All Products

SKU: DF-SEN0312

The ME007YS is a waterproof ultrasonic distance sensor designed for non-contact liquid level measurement and other distance sensing applications. With an IP67-rated sealed probe and UART serial output, it delivers reliable readings from 28 cm to 450 cm. Operating at 5V with a simple 3-wire conne...

SKU: DF-SEN0288

A non-contact AC current sensor with a clamp-on transformer probe, capable of measuring 0–10 A AC. Simply clamp the probe around an AC line and connect the 3.5 mm plug to the signal conversion module — no wire cutting or circuit modification required. The Gravity analogue interface outputs a 0.2...

SKU: EF-EF04098

This NeoPixel-compatible rainbow LED strip features 10 individually addressable WS2812B RGB LEDs with a standard 3-pin GVS connector for easy plug-and-play use. Both ends have connectors, allowing multiple strips to be daisy-chained for longer runs. Designed to work with micro:bit at 3.3V, it's ...

SKU: DF-DFR0645-G

The Gravity 4-Digital LED Segment Display Module features a bright green 7-segment display with four digits, perfect for showing numbers, time, sensor readings, and other data in your projects. It communicates over I2C for simple two-wire connectivity with Arduino, Raspberry Pi, and other microco...

SKU: EF-EF03085

The HC-SR04 is a widely used ultrasonic distance sensor that provides non-contact measurement from 2 cm to 450 cm with up to 3 mm resolution. It uses a 40 kHz ultrasonic transducer pair — one transmitter and one receiver — to calculate distance based on the time-of-flight of a sound pulse. With ...

SKU: AF-4965

A simple, palm-sized water detection sensor that outputs a digital high signal when water or condensation is detected on its surface. The compact red PCB features interlocking traces connected to a lightly biased transistor — when water bridges two traces, the transistor switches on and the outpu...

SKU: DF-FIT0908

This kit includes two kinds of mini multi-color block building breadboards and 2 base plates of different sizes. Users can freely assemble these breadboards to make various projects combining with other microcontrollers like Arduino, Raspberry Pi, etc., or use them in circuit assembly and test in...

SKU: DF-SEN0536

The Gravity SCD41 Infrared CO2 Sensor provides accurate carbon dioxide, temperature, and humidity measurements in a single compact module. Based on Sensirion's SCD41 sensor, it uses photoacoustic NDIR (non-dispersive infrared) sensing with patented PASens and CMOSens technology for high accuracy ...

SKU: LB-FLAME-LIGHT

This IR flame sensor module detects flames and infrared light sources in the 760–1,100 nm wavelength range. With a detection angle of approximately 60° and a test range of up to 80 cm (depending on flame size), it provides both digital and analogue output for flexible integration with Arduino, Ra...

SKU: LB-LR0231

A 4×4 matrix membrane keypad with 16 tactile buttons, ideal for adding user input to microcontroller projects. The keypad uses a standard 8-pin matrix wiring scheme (4 rows × 4 columns), requiring only 8 GPIO pins to read all 16 keys. The flexible membrane design is thin and lightweight, making ...

SKU: LB-C-W

A versatile 1m USB-A to USB-C cable for everyday charging and data transfer. The standard length provides flexibility for desk setups, reaching from wall chargers, or connecting devices across your workspace. Key Features 1m Length – Versatile length for desk use, wall chargers, and general co...

SKU: LB-C-25

A compact 25cm USB-A to USB-C cable for charging and data transfer. The short length keeps your desk tidy, reduces cable clutter, and is perfect for portable power banks or tight workspaces. Key Features 25cm Length – Compact size ideal for travel, power banks, and clutter-free setups 3A Char...

SKU: AF-484

An embroidered skill badge celebrating the achievement of learning microcontrollers — from Arduino and Raspberry Pi to ARM, PIC, and beyond. A fun way to recognise and reward skill-building in classrooms, workshops, makerspaces, and Maker Faires. Key Features Iron-On or Sew-On – Iron-on backin...

SKU: DF-DFR1193 · MPN: DFR1193

The Gravity LTC4316 I2C Address Shifter resolves I2C address conflicts, allowing multiple sensors with the same address to operate on a single bus. Insert this module between your microcontroller and sensor – address conversion happens in hardware with no code changes required. Key Features Ha...

SKU: ET-2085464

A 1-metre USB Type-A male to Micro-B male cable for powering and connecting devices such as Raspberry Pi, Arduino, and other microcontrollers. Suitable for both data transfer and power delivery via any standard USB power source. Specifications Connector A: USB Type-A male Connector B: USB Mic...

SKU: DF-SEN0213

The DFRobot Gravity Heart Rate Monitor Sensor measures the electrical activity of the heart and outputs it as an analog signal. Built around the AD8232 chip, it filters and amplifies the ECG signal to produce a clean waveform from the PR and QT intervals — viewable in real time using the Arduino ...

SKU: AF-245

The 2-Axis Joystick provides analogue input for your projects using two independent 10K potentiometers — one per axis. It reports position as either voltage or resistance, making it compatible with a wide range of microcontrollers including Arduino and Raspberry Pi. The modular form factor plugs...

SKU: AF-1787

A quad level-shifting buffer IC that excels at converting 3V logic signals up to 5V. Power the 74AHCT125 with 5V and it will cleanly detect 3.3V logic inputs — particularly useful when connecting devices like Teensy 3.x to NeoPixels or other 5V peripherals. To use, apply 5V to VCC, connect GND, ...

SKU: LB-LR0001

This convenient little module allows you to control both the X-axis and Y-axis using two 10k potentiometers.  Also featured is an additional pushbutton switch providing another optional input for your project.  Compatible with Arduino, Raspberry Pi, Micro:bit and other microcontrolle...

SKU: DF-SEN0321

The Gravity IIC Ozone Sensor measures ozone (O₃) concentration from 0 to 10 ppm with 10 ppb resolution using an electrochemical sensing element. Factory-calibrated for accurate readings out of the box, it connects via I2C through DFRobot's Gravity 4-pin interface. Compatible with Arduino, ESP32,...