All Products

SKU: AF-2039

A 16×8 LED matrix backpack kit featuring two ultra-bright 1.2" blue 8×8 round LED matrices on a single I2C-controlled driver board. The HT16K33 chip handles all the multiplexing, so you only need two I2C pins (SDA and SCL) to control 128 LEDs — no complex wiring required. The backpack features c...

SKU: AF-2037

A 16×8 LED matrix backpack kit featuring two ultra-bright 1.2" red 8×8 round LED matrices on a single I2C-controlled driver board. The HT16K33 chip handles all the multiplexing, so you only need two I2C pins (SDA and SCL) to control 128 LEDs — no complex wiring required. The backpack features co...

SKU: AF-2865

Put on your sunglasses before plugging in this shield — 40 eye-blistering RGBW LEDs adorn the NeoPixel Shield for a blast of configurable colour and white. Arranged in a 5×8 matrix, each pixel is individually addressable using just one pin (Digital #6 by default, changeable by cutting a trace). ...

SKU: PR-PIM335

A whole heap of LED pixels with individual brightness control, for scrolling messages, animations, and more - Scroll pHAT HD! Scroll pHAT HD packs 17x7 pixels (119 total) onto a single pHAT, and gives you full PWM brightness control over each pixel. Create beautiful animations and even anti-...

SKU: AF-3211

The Adafruit RGB Matrix Bonnet makes it easy to drive HUB75-type RGB LED matrices directly from your Raspberry Pi. Simply plug the bonnet onto any Pi with a 40-pin GPIO header, connect your matrix via the IDC cable, attach a 5 V power supply, and run the provided Python code to create colourful s...

SKU: AF-872

The Adafruit Mini 0.7" 8×8 LED Matrix with I2C Backpack makes it easy to add a bright yellow-green dot-matrix display to any project. The I2C backpack handles all the multiplexing, so you only need two data pins (SDA and SCL) plus power to control all 64 LEDs — no complex wiring or external drive...

SKU: AF-1633

The Adafruit Mini 0.7" 8×8 LED Matrix with I2C Backpack makes it easy to add a bright pure green dot-matrix display to any project. The I2C backpack handles all the multiplexing, so you only need two data pins (SDA and SCL) plus power to control all 64 LEDs — no complex wiring or external driver ...

SKU: AF-1427

The Adafruit 16×8 LED Matrix Driver Backpack is a breadboard-friendly breakout for the HT16K33 multiplexed LED driver. Unlike the pre-configured LED backpacks, this version breaks out all 16 anode and 8 cathode pins, letting you wire up any LED matrix configuration you need — up to 128 individual...

SKU: AF-5217

The Adafruit LED Glasses Driver is a slim, Bluetooth-enabled controller board built around the Nordic nRF52840 chipset. Originally designed to drive the Adafruit LED Glasses RGB LED matrix, it also works brilliantly as a compact standalone development board with built-in sensors and STEMMA QT con...

SKU: AF-1429

Control 24 channels of 12-bit PWM output with the Adafruit TLC5947 breakout board. Designed for LED control, this SPI-driven board delivers constant-current open-drain outputs that keep brightness consistent even if the power supply dips. The chainable design lets you connect as many boards as yo...

SKU: AF-5201

The Adafruit IS31FL3741 RGB LED Matrix features 117 individually addressable RGB LEDs arranged in a 13×9 grid with 3 mm pitch spacing. Each 2×2 mm LED is driven by the ISSI IS31FL3741 controller chip over I2C, providing 8-bit PWM per colour channel for full 24-bit colour across the entire display...

SKU: AF-6215 · MPN: ADA6215

A warm-white LED filament shaped as the letter "X", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: AF-877

Drive 4-digit 0.56" tall 7-segment displays with ease using this HT16K33-based I2C backpack. The driver handles all LED multiplexing over I2C, keeping your wiring simple — just two data pins for full numeric display with decimal points and colon. The backpack is stackable with address jumpers on...

SKU: AF-6198 · MPN: ADA6198

A warm-white LED filament shaped as the letter "H", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: AF-3657

The Adafruit ATSAMD09 Breakout with seesaw is a versatile I2C peripheral board built on the Adafruit seesaw framework. Seesaw is a near-universal converter that lets you add GPIO, ADC, PWM, and more to any I2C-capable microcontroller or single-board computer — all over a simple I2C connection. R...

SKU: AF-6201 · MPN: ADA6201

A warm-white LED filament shaped as the letter "J", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: AF-6206 · MPN: ADA6206

A warm-white LED filament shaped as the letter "O", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: AF-3108

Add a bright, easy-to-read numeric display to your Feather project with the Adafruit 4-Digit 7-Segment FeatherWing in red. This combo pack includes the HT16K33-based FeatherWing backpack and a matching 0.56" tall red 7-segment display with decimal points and a centre colon for clock displays. Th...

SKU: AF-3109

Add a bright, easy-to-read numeric display to your Feather project with the Adafruit 4-Digit 7-Segment FeatherWing in white. This combo pack includes the HT16K33-based FeatherWing backpack and a matching 0.56" tall white 7-segment display with decimal points and a centre colon for clock displays....

SKU: AF-6204 · MPN: ADA6204

A warm-white LED filament shaped as the letter "M", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...