Spartan controllers are all standarised and can be programmed exactly ...

SKU: SF-DEV-22632

Arduino empowers makers’ creativity and passion for innovation with a robust new board that’s perfect for all users, from beginners to experts – allowing anyone to easily connect to the internet and create IoT projects. Your user-friendly, accessible UNO just took a quantum leap forward: Ardui...

SKU: SF-DEV-14134

The Arduino Industrial 101 is a compact WiFi evaluation board based on the Arduino 101 LGA module. Combining an ATmega32U4 microcontroller with an Atheros AR9331 MIPS Linux processor, it provides a powerful platform for IoT projects without the need for multiple shields. Similar to the Arduino Y...

SKU: SF-DEV-27924 · MPN: DEV-27924

Control a project with muscle activity instead of buttons, levers or joysticks. The MyoWare® 2.0 Muscle Sensor is an all-in-one surface electromyography (sEMG) sensor that detects the electrical signals generated when a muscle flexes, then outputs an analogue signal representing the strength of t...