All Products

SKU: LB-LS3381-R

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in red, pre-wired with 20 cm red and black leads for easy connection. Normally open — pressing the button closes the contacts. Key Features Pre-Wired – 20 cm red and black leads attached, no soldering required Momentary A...

SKU: LB-LS3381-W

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in white, pre-wired with 20 cm red and black leads for easy connection. Normally open — pressing the button closes the contacts. Key Features Pre-Wired – 20 cm red and black leads attached, no soldering required Momentary...

SKU: LB-LS3381-Y

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in yellow, pre-wired with 20 cm red and black leads for easy connection. Normally open — pressing the button closes the contacts. Key Features Pre-Wired – 20 cm red and black leads attached, no soldering required Momentar...

SKU: LB-LR0589-YELLOW

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in yellow. Normally open — pressing the button closes the contacts. The dome design provides a satisfying tactile feel and sits flush with the panel surface. Key Features Momentary Action – Normally open, closes on press ...

SKU: SF-PRT-18987 · MPN: PRT-18987

This is a simple 12-pin male straight header for plated through-hole (PTH) connections. It is handy for adding pins to PCBs, breakout boards and other projects that use the standard 0.1 inch header spacing.If you do not need the full 12-pin length, the header can be broken apart into smaller sect...

SKU: SF-COM-21409 · MPN: COM-21409

This female header provides 12 positions on a standard 0.1 inch pitch, making it suitable for compact board-to-board connections and prototyping layouts.It is designed for surface-mount applications where through-hole pins are not practical. The surface-mount legs are staggered to help provide st...

SKU: SF-PRT-21505 · MPN: PRT-21505

This 12-position screw terminal block is a simple way to make secure wire connections on a PCB or prototyping board. Each position uses a screw clamp, making it handy for bringing external wiring into a circuit without soldering the wire directly to the board.The 3.5mm pitch is designed to line u...

SKU: SF-COM-22001 · MPN: COM-22001

A compact surface-mount Zener diode for adding voltage regulation or protection to space-constrained designs.It comes in an SOD-323 package, making it well suited to small PCBs and repairs where board space is limited. Use it for simple reference, clamping, and protection tasks within its rated l...

SKU: LB-12V3A

A regulated 12V 3A (36W) switching power supply that comes with multiple interchangeable DC plug adapters for compatibility with a wide range of 12V devices. Suitable for powering routers, LED strips, single-board computers, and other 12V electronics. Key Features 12V 3A Output – 36W regulated...

SKU: AF-798

Warning: This is a US-plug adapter and is not certified for use in Australia. Only purchase if you are using it outside Australia or with an appropriate plug adapter. A regulated 12V DC switching power adapter delivering up to 1000mA (1A). The slim profile fits into power strips without blocki...

SKU: TB-MP3147

This ultra-slim switchmode plug pack delivers 12V DC at 400 mA (4.8W) from a standard Australian/NZ mains outlet. Its slim profile allows multiple adaptors to sit side by side on a power board without blocking adjacent outlets — a common frustration with bulkier plug packs. The adaptor comes wit...

SKU: DF-FIT0493

A 12V DC gear motor with an integrated quadrature encoder, ideal for mobile robot platforms and closed-loop motor control. The 34:1 gearbox provides a no-load speed of 350 RPM with a stall torque of 12 kg·cm, and the encoder delivers 374 pulses per revolution of the output shaft for precise speed...

SKU: AF-448

A 12V EL (electroluminescent) wire and tape inverter for fixed installations and larger EL projects. Unlike pocket-sized 2×AA inverters, this brick-style inverter runs from a 12V DC input — connect it to a wall adapter for permanent setups, or use a larger battery pack (such as 8×AA) for extended...

SKU: DF-FIT0843

An ultra-thin flexible LED strip in ice blue, measuring just 2.5 mm wide and 1 mm thick. With 120 SMD 0805 LEDs per metre, this 1-metre strip runs on 12V DC and can be cut every 3 LEDs to fit your exact length requirements. The incredibly slim profile makes this strip ideal for lighting in tight...

SKU: DF-FIT0842

An ultra-thin flexible LED strip in yellow, measuring just 2.5 mm wide and 1 mm thick. With 120 SMD 0805 LEDs per metre, this 1-metre strip runs on 12V DC and can be cut every 3 LEDs to fit your exact length requirements. The incredibly slim profile makes this strip ideal for lighting in tight s...

SKU: LB-LS1017-280

The GA25-370 is a compact 12V DC gear motor with metal gears and a built-in speed encoder for closed-loop control. Running at 280 RPM, it provides a good balance of speed and torque for small robotics and automation projects. Key Features Built-In Speed Encoder – Real-time speed feedback for P...

SKU: LB-LS1017-60

The GA25-370 is a compact 12V DC gear motor with metal gears and a built-in speed encoder for closed-loop control. This 60 RPM variant uses a higher gear ratio for increased torque at lower speed, making it well-suited for applications that need precise, controlled movement. Key Features Built...

SKU: LB-LS0112-280

The JGA25-370 is a compact 12V DC gear motor with metal gears, delivering 280 RPM at 12V. This variant does not include a speed encoder, making it a simpler and more affordable option for projects that don't require closed-loop feedback. Key Features 280 RPM – At 12V nominal voltage Metal Gea...

SKU: LB-LS0112-60

The JGA25-370 is a compact 12V DC gear motor with metal gears, delivering 60 RPM at 12V. The higher gear ratio provides increased torque at lower speed, making it well-suited for applications needing slow, controlled movement. This variant does not include a speed encoder. Key Features 60 RPM ...

SKU: DF-FIT0277

The DFRobot 12V Low Noise DC Motor (Model 28PA51G) is a quiet, high-torque geared motor with a built-in two-phase hall encoder. Designed for applications where noise is a concern, it produces approximately 57–68 dBA under no-load conditions — making it well suited for indoor robotics and equipmen...