All Products

SKU: AF-743

Outdoor enthusiasts rejoice! We now have standard 5.5/2.1mm DC power cable sets in a waterproof variety. These cable sets are ideal for projects that must weather the weather: dust, water, rain, snow, tornado (not volcano proof!). They are a little bulkier than normal DC jacks because of the o-ri...

SKU: AF-744

This waterproof polarized 4-wire cable set provides a reliable, weather-resistant connection for outdoor electronics projects. The polarized connectors ensure correct orientation every time, while an O-ring seal and threaded over-screw keep dust and water out. Each cable has four colour-coded co...

SKU: DF-FIT0885 · MPN: FIT0885

This DC power splitter cable lets a single DC 5.5 x 2.1 mm power source feed three compatible devices, making it a handy option for tidy multi-device power setups.It uses a tinned oxygen-free copper wire core for stable transmission and to help suppress external signal interference. The PVC outer...

SKU: DF-FIT0884

This DC 5.5×2.1mm power splitter cable lets you power two DC devices from a single power source. Each cable splits one female DC jack into two male DC plugs, making it easy to share a power adapter between devices. Built with tinned oxygen-free copper wire for stable transmission and minimal sig...

SKU: DF-FIT0886 · MPN: FIT0886

This DC power splitter cable lets you run four DC devices from a single power source. It has one DC 5.5 x 2.1mm female connector splitting out to four DC 5.5 x 2.1mm male connectors, making it handy for tidier low-voltage power distribution.The cable is compatible with DC5.5*2.1 connectors and us...

SKU: DF-FIT0145

A waterproof DC-DC step-down/step-up converter that accepts 8–40V DC input and delivers a stable 12V output at up to 6A (72W). Ideal for powering embedded PCs, single-board computers, and robot electronics from a wide range of battery or power sources. Key Features Wide Input Range – 8–40V DC ...

SKU: DF-FIT0168

A waterproof DC-DC step-down converter that takes 11–35V DC input (compatible with 12V and 24V systems) and outputs a regulated 7.5V at up to 5A (38W). The sealed, shockproof enclosure and 96% efficiency make it well suited for robotics and outdoor applications. Key Features Wide Input Range –...

SKU: DF-FIT0169

A waterproof DC-DC step-down (buck) converter that accepts 16–36V DC input and outputs a stable 9V at up to 5A (45W). The sealed, shockproof enclosure and 96% efficiency make it well suited for robotics, vehicles, and outdoor installations where reliable voltage regulation is needed. Key Feature...

SKU: DF-FIT0172

A waterproof DC-DC step-up converter that takes 8–18V DC input and outputs a stable 24V at up to 10A (240W). The sealed, shockproof enclosure makes it suitable for robotics, outdoor installations, and demanding environments. Key Features 240W Output – 24V at up to 10A continuous Wide Input Ra...

SKU: DF-FIT0784

A DC 5.5×2.1mm female to USB Type-C male power adapter plug, allowing you to power USB-C devices from a DC barrel jack power supply. Useful for powering Raspberry Pi 4/5, LattePanda, and other USB-C-powered boards from existing DC supplies. Also available in a Micro-USB version. Specifications ...

SKU: DF-FIT0170

The 120W DC-DC Converter steps down a 15–40V DC input to a stable 12V output at up to 10A, making it an ideal regulated supply for embedded PCs, robots, and 12V accessories powered from higher-voltage battery systems. Housed in a waterproof and shockproof aluminium case, this converter is well-s...

SKU: DF-KIT0210 · MPN: KIT0210

This compact outdoor solar power kit is made for off-grid monitoring and IoT installations where mains power is not available. It pairs a 10W monocrystalline solar panel with a solar power controller to charge lithium batteries and provide regulated 12V and 5V outputs for devices such as Raspberr...

SKU: SF-CAB-10759

Integrating Ethernet support into your project is a great way to relay data through a local area network and even bounce information out to the internet. Sometimes it’s hard to get power to your Ethernet devices. Wouldn’t it be convenient to use the same cable for power and data? Using these powe...

SKU: LB-PT-LOOP

Contains1 x Cable with 5.2mm ring3 x Screws3 x Nuts

SKU: AF-761

We have some great waterproof and weather-proof items in the adafruit shop, but once you have a project built, you'll want to enclose it. But how to keep an enclosure weather/waterproof while still attaching cables for power, data or sensors? That's where cable glands come in. By installing...

SKU: AF-771

Keep your power source safe and toasty in these waterproof 3xAA battery holders. They're just like classic switched battery holders, but designed for survival! The case has a rubber gasket around the edge of the case (its black and hard to see in the photos but it is there) and attaches togeth...

SKU: AF-390

This versatile LiIon/LiPo battery charger accepts power from three sources: a 6 V solar panel (via 2.1 mm DC jack), USB Mini-B, or a 5 V DC adapter. It features automatic charging current tracking that draws the maximum possible current from a solar panel in any light condition, providing near-MP...

SKU: AF-827

We have some great waterproof and weather-proof items in the adafruit shop, but once you have a project built, you'll want to enclose it. But how to keep an enclosure weather/waterproof while still attaching cables for power, data or sensors? That's where cable glands come in. By installing th...

SKU: DF-FIT0299

This kit includes PHR-2, PHR-3 and PHR-4 housing (20 units each), through-hole type shrouded header (20 units each) and crimp contact (100 units). SPECIFICATIONS Pitch:2.0mm ((0.079")) Current rating:2A AC,DC (AWG #24) Voltage rating:100V AC,DC Temperature range: -25°C to +85°C (including temper...

SKU: AF-5369

This 10W ETFE solar panel from Voltaic Systems delivers a nominal 5V at up to 1,670mA peak, providing reliable power for portable electronics, battery charging, and off-grid projects. It uses 10 high-efficiency monocrystalline SunPower cells rated at over 22% efficiency. The panel is constructed...