All Products

SKU: SF-WRL-09143

A 900/1800MHz dual-band duck antenna with 2dBi gain and an RP-SMA connector. Well suited for XBee 900MHz modules and other 900MHz radio applications. 50-ohm impedance, 105mm long. Specifications Frequency – 900/1800MHz dual-band Gain – 2dBi Connector – RP-SMA Impedance – 50 ohm Length – 10...

SKU: AF-945

A 200 mm (8″) swivel dipole antenna with 5 dBi gain and an RP-SMA connector — the industry-standard fitting found on most WiFi routers and wireless modules. The higher gain compared to the 2 dBi version extends range at the cost of a larger form factor. The swivel joint lets you angle the antenna...

SKU: SF-GPS-30777 · MPN: GPS-30777

SparkPNT GNSSDO+ is a high-precision time and frequency reference built around the Septentrio mosaic-T GNSS module and a Rakon STP3593LF double-oven OCXO. It is intended for demanding timing applications where stable 10MHz and pulse-per-second references are needed, including labs, server racks a...

SKU: SF-WRL-00145

A 2.4 GHz rubber duck antenna with 2.2 dBi gain and a reverse-polarity SMA (RP-SMA) connector. At 100 mm (4″) long with 50 Ω impedance, it's a straightforward way to add an external antenna to WiFi, Bluetooth, ZigBee, or other 2.4 GHz RF modules. Key Features 2.2 dBi Gain – Omni-directional co...

SKU: SF-WRL-00558

A large 2.4 GHz rubber duck antenna with 5 dBi gain and a reverse-polarity SMA (RP-SMA) connector. At 196 mm (7.7″) long, it provides significantly more range than smaller duck antennas — ideal when you need to push your wireless link further. Key Features 5 dBi Gain – Higher gain for extended...

SKU: SF-GPS-23088 · MPN: GPS-23088

The SparkFun Triband GNSS RTK Breakout features Septentrio's mosaic-X5, an ultra-low power multi-band, multi-constellation GNSS receiver capable of delivering centimeter-level precision. Supporting L1, L2, and L5 bands simultaneously, this breakout provides access to GPS, GLONASS, Beidou, Galileo...

SKU: SF-WRL-22631 · MPN: WRL-22631

XBee RR 802.15.4 RF Modules are embedded solutions providing wireless end-point connectivity to devices. These devices use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking. They are designed for high-throughput applications requiring low latency and pr...

SKU: SF-WRL-22630 · MPN: WRL-22630

XBee RR 802.15.4 RF Modules are embedded solutions providing wireless end-point connectivity to devices. These devices use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking. They are designed for high-throughput applications requiring low latency and pr...

SKU: SF-WRL-22628 · MPN: WRL-22628

XBee RR 802.15.4 RF Modules are embedded solutions providing wireless end-point connectivity to devices. These devices use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking. They are designed for high-throughput applications requiring low latency and pr...

SKU: SF-WRL-22626 · MPN: WRL-22626

XBee RR 802.15.4 RF Modules are embedded solutions providing wireless end-point connectivity to devices. These devices use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking. They are designed for high-throughput applications requiring low latency and pr...

SKU: SF-WRL-22629 · MPN: WRL-22629

XBee RR 802.15.4 RF Modules are embedded solutions providing wireless end-point connectivity to devices. These devices use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking. They are designed for high-throughput applications requiring low latency and pr...

SKU: SF-KIT-27213 · MPN: KIT-27213

This kit brings together the main parts needed to evaluate and deploy a LoRaWAN® IoT sensor system: a Digi HX15 Gateway for LoRaWAN®, a SparkFun IoT Node for LoRaWAN® board and a SparkFun ENS160/BME280 Qwiic Environmental Combo Board.The IoT Node ships with firmware installed that automatically c...

SKU: SF-WRL-12569

This is the XBee WiFi Module with RP-SMA connector from Digi. XBee WiFi embedded RF modules provide simple serial to IEEE 802.11 connectivity. By bridging the low-power/low-cost requirements of wireless device networking with the proven infrastructure of 802.11, the XBee WiFi creates new wireless...

SKU: DF-FIT0847 · MPN: FIT0847

The DT71 is a compact set of digital measuring tweezers that combines multifunction component measurement, a miniature waveform signal generator and fully differential input measurement in one portable tool.Its three-section split design includes a controller, measuring arm and tweezer head that ...

SKU: DF-TEL0020

This is the XBee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontroll...

SKU: SF-WRL-21604 · MPN: WRL-21604

The BMD-34 series is a compact, surface-mount multiprotocol RF module for low-power embedded designs needing Bluetooth 5, Thread or Zigbee connectivity at 2.4 GHz. It is based on the Nordic nRF52840 and combines an Arm Cortex-M4 with FPU, integrated radio and hardware cryptographic engine in a re...

SKU: SF-WRL-22627

XBee RR 802.15.4 RF Modules are embedded solutions providing wireless end-point connectivity to devices. These devices use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking. They are designed for high-throughput applications requiring low latency and pr...

SKU: AF-3166

This silicone-insulated wire is exceptionally flexible and soft while remaining impressively tough — making it the go-to choice when standard PVC-covered wire can't keep up. Its silicone sheath handles extreme temperatures and high voltages without stiffening, cracking, or becoming brittle over t...

SKU: EC-CBL37551BE

The Elecrow Bluetooth Bee is a Bluetooth V2.0+EDR serial module in an XBee-compatible form factor. It provides transparent wireless serial communication at up to 2.4 GHz, making it easy to add Bluetooth connectivity to any project with an XBee socket — no additional wiring required. Based on the...

SKU: DF-TEL0067

The RN-XV module by Roving Networks is a certified Wi-Fi solution especially designed for customer who want to migrate their existing 802.15.4 architecture to a standard TCP/IP based platform without having to redesign their existing hardware. In other words, if your project is set up for X...