All Products

SKU: AF-5466

A 10KΩ linear slide potentiometer with a built-in geared DC motor underneath the slider. The motor can move the wiper up and down programmatically, while the slider also moves freely by hand when the motor is unpowered. This combination allows both manual and digital control — commonly seen in pr...

SKU: EC-AMS320240TFT

The 2.8" TFT Touch Shield V4.3 is an Arduino-compatible display shield featuring a 240×320 colour LCD with a resistive touchscreen and onboard SD card socket. It communicates over SPI, keeping pin usage low and leaving more pins available for other components. Driven by the ILI9341 controller, t...

SKU: AF-4319

The Adafruit PyRuler is a PCB reference ruler and a fully functional CircuitPython microcontroller in one. Measuring approximately 25 × 150 mm (1" × 6"), this gold-plated FR4 ruler features common SMD component package outlines, a font size guide, trace-width diagram, and AWG wire gauge drill hol...

SKU: AF-1651

The 2.8" TFT Touch Shield with Resistive Touch Screen plugs directly into any Arduino UNO or Mega-shaped board, providing a bright, full-colour display with touch input and an onboard MicroSD card socket. Fully assembled and ready to use — no wiring or soldering required. This shield uses SPI fo...

SKU: WS-31122 · MPN: 31122

A 1.9" IPS touch LCD display module with 172 × 320 resolution and 262K colours. It combines an ST7789V2 display driver with a CST816 capacitive touch controller, providing both vivid visuals and responsive touch input in a compact form factor. The module communicates via SPI (display) and I2C (t...

SKU: SF-LCD-29986 · MPN: LCD-29986

Add a compact visual interface to your RP2350 RedBoard IoT with this Red Vision touch display shield. It plugs into the standard R3 footprint, giving your IoT project a 2.0" capacitive touch LCD without needing external display cabling.The board is designed to stack neatly with the SparkFun Red V...

SKU: AF-2478

Add a full-colour touchscreen to your project with this 2.4" TFT LCD breakout. The 240×320 pixel display delivers vivid RGB colour with individual pixel control, driven by the ILI9341 controller with built-in RAM buffering so your microcontroller does minimal work. A resistive touchscreen overlay...

SKU: AF-5020

The Adafruit NeoKey Trinkey is a USB-A development board that combines an ATSAMD21 microcontroller, a Cherry MX-compatible key switch footprint, and an RGB NeoPixel LED into one tiny plug-in package. Insert it into any USB-A port and you've got a single-key macro pad, password entry device, or cu...

SKU: DF-DFR1107 · MPN: DFR1107

The Arduino GIGA Display Shield is a touchscreen add-on designed for the Arduino GIGA R1 WiFi. Featuring a 3.97" TFT display with 480×800 resolution and 5-point capacitive touch, it makes it easy to deploy graphic interfaces for dashboards, handheld devices, and interactive projects. Beyond the ...

SKU: DF-DFR0018

This is DFRobot's basic sensor set for arduino. Set includes light sensor, touch sensor, temperature sensor, magnetic sensor, vibration sensor, tilt sensor, big button, LED lighting module and Grayscale sensor. To connect these sensors to Arduino, we suggest to use our IO expansion shield...

SKU: WS-30646 · MPN: 30646

This 7" DSI capacitive touchscreen from Waveshare features a 1280×720 IPS panel with 10-point multi-touch, toughened glass with optical bonding, and an anti-fingerprint coating. The integrated driver circuitry connects via a single FPC cable, resulting in a slim 9.3 mm total thickness. Compatibl...

SKU: AF-2770

The 2.8" TFT Display is a bare LCD module with a capacitive single-touch touchscreen. Featuring 240×320 resolution with individual RGB pixel control and a bright 4-LED backlight, it delivers vivid full-colour output for custom projects. The display is driven by the ILI9341 chipset and the touchs...

SKU: AF-5808 · MPN: ADA5808

This square TFT module is made for advanced display projects that need a high-resolution, compact screen. It has a 3.4 inch IPS panel with 480x480 full-colour pixels, giving a crisp square format with good colour visibility off-axis.The display uses an ST7701S driver with SPI for configuration an...

SKU: AF-1602

Add lots of touch sensors to your next microcontroller project with this easy-to-use 8-channel capacitive touch sensor breakout board, starring the CAP1188. This chip can handle up to 8 individual touch pads, and has a very nice feature that makes it stand out for us: it will light up the 8 onboa...

SKU: AF-3591

The Adafruit HUZZAH32 ESP32 Feather Board brings the powerful Espressif ESP32 dual-core processor into the Adafruit Feather form factor. With WiFi, Bluetooth Classic, and BLE support, a built-in USB-to-serial converter, automatic bootloader reset, and LiPo battery charging, it's a fully featured ...

SKU: AF-1141

The Adafruit Data Logging Shield makes it easy to save sensor data to an SD card with accurate timestamps. It combines an SD card interface with a real-time clock (RTC) and a prototyping area on an Arduino-compatible shield, so you can be logging data within minutes of setup. This R3-compatible ...

SKU: AF-3405

The Adafruit HUZZAH32 ESP32 Feather Board brings the powerful Espressif ESP32 dual-core processor into the Adafruit Feather form factor. With WiFi, Bluetooth Classic, and BLE support, a built-in USB-to-serial converter, automatic bootloader reset, and LiPo battery charging, it's a fully featured ...

SKU: AF-5826 · MPN: ADA5826

This square TFT display module is made for advanced projects that need a high-resolution 4 inch panel in a compact, symmetrical format. It offers 480x480 16-bit full-colour pixels and uses an IPS display, so colour remains strong up to 80 degrees off-axis in any direction.The display is driven by...

SKU: AF-4064

The Adafruit Grand Central M4 Express is a powerful development board built around the Microchip ATSAMD51P20 — a 120 MHz Cortex M4 processor with hardware floating point, 1 MB Flash, and 256 KB RAM. In the familiar Arduino Mega form factor, it brings 70 GPIO pins, dual DACs, 15 analog inputs, 8 M...

SKU: AF-3900

The Adafruit HalloWing M0 Express is a skull-shaped development board built around the ATSAMD21G18 processor. Featuring a 1.44" full-colour TFT display, a 3-axis accelerometer, a light sensor, a speaker driver, and Feather-compatible headers, it's designed for wearables, badges, cosplay props, an...