All Products

SKU: SF-GPS-21801

The SPK6618H is the latest advancement in GNSS antenna technology allowing tri-band (L1/L2/L5) reception for GPS, GLONASS, Galileo, and BeiDou constellations. These 'UFO' antennas have incredible performance for the money. The antenna has a built in ground plane with significant filtering and amp...

SKU: SF-GPS-15192

The ANN-MB-00 GNSS multiband antenna is extremely unique from other GNSS/GPS antennas in that it is designed to receive both the classic L1 GPS band and the newly launched (started in 2005) L2 GPS band. Additionally, the ANN-MB-00 from u-blox is extremely well built with both a magnetic base with...

SKU: DF-KIT0198-EU · MPN: KIT0198-EU

This GNSS-RTK kit is a complete base-and-rover positioning setup for projects that need centimetre-level location data. It uses Real-Time Kinematic correction, with a stationary base station sending RTCM correction data over an integrated LoRa 868MHz link to the mobile RTK unit.The system is buil...

SKU: DF-KIT0198-US · MPN: KIT0198-US

This dual-module GNSS-RTK kit brings a base station and mobile rover together for high-precision positioning projects. It uses Real-Time Kinematics, where the stationary base station sends correction data to the moving rover to reduce common GNSS errors and deliver centimetre-level positioning.Th...

SKU: SF-GPS-30975 · MPN: GPS-30975

Built around the u-blox ZED-F9T-20B receiver, this breakout is made for projects where precise time matters as much as location. Under clear skies it can provide five nanoseconds of timing accuracy without requiring external GNSS correction data, making it suitable for 5G IoT networks, distribute...

SKU: JU-JU-W-LP257 · MPN: JU-W-LP257

Some people just don't know your true potential. Maybe they undervalue the things you can do, or always expect less from you. But they don't know who they're dealing with! You've got this! You can do whatever you put your mind to. Wear this lapel pin with pride and confidence. Challenge the worl...

SKU: JU-R-E121

You made it out of bed, got to the shower (perhaps), and got out of your PJs. Congratulations — you deserve a medal! This colourful "Got Dressed Today" lapel pin from Jubly-Umph is the perfect reward for life's small victories. Beautifully crafted in hard enamel with a gold-backed finish, this l...

SKU: DF-SER0011

This is a metal gear servo(2.5kg) from Goteck.It's very small, lightweight, and powerful! Metal gear for longer wear life and extra strength in demanding applications. Perfect for use in medium-sized electric airplanes,helicopters or mini Robots. SPECIFICATIONS Operating voltage...

SKU: SF-BOB-00549

Use this unique device to download data and control GPIB bus enabled oscilloscopes, logic analyzers, function generators, power supplies, and any other GPIB instrument seamlessly through USB! Features: Drivers for Windows 98/ME/2000/XP/Vista/Win7, Mac OS-8/9/X, Linux Support for multiple devic...

SKU: LB-LR0387

This is the assembled version of the Pi T-Cobbler Plus.  It only works with the Raspberry Pi Model Zero, A+, B+, Pi 2, Pi 3 & Pi 4! (Any Pi with 2x20 connector)Each order comes with a 40 pin ribbon cable and assembled T-Cobbler Plus. You can plug the 40-pin GPIO cable between th...

SKU: LB-LS3513

Expand your Raspberry Pico projects with the GPIO Expansion Board from YWRobot! This essential accessory empowers makers, educators, and hobbyists to effortlessly expand their GPIO capabilities, opening up a world of possibilities for your creative endeavors. Key Features: Expanded GPIO Access...

SKU: AF-4855

A 2×2 (4-pin) female socket riser header with standard 2.54 mm (0.1 in) pitch, designed to fit the PoE header on the Raspberry Pi 3 B+ and 4. Use it alongside a 2×20 stacking header to raise the PoE HAT high enough to stack another HAT underneath. Specifications Configuration – 2×2 (4-pin) fem...

SKU: PI-COM1105

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT. If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers might be just t...

SKU: AF-3413

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers from Pimoroni might be just what you need. They come in both male and female, and use crafty little retaining nubbins to grip tightly into the holes on the PCB. Ab...

SKU: AF-2222

Connect your own PCB to a Raspberry Pi B+ with this normal-height female header.  The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has 3mm of pins, compared with our stacking version which is the same base height but ...

SKU: PI-COM0004

This extra-tall 2×20 female header is designed to connect custom PCBs and HATs to the Raspberry Pi GPIO pins. At 16.5 mm tall, it provides enough clearance for your board to sit above the Ethernet and USB jacks without interference. The header has 3 mm pin length on the underside, so there's no ...

SKU: AF-1992

Connect your own PCB to a Raspberry Pi B+ with this extra-tall female header. The female header part has extra spaces to make it 16.5mm tall: when placed on your Pi, a PCB will clear the Ethernet and USB jacks. This header has 3mm of pins, compared with our stacking version which is ...

SKU: AF-1658

Connect your own PCB to a Raspberry Pi with this extra-tall female header. The female header part has extra spaces to make it 13.6mm tall: when placed on your Pi, a PCB will clear the Ethernet and USB jacks. This header has 3mm of pins, compared with our stacking version which is the same base...

SKU: EC-RA000022RK

The GPIO extension kit used for extending the GPIO interface on Raspberry Pi B+, it helps you break out all those tasty power, GPIO, I2C and SPI pins from the 40 pin header of Raspberry Pi B+ onto a breadboard.There is also the GPIO board and GPIO Cable for the Model B.Corresponding Interface Pin...

SKU: AF-5294

This 20-pin GPIO ribbon cable provides a clean, reliable connection between PCBs, development boards, and breakout headers. The soft, flexible 0.05″ ribbon cable with keyed IDC connectors on both ends ensures correct orientation every time. Pin 1 is marked with a pink stripe along the side of th...