All Products

SKU: DF-DFR0071

The DFRobot SD Module (DFR0071) is a breakout board that adds standard SD and Micro SD (TF) card storage to your Arduino projects. Use it for data logging, file storage, and transferring data between your microcontroller and removable flash memory. The module sits directly on top of an Arduino b...

SKU: AF-6038 · MPN: ADA6038

The Adafruit SPI Flash SD Card breakout features an XTSD 2 GB chip — an SD card in an SMT package that you can wire up like standard SPI flash but use with existing SD card libraries. It comes pre-formatted as a 2 GB FAT volume and works straight away with the built-in SD library in Arduino or th...

SKU: LB-LR0045

Easily add SD card read/write capabilities to your Arduino projects with this SD card interface module. Designed for simple integration, this module breaks out the standard SD card slot and allows your Arduino to read and write to the card with ease. Featuring a built-in switch to select the fla...

SKU: AF-4899

The Adafruit SPI Flash SD Card breakout features an XTSD 512 MB chip — an SD card in an SMT package that you can wire up like standard SPI flash but use with existing SD card libraries. It comes pre-formatted as a 512 MB FAT volume and works straight away with the built-in SD library in Arduino o...

SKU: DF-DFR0229

This is a Micro SD(TF) module from DFRobot. It is compatible with TF SD card (commonly used in Mobile Phone) which is the most tiny card in the market. SD module has various applications such as data logger, audio, video, graphics. This module will greatly expand the capbility an Arduino c...

SKU: EC-MCA02328UNO

The Crowduino Uno-SD mainboard is a microcontroller board that completely compatible with the Arduino UNO. It is based on the Atmega328P, which is widely also used in the Arduino Uno and other Arduino compatible boards. Compared to the previous Crowduino with Atmega328, , the Uno SD mainboard use...

SKU: AF-1141

The Adafruit Data Logging Shield makes it easy to save sensor data to an SD card with accurate timestamps. It combines an SD card interface with a real-time clock (RTC) and a prototyping area on an Arduino-compatible shield, so you can be logging data within minutes of setup. This R3-compatible ...

SKU: SF-PRT-12769

Add SD card storage to your next project with this simple, through-hole SD/MMC socket. SD and MMC cards communicate over an SPI serial bus (as well as a 4-bit proprietary bus), making them easy to interface with microcontrollers like Arduino, PIC, and many others — ideal for data logging, audio p...

SKU: EC-ACM36620M

A simple, yet powerful, 32-bit extension of the Arduino UNO platform. And we design this Crowduino- M0-SD board for you. This board also powered by Atmel’s SAMD21 MCU, featuring a 32-bit ARM Cortex® M0 core. The power of its Atmel’s core gives this board an upgraded flexibility and boosts the ...

SKU: EC-ASC7503RTC

The RTC Data Logger Shield adds SD card storage and a real-time clock to your Arduino, making it straightforward to log timestamped sensor data. It supports SD, SDHC, and microSD TF cards via an onboard toggle switch to select the card type. The shield is compatible with 3.3V and 5V logic levels...

SKU: AF-4682

The Adafruit Micro SD SPI or SDIO Card Breakout Board gives you fast microSD card access using either standard SPI or the higher-speed SDIO protocol. Unlike SPI-only breakouts, this board exposes the full SDIO bus with up to 4 data pins for significantly faster read/write speeds — roughly double ...

SKU: AF-3653

Add WiFi connectivity to your Arduino-compatible board with the Adafruit WINC1500 WiFi Shield, featuring the FCC-certified ATWINC1500 module from Atmel. This 802.11b/g/n shield supports WEP, WPA, and WPA2 encryption with TLS 1.2 for secure connections, and communicates over SPI at speeds up to 12...

SKU: DF-KIT0131 · MPN: KIT0131

Build a DIY water quality monitor for field studies, teaching or environmental projects with the KnowFlow Basic Kit. This Arduino-based kit measures two key water parameters: pH and electrical conductivity (EC).Data can be recorded automatically to a micro-SD card for later analysis, and the Blun...

SKU: EC-AMS320240TFT

The 2.8" TFT Touch Shield V4.3 is an Arduino-compatible display shield featuring a 240×320 colour LCD with a resistive touchscreen and onboard SD card socket. It communicates over SPI, keeping pin usage low and leaving more pins available for other components. Driven by the ILI9341 controller, t...

SKU: AF-249

This pack includes everything you need to build a light and temperature data logger with an Arduino. The Adafruit data logger shield records sensor readings to an SD card with real-time timestamps, while the included photocell and TMP36 temperature sensor provide light level and temperature measu...

SKU: DF-DFR0219

Our IO expansion board is evolving, the RS485 IO Expansion Shield is now supporting Xbee and has colour coded pin header. It combines our popular Xbee shield with IO expansion shield. It even supports SD module card which provides the ultimate functional expansion for Arduino so far. As ...

SKU: AF-3654

Add WiFi connectivity to your Arduino-compatible board with the Adafruit WINC1500 WiFi Shield, featuring the FCC-certified ATWINC1500 module from Atmel. This 802.11b/g/n shield supports WEP, WPA, and WPA2 encryption with TLS 1.2 for secure connections, and communicates over SPI at speeds up to 12...

SKU: SF-BOB-12941

With SD and MMC memory prices dropping, the time is right for mass storage and datalogging. This breakout board will allow you to breakout the SD/MMC socket to a standard .1" 10-pin header. Perfect for breadboarding and the likes. Board comes fully assembled and tested as shown. Dimensions: 1.3"...

SKU: AF-4285

Give your Arduino project WiFi connectivity with the Adafruit AirLift Shield. This shield uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your main microcontroller can focus on your application logic. The ESP32 communicates ov...

SKU: EC-MCS01107S

The GPS Shield is based on the u-blox NEO-6M receiver module and plugs directly into Arduino UNO, Mega, and compatible boards. It provides GPS positioning data via a serial port connection (pins configurable to D0–D7) and includes a micro SD card slot for data logging. An active IPC antenna is i...