All Products

SKU: AF-462

Turn any Arduino into an AVR chip programmer with this shield kit. Designed for burning Arduino bootloaders onto blank ATmega328P chips, it can also be configured as a standalone AVR ISP programmer that works without a computer — program blank chips up to 10× faster with audio feedback from the b...

SKU: AF-5501

A re-programmable USB Type-C Power Delivery (PD) cable that converts any PD-capable USB-C power adapter into a configurable DC barrel jack output. Programme the built-in PD sink negotiation chip to request 5 V, 7 V, 9 V, 10 V, 12 V, 15 V, or 20 V at up to 2 A — replacing the need for multiple wal...

SKU: DF-DFR0116

This is a USB AVR programmer supported by offical Arduino IDE. Once the Arduino has lost its bootloader for some reasons, use this programmer to reburn the bootloader and save the dead Arduino. This programmer works really well for ATmega168 and ATmega328 and should work with all the AVR micros ...

SKU: EC-AP0500STK

AVRISP2.0 STK500 programmer help you download your codes into your controller or bootloader to your Arduino board, it communicates with PC via USB port, and it works with most of PC & notebook computers.Features It can support a wide range of ATMEL AVR microcontroller. It can works with AVR Studi...

SKU: DF-DFR1226-1 · MPN: DFR1226-1

Built for embedded projects that need desktop-class software support, this palm-sized x86 single-board computer combines an Intel Processor N150 with 8GB of LPDDR5 memory and 64GB of onboard eMMC storage. It keeps the classic LattePanda V1 88mm x 70mm footprint and interface layout, making it a p...

SKU: SF-CAB-09215 · MPN: CAB-09215

This handy AVR programming cable combines the common 10-pin and 6-pin ISP programming interfaces in one lead, making it useful when your programmer and target board use different AVR ISP header formats.The cable is about 12 inches long and mates with pins on 1/10in centres, suiting standard 0.1 i...

SKU: DF-TEL0190 · MPN: TEL0190

RainbowLink V2 is a pocket-sized USB Type-C serial debugging workstation that combines four independent communication channels with useful field power outputs. It replaces multiple USB dongles for RS485, RS232 and TTL UART work, making it well suited to field engineering, IoT development and indu...

SKU: LB-LR0214-150A

The TinyISP programmer is suited for any AVR microcontroller and con be used on the LittleBird Ruler.This programmer functions the same as the USBTinyISP from adafruit.Included in the package: TinyISP programer Ribbon Cable

SKU: AF-1465

Stop searching for the AVR ISP pinout every time you program. This simple breakout adapter converts the standard 2×3 AVR ISP box header to two breadboard-friendly 1×3 rows, making it easy to wire up your programmer without crossed wires or guesswork. The adapter plugs neatly into any standard br...

SKU: DF-SER0067 · MPN: SER0067

This high-torque waterproof digital servo delivers up to 35 kg·cm of torque at 7.4V and features a 12-bit magnetic encoder for precise absolute position control across a full 360° range. Built for demanding robotics and automation applications, it combines reinforced steel gears, dual ball bearin...

SKU: DF-FIT0781

A versatile USB-to-serial converter module supporting six conversion modes: USB-TTL, USB-232, USB-485, TTL-232, TTL-485, and 232-485. Switch between modes using onboard DIP switches — no need for multiple adapters. Built around the CP2102 chip with 3.3V/5V compatibility. Includes 500mA fuse prot...

SKU: SF-WRL-22957

The RTL-SDR Blog V3 is a low-cost software-defined radio (SDR) USB dongle bundled with a multipurpose VHF/UHF dipole antenna kit. It receives radio signals across a wide frequency range — from 500 kHz to 1,766 MHz — and processes them in software on your computer, making it an accessible entry po...

SKU: SF-COM-30157 · MPN: COM-30157

The ATMEGA2560-16AUR is a high-performance, low-power 8-bit microcontroller based on the Microchip AVR enhanced RISC architecture. It is the controller IC used at the heart of the Arduino Mega and many other advanced controller boards, making it a strong choice for complex embedded projects that ...

SKU: SF-DEV-19254

TIMI-Click is a unique breadboard compatible display development module designed to provide development boards/modules which have a mikroBUS™ Click socket a simple to interface display solution. TIMI Click is aimed to speed up and reinvent the way electronic testing, development and projects are ...

SKU: SF-PGM-25003 · MPN: PGM-25003

The Espressif Module Prog-1 is a dedicated programmer for flashing ESP32 modules without soldering. It uses spring pins to make a secure, swappable connection to supported modules, making it handy for development, testing or small production runs.To use it, place a compatible ESP32 module onto th...

SKU: SF-ROB-29919 · MPN: ROB-29919

This configurable metal-geared servo can be used as a standard angular servo, a custom-limit angular servo, or a continuous-rotation actuator. It accepts conventional PWM input, so it can drop into many robotics builds while adding useful reconfiguration options when used with the optional REV SR...

SKU: EC-DPO01117E

The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board. In addit...

SKU: SF-DEV-13613

The IOIO-OTG (pronounced "yo-yo-O-T-G") is a development board that lets Java developers add hardware I/O capabilities to Android or PC applications. A PIC24FJ256 microcontroller bridges your app to low-level peripherals including GPIO, PWM, ADC, I²C, SPI, and UART, all controllable through a Jav...

SKU: DF-TEL0087

Add bluetooth 4.0 to your PC, Mac directly with this USB BLE-Link. It uses the USB package which is compact and compatible with v2.1 and earlier, and also supports the latest v4.0/Bluetooth Low Energy. Now you could use this adapter to receive/transmit data. With two USB-BLE Link users can do ...

SKU: AF-1737

A compact wireless QWERTY keyboard with a USB dongle, ideal for pairing with a Raspberry Pi, BeagleBone, or any computer with a USB port. The slim chiclet-style keys provide a comfortable typing experience in a small footprint. The wireless USB dongle is plug-and-play — it shows up as a standard...