All Products
Showing 21-40 of 45 products · 22 unavailable products hidden
JST SH 4-pin Right Angle Connector (10-pack) - Qwiic Compatible
·
A 10-pack of JST SH 4-pin right-angle connectors with 1 mm pitch through-hole mounting tabs. These are the standard connectors used with the Qwiic and STEMMA QT ecosystems, making it easy to add I2C connectivity to your own PCB designs. The solid plastic housing accepts standard Qwiic cables, an...
SparkFun Serial Controlled Motor Driver
The SparkFun Serial Controlled Motor Driver allows you to control up to two DC motors using a serial command interface. The serial interface is easy to use and it lets the user select an individual motor, the direction, and the desired speed constant (up to 10 different speed from stop to full sp...
Adafruit ESP32-S2 Feather with BME280 Sensor - STEMMA QT
·
The Adafruit ESP32-S2 Feather with BME280 is identical to the standard ESP32-S2 Feather but with an on-board BME280 temperature, humidity, and barometric pressure sensor at I2C address 0x77. This makes it an instant IoT environmental monitor — just add Wi-Fi credentials and start logging. Built ...
Adafruit ESP32-S2 Feather - 2 MB PSRAM and STEMMA QT / Qwiic
·
The Adafruit ESP32-S2 Feather brings Espressif's single-core ESP32-S2 to the Feather ecosystem with native USB, 2.4 GHz Wi-Fi, 4 MB flash, and 2 MB PSRAM. Native USB support means it can act as a keyboard, mouse, MIDI device, or disk drive — no separate USB-to-serial chip needed. This version in...
Adafruit ESP32-S2 TFT Feather - 4MB Flash, 2MB PSRAM, STEMMA QT
·
The Adafruit ESP32-S2 TFT Feather features a built-in 1.14" IPS colour TFT display (240×135 pixels, ST7789) on the front of the board. Combined with the ESP32-S2's native USB, 2.4 GHz Wi-Fi, 4 MB flash, and 2 MB PSRAM, it provides a complete visual IoT platform in the Feather form factor. The co...
Adafruit ESP32-S3 Feather with 4MB Flash 2MB PSRAM
·
The Adafruit ESP32-S3 Feather with 4 MB Flash and 2 MB PSRAM brings the dual-core ESP32-S3 to the Feather ecosystem with Wi-Fi, Bluetooth LE, and native USB. The 2 MB PSRAM provides extra memory for large data buffers, making it well-suited for CircuitPython or projects that need fast SRAM access...
Adafruit ESP32-S3 TFT Feather - 4MB Flash, 2MB PSRAM, STEMMA QT
·
The Adafruit ESP32-S3 TFT Feather features a built-in 1.14" IPS colour TFT display (240×135 pixels, ST7789) on the front of the board. Combined with the dual-core ESP32-S3's native USB, Wi-Fi, Bluetooth LE, 4 MB flash, and 2 MB PSRAM, it provides a complete visual IoT platform in the Feather form...
Adafruit ESP32-S3 Reverse TFT Feather
The Adafruit ESP32-S3 Reverse TFT Feather places a 1.14" IPS colour TFT display (240×135 pixels, ST7789) on the back of the board, making it ideal for panel-mounted projects where the screen faces outward through an enclosure. Three user buttons (D0, D1, D2) alongside the display provide a comple...
Adafruit PiCowbell Adalogger for Pico - MicroSD, RTC & STEMMA QT
The Adafruit PiCowbell Adalogger is a Pico-sized add-on board that sockets underneath your Raspberry Pi Pico or Pico W, adding a microSD card slot, real-time clock with battery backup, and a STEMMA QT connector for I2C sensors — everything you need for data logging projects. The PCF8523 RTC keep...
Adafruit Matrix Portal S3 CircuitPython Powered Internet Display
The Adafruit Matrix Portal S3 is the next-generation plug-and-play controller for HUB-75 RGB LED matrix panels. Powered by the ESP32-S3 with built-in WiFi and Bluetooth LE, it plugs directly into the back of any compatible matrix — no soldering or wiring required. Just attach power and start codi...
Adafruit Metro RP2040
The Adafruit Metro RP2040 brings the Raspberry Pi RP2040 dual-core processor to the standard Metro/UNO shield-compatible form factor. With 16 MB of QSPI flash, a microSD card slot, USB-C, and a rich set of debugging ports, this board is an excellent platform for CircuitPython, Arduino, MicroPytho...
Adafruit ESP32-S3 Feather 8MB with w.FL Antenna
·
The Adafruit ESP32-S3 Feather with w.FL Antenna features the dual-core ESP32-S3 with Wi-Fi, Bluetooth LE, and native USB in the Feather form factor, plus a w.FL (MHF3/IPEX3) connector for attaching an external 2.4 GHz antenna. This makes it ideal for enclosed installations or when you need improv...
Qwiic MultiStar Constellation Ornament
·
Need more Qwiic ports without forcing every board into a single daisy chain? This star-shaped Qwiic MultiStar acts as a hub for the I2C bus, adding four extra usable Qwiic ports to a board that only has one.The board has five Qwiic connectors in total. One connects back to your main board, leavin...
JST PH 4-pin Horizontal Connector (10-pack)
·
Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of our favorite 2mm pitch connector - the JST PH 4 pin. These are the horizontal style. You can use these with any of our JST PH 4 / STEMMA cables. They're not STEMMA QT compatible (those...
JST-SH Horizontal 4-Pin SMD Connector - 1.0mm Pitch
·
This tiny four-pin connector is a compact option when you need a very small board-to-cable connection. It uses the smaller JST-SH style rather than the larger JST connectors commonly found on many breakout boards.The connector has a horizontal orientation and is intended for surface-mount install...
Adafruit NeoPixel Pebble/Seed LED Strand - 100 LEDs, 100mm Pitch
·
This strand puts tiny NeoPixel “pebbles” or “seeds” along solid plated wires, making it easier to add dots of colour to costumes, props, wearables and embedded structures than a flexible PCB strip that can crack when over-bent.Each soft plastic wire strand has a coated NeoPixel every 100mm / 4 in...
JST SH 4-pin Vertical Connector (10-pack)
·
A 10-pack of JST SH 4-pin vertical connectors with 1 mm pitch through-hole mounting tabs. These micro connectors are compatible with the Qwiic/STEMMA QT ecosystem, making them perfect for adding I²C connectivity to custom PCBs. The solid plastic housings feature through-hole pins that can also b...
E-Textiles LilyPad Compatible USB - ATmega32U4 Board
A LilyPad-compatible microcontroller board based on the ATmega32U4, designed for e-textile and wearable electronics projects. The built-in USB communication allows the board to appear as a mouse, keyboard, or virtual serial port when connected to a computer — no separate USB-to-serial adapter nee...
Adafruit Feather RP2350
·
The Adafruit Feather RP2350 brings the powerful RP2350 microcontroller to the classic Feather form factor, giving you full compatibility with the entire FeatherWing ecosystem. With dual Cortex-M33 cores running at 150 MHz, 520 KB of SRAM, and 8 MB of flash, this board delivers roughly twice the p...
Thing Plus RP2350 Wireless Development Board
·
Build connected sensor nodes, data loggers and battery-powered IoT projects around Raspberry Pi’s RP2350 microcontroller. This Thing Plus board adds wireless connectivity, extra memory and the familiar Feather-compatible footprint in a compact development platform.The RP2350 can run two selected ...
