All Products
Showing 1-20 of 60 products
White Nylon Screw and Mounting Kit -M2
The mounting kit is an M2 screw set with screws, nuts and a variety of lengths of single-head, double-pass white nylon columns, for a total of 260 pieces. The M2-size screw set is suitable for motherboards, sensors or other devices with M2 mounting holes (2mm). Accessories made of Nylon means the...
White Nylon Screw and Stand-off Set – M2.5 Thread
·
A comprehensive 420-piece white nylon screw and standoff set in M2.5 thread — the standard mounting size for most breakout boards, development boards, and single-board computers including Raspberry Pi, Feather, and similar platforms. Comes in a snap-open storage box. Nylon hardware is non-conduc...
Metal Screw Nut and Mounting Kit -M2
The mounting kit is an M2 screw set with screws, nuts and a variety of lengths of single-head, double-pass hexagonal copper columns, for a total of 320 pieces. The M2-size screw set is suitable for motherboards, sensors or other devices with M2 mounting holes (2mm). The metal material ensures the...
Pogo-a-go-go Solderless GPIO Pogo Pins
Fit a pHAT to your Raspberry Pi Zero without soldering! These spring-loaded pogo pins provide a reliable electrical contact between your Pi Zero and pHAT, making it quick and easy to swap boards between projects with no tools required. Specially engineered to be just the right size for a solid c...
Premium Pi standoff selection
Specifically selected for Pi HATs and pHATs this standoff selection also includes male to female standoffs to allow you to stack your boards securely Contents 4 x 10mm M2.5 F-F standoff 4 x 10mm M2.5 M-F standoff 8 x 6mm screw Don't need all of these options? We also have our standard sta...
Nylon Spacer: 10mm Length, 5mm OD, 3.3mm ID (25-Pack)
Nylon spacers for separating components, PCBs, and panels in your electronics projects. These lightweight, non-conductive spacers are compatible with #2, #4, #6, M2, and M3 screws. Specifications Length – 10 mm (0.39") Outer Diameter – 5 mm (0.20") Inner Diameter – 3.3 mm (0.13") Material –...
Nylon Spacer: 12mm Length, 5mm OD, 3.3mm ID (25-Pack)
Keep your components separated with this 25-pack of 12mm-long (0.47") nylon spacers. These spacers have an outer diameter (OD) of 5 mm (0.20") and an inner diameter (ID) of 3.3 mm (0.13"), and they work with #2, #4, #6, M2, and M3 screws.
GPIO Terminal Block Breakout Board Module for Raspberry Pi
This terminal block breakout module comes fully assembled and soldered, ready for use with Raspberry Pi boards.It is compatible with Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, and Pi Zero W.The module features 2.54 mm (0.1″) pitch terminal blocks su...
Leopard Imaging Camera Mounting Hardware Kit
This hardware kit consists of 4 each of M2 style nylon hex nuts and screws. It is designed for use with the Leopard Imaging Camera, but can be used for other mountings as well.This hardware set is identical to what is included in our JetBot kit options.
MiniQ Discovery Robot Kit
The MiniQ Discovery Robot Kit is a 2WD mobile robot platform based on the MiniQ chassis and the Romeo V2 All-in-One Arduino-compatible controller. It comes with a Sharp GP2Y0A21 distance sensor and 9g micro servo pre-included, making it ready for obstacle avoidance and sensor-based navigation rig...
Black Nylon Screw and Stand-off Set – M2.5 Thread
·
Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for days on end! M2.5 size screws fit almost all of the Adafruit breakout/dev board mounting holes (2.5mm or 0.1" drill holes). Works g...
M2.5-0.45 x 8mm Phillips Pan Head Machine Screw
·
This M2.5-0.45 machine screw is a small Phillips-head fastener suited to electronics assemblies, enclosures and board mounting jobs.The 8.0mm long thread is handy for Raspberry Pi pHAT standoffs and other compact hardware builds. It is made from steel with a zinc finish to DIN7985A.Sold individua...
Stacking M2.5 Hardware Kit for STEMMA QT and RP2040 Trinkey
·
Here is the perfect hardware kit to make a RP2040 QT Trinkey into any kind of USB-connected smart sensor with a QT-sensor-sandwich! You can assemble it with just a plain Phillips screwdriver. Takes less than a minute to bolt on your favorite STEMMA QT or Qwiic board on top. And best of ...
SMT Steel Spacer with Internal M2.5 Thread
·
This round steel SMT spacer provides an internal M2.5 thread for creating a compact threaded mounting point directly on a PCB or assembly.It is reflow compatible, so it can be placed during surface-mount assembly and soldered using solder cream. The spacer has a tin surface finish and is supplied...
M2.5 Standoffs for Pi HATs - Black Plated - Pack of 2
Our standoffs are engineered specifically to keep your Pi HAT or pHAT snug and supported on your Pi while also keeping the two boards separated. They're the perfect companion for any Pi HAT/pHAT combo. Contents 2 x 10mm M2.5 F-F standoff 4 x 6mm screw Raspberry Pi and ...
Standoff - Nylon (4-40; 3/4; 10 pack)
These nylon standoffs are ¾" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. The black nylon will give your project a very sessy look. Sold in packs of ten. Check below for matching screws.
Standoffs Plastic - (4-40; 3/4; 10 pack)
Nylon standoffs for mounting PCBs in enclosures or elevating boards off work surfaces. These ¾" (19mm) long standoffs are tapped for 4-40 screws and sold in a pack of 10. Key Features Nylon Construction – Non-conductive, won't short circuit boards 4-40 Thread – Standard tapping for 4-40 screw...
Acrylic UNO Base
A frosted milky-white acrylic base plate for the Arduino UNO and Leonardo. The base mounts underneath the board using nylon standoffs, protecting the underside from contact with work surfaces and giving your setup a clean, professional look. Made from high-quality double-sided frosted acrylic wi...
Standoff - Nylon (4-40; 3/8; 10 pack)
These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. The black nylon will give your project a very sessy look. Sold in packs of 10. Check below for matching screws.
Nylon Standoff - 3/8in, 4-40
·
This nylon standoff is a simple hardware spacer for lifting a PCB off the bench or mounting a board neatly inside an enclosure.It is 3/8" long and tapped for a 4-40 screw, making it handy for projects that use common 4-40 mounting hardware.Standoffs are sold individually, so you can order exactly...
