All Products

SKU: AF-628

A complete starter pack for getting into electroluminescent (EL) panels. Includes a 10 × 10 cm white EL panel, a portable battery-powered inverter, and AAA batteries — everything you need to start glowing right out of the box. The 4×AAA inverter drives a single panel and provides approximately 1...

SKU: AF-4028

Get started with CircuitPython using this all-in-one starter kit built around the Adafruit ItsyBitsy M4 Express. The ItsyBitsy M4 packs a 120 MHz ATSAMD51 Cortex M4 processor with floating point support, 512 KB flash, and 192 KB RAM into a compact, breadboard-friendly form factor — more than enou...

SKU: AF-632

A complete starter pack for electroluminescent (EL) tape projects, including a 1 m aqua EL tape strip, a portable battery-powered inverter, and batteries. Everything needed to get started with EL lighting right out of the box — no additional components required. Key Features Complete Kit – EL ...

SKU: AF-627

A complete starter pack for your first electroluminescent (EL) panel project. Includes a 10 × 10 cm aqua EL panel, a portable battery-powered inverter, and batteries — everything needed to get glowing straight out of the box. The 4×AAA inverter is powerful enough to drive the included panel for ...

SKU: AF-2218

The TFP401 breakout is a compact HDMI/DVI decoder that outputs raw 24-bit colour pixel data to 40-pin TTL displays. It decodes unencrypted video at any resolution from 25–165 MHz pixel clock (up to 1080p) and includes a built-in backlight driver with PWM dimming control. Designed for use with si...

SKU: AF-2680

OK you've signed up for Adafruit.io and you're ready to build something cool and Internet-connected. All you need is this starter kit which will get you going with lots of parts that go very well with our service and are the most common sensors and actuators you may want. Sense light, motion, ...

SKU: AF-584

A little bundle to get you started! This project pack contains: 2.5 meters (over 8 ft) of high-brightness, long-life EL wire in Green. 2.5 meters is the maximum amount for the pocket driver - it is cut and soldered so it's ready to go! Pocket EL inverter runs on 2 AA Alkaline or recharge...

SKU: AF-2076

These 2×23 male headers plug directly into the side sockets on the BeagleBone Black, allowing you to attach prototype PCBs or capes. Each pack includes two headers — one for each side of the BeagleBone Black. Key Features 2×23 Pin Layout – Matches the BeagleBone Black expansion headers 2.54 m...

SKU: AF-586

A little bundle to get you started! This project pack contains: 2.5 meters (over 8 ft) of high-brightness, long-life EL wire in Orange. 2.5 meters is the maximum amount for the pocket driver - it is cut and soldered so it's ready to go! Pocket EL inverter runs on 2 AA Alkaline or recharg...

SKU: AF-633

Get glowing in seconds with our Electroluminescent (EL) Tape Starter Pack! This pack contains everything you need for your first EL tape project, even the batteries. Includes: 1 meter long x 1 cm wide EL tape strip in Blue Portable 4xAAA inverter powerful enough to drive a full meter of s...

SKU: AF-4352

Build a handheld light-up button controller with this complete kit that pairs the Adafruit 4×4 NeoTrellis RGB Driver with a Feather M4 Express inside an elegant laser-cut acrylic enclosure. The 16 silicone buttons each have individually addressable NeoPixels underneath, and the seesaw I2C chip ha...

SKU: AF-1737

A compact wireless QWERTY keyboard with a USB dongle, ideal for pairing with a Raspberry Pi, BeagleBone, or any computer with a USB port. The slim chiclet-style keys provide a comfortable typing experience in a small footprint. The wireless USB dongle is plug-and-play — it shows up as a standard...

SKU: AF-6020 · MPN: ADA6020

DescriptionElevate your Bus Pirate 5 experience with this premium accessory. This keyed and locking probe cable, crafted from soft and flexible silicone-coated wire, connects seamlessly to the Bus Pirate's 10-pin main header. The 2.54mm Dupont connectors at each end are compatible with a variety...

SKU: AF-4197

Add a crisp, paper-like display to your microcontroller project with the Adafruit 2.13" Monochrome eInk Breakout. This 250×122 pixel black-and-white eInk panel delivers excellent daylight readability and retains its image even with power completely disconnected — just like printed paper. An onbo...

SKU: AF-4204

A mixed pack of 25 diffused 10 mm LEDs in five colours — white, blue, green, yellow, and red (5 of each). The large diffused lens provides wide-angle visibility and even light output, making these LEDs easy to see in daylight and from any direction. Breadboard-compatible with standard through-ho...

SKU: AF-631

Get glowing in seconds with our Electroluminescent (EL) Tape Starter Pack! This pack contains everything you need for your first EL tape project, even the batteries. Includes: 1 meter long x 1 cm wide EL tape strip in Red Portable 4xAAA inverter powerful enough to drive a full meter of st...

SKU: AF-4464

The Adafruit ICM-20649 breakout features a wide-range 6-DoF IMU capable of measuring up to ±30g acceleration and ±4000°/s gyroscope rotation — roughly double the range of standard IMUs. When typical ±16g accelerometers and ±2000°/s gyros aren't enough, this sensor delivers the extended measuremen...

SKU: AF-4557

An aluminium mounting bracket for installing microcontrollers and single-board computers onto standard DIN rail. Ideal for simplifying wiring in control panels, enclosures, and industrial-style builds. No soldering required — simply mount your board using the included M2.5 standoffs. Compatibili...

SKU: AF-2030

PowerBoost is the perfect power supply for your power-hungry portable project! This little DC/DC boost converter module can run from 1.8V batteries or higher, and convert that voltage to 5.2V DC for running your 5V projects. With a beefy 4A DC/DC converter, it can give you 1A+ from as low as 2...

SKU: AF-2651

The BMP280 from Bosch is a precision barometric pressure and temperature sensor, and the next-generation upgrade to the BMP085/BMP180/BMP183 family. With support for both I2C and SPI communication, it offers flexibility for a wide range of weather sensing and altitude estimation projects. With ±...