All Products

SKU: AF-4374

The Adafruit BrainCraft HAT is a Raspberry Pi 4 add-on board designed for machine learning and AI projects at the edge. It combines a display, stereo microphones, audio output, camera connector, user controls, and sensor ports into a single HAT, providing everything needed to build audio and vide...

SKU: AF-4823

A 150mm (6″) GPIO extension cable for Raspberry Pi models with a 2×20 pin header. Extends all 40 GPIO pins between your Pi and a HAT, Bonnet, pHAT, or other accessory, allowing you to mount add-ons away from the board. Plug the socket end onto the Raspberry Pi's GPIO header (white mark aligned w...

SKU: AF-3203

The Adafruit Perma-Proto Bonnet Mini Kit is a prototyping daughter board sized for the Raspberry Pi Zero. It plugs directly onto the Pi's 2×20 GPIO header and provides a grid of 0.1″ soldering holes connected in a familiar breadboard pattern — making it easy to transfer circuits from a solderless...

SKU: AF-4900

The Adafruit QT Py RP2040 puts the popular Raspberry Pi RP2040 chip into the tiny QT Py form factor. With dual-core ARM Cortex-M0+ running at 125 MHz, 264 KB SRAM, 8 MB flash, native USB, and a STEMMA QT connector, it's a powerful little board for CircuitPython, MicroPython, or C/C++ projects. T...

SKU: AF-4506

The Adafruit 1.3" Colour TFT Bonnet for Raspberry Pi combines a 240×240 IPS TFT display with a 5-way joystick and two pushbuttons on a single plug-and-play bonnet. The display is driven by the ST7789 controller over SPI, delivering vibrant 16-bit colour with wide viewing angles. A Qwiic/STEMMA Q...

SKU: DF-DFR0528

DFRobot UPS HAT is an uninterruptable power supply shield designed for the Raspberry Pi Zero series, and also compatible with Pi 2/3/A+. The UPS HAT can continue to provide power to the Raspberry Pi for a certain period of time when the system is powered off, by which to avoid system damage and a...

SKU: AF-4084

The Adafruit Grand Central M4 Express is a powerful development board built around the Microchip ATSAMD51P20 — a 120 MHz Cortex M4 processor with hardware floating point, 1 MB Flash, and 256 KB RAM. In the familiar Arduino Mega form factor, it brings 70 GPIO pins, dual DACs, 15 analog inputs, 8 M...

SKU: AF-2264

The Adafruit FT232H Breakout turns your computer into a versatile interface for hardware protocols. Using the FTDI FT232H chip with its multi-protocol synchronous serial engine, you can communicate directly with I2C, SPI, JTAG, and serial UART devices — plus read and write digital GPIO pins — all...

SKU: AF-4064

The Adafruit Grand Central M4 Express is a powerful development board built around the Microchip ATSAMD51P20 — a 120 MHz Cortex M4 processor with hardware floating point, 1 MB Flash, and 256 KB RAM. In the familiar Arduino Mega form factor, it brings 70 GPIO pins, dual DACs, 15 analog inputs, 8 M...

SKU: AF-3416

The Adafruit 16-Channel PWM/Servo Bonnet adds precision servo and PWM control to your Raspberry Pi. Using the PCA9685 I2C PWM controller, it drives up to 16 servos or PWM outputs simultaneously with 12-bit resolution — completely free-running with no Pi processing overhead. Up to 62 bonnets can ...

SKU: AF-4863

The Adafruit CYBERDECK HAT is a GPIO extender for the Raspberry Pi 400 that lets you plug full-size HAT displays and add-on boards into the back of the Pi 400 at a convenient angle. It duplicates every GPIO pin from input to output, so your HATs work without any pin limitations. In addition to t...

SKU: AF-5996 · MPN: ADA5996

The Adafruit QT Py CH32V203 is a tiny development board built around the WCH CH32V203G6 — a low-cost RISC-V microcontroller running at up to 144 MHz. In the compact QT Py form factor (Seeed Xiao compatible), it packs USB-C, a STEMMA QT connector, an RGB NeoPixel, and 10 GPIO pins into a board sma...

SKU: AF-6057 · MPN: ADA6057

SKU: AF-1988

That new Raspberry Pi® Model B+ computer you just got has a row of 2x20 pin headers soldered on - those are the GPIO (general purpose input/output) pins and for those of us who like to hack electronics they are where the real fun is. By programming the Pi, you can twiddle those pins high or low, ...

SKU: AF-2359

The Adafruit Raspberry Pi A+ Case is a slim, durable polycarbonate enclosure designed specifically for the Raspberry Pi Model A+. With a smoke-tinted base and clear top, it offers a clean, professional look while keeping your Pi protected and accessible. Designed by Mike Doell, the case features...

SKU: AF-3356

The Adafruit Animated Eyes Bonnet (also known as the Snake Eyes Bonnet) is a Raspberry Pi accessory for driving two 128×128 pixel OLED or TFT LCD displays along with four analog sensor inputs. It's designed for creating animated eye effects in cosplay masks, props, sculptures, animatronics, robot...

SKU: AF-3252

The Adafruit Raspberry Pi Zero Case is a compact two-piece polycarbonate enclosure that protects your Pi Zero while keeping all ports accessible. Designed by Mike Doell, it features a sleek black base and clear top that snap together without screws. The case provides slim openings for mini HDMI,...

SKU: AF-3813

This complete pack includes everything you need to build animated eyes with a Raspberry Pi (not included). The Adafruit Snake Eyes Bonnet drives two high-density 1.54" TFT displays at 240×240 resolution with IPS wide-angle viewing, delivering sharp, vibrant eye animations with image quality rival...

SKU: AF-3464

The Adafruit Joy Bonnet turns your Raspberry Pi Zero into a handheld gaming device. This fully assembled bonnet sits on top of any Pi Zero and provides arcade-style controls — a mini joystick and buttons — that act as keyboard inputs once you run the Adafruit installer script. No soldering requir...

SKU: LB-LS7233

Upgrade your Raspberry Pi experience with our GPIO Expansion Extension Board Screw Terminal Hat! This beautifully designed screw terminal expansion version is the perfect addition to your electronic experiments. Conveniently connect your Raspberry Pi pins with ease using this extension board.The ...