All Products
AI Overview
Here are the best matches for a temperature probe, grouped by probe type and typical use.
Waterproof digital contact probes (easy MCU hookup)
- Waterproof DS18B20 Temperature Probe 0.5m with XH2.54mm Connector — 1‑Wire DS18B20, -55 to +125°C, 0.5m cable, waterproof stainless probe ($4.10).
- Waterproof DS18B20 Temperature Probe 1M with XH2.54mm Connector — same 1‑Wire DS18B20 probe with a 1m cable ($4.75).
- Waterproof DS18B20 Sensor Kit — DS18B20 probe bundle for Arduino-style projects (nice if you want the extras in one pack) ($13.80).
- Temperature Sensor - Waterproof (DS18B20) — sealed DS18B20 1‑Wire waterproof probe option ($24.25).
- Temperature Sensor - High Temperature, Waterproof (DS18B20) — waterproof DS18B20 1‑Wire probe variant ($25.60).
Simple analog thermistor probes (common for controllers)
- 5pcs NTC 10K Ohm Thermistor Temperature Sensor Cylinder Probe 1m Wire — pack of 5x NTC 10kΩ metal cylinder probes with 1m leads (good for many thermostats/ADC reads) ($10.20).
High-temperature thermocouple probes (for hot surfaces/ovens)
- Thermocouple Type-K - Stainless Steel — Type‑K thermocouple probe (requires a thermocouple amplifier/interface) ($20.35).
- Thermocouple Type-K Glass Braid Insulated [K] — Type‑K, fiberglass braid, rated to 500°C ($20.80).
- Thermocouple Type-K Glass Braid Insulated Stainless Steel Tip — Type‑K stainless tip probe, high-temp capable ($20.60).
- Gravity: I2C High Temperature Sensor (K-Type, 800℃) — includes K-type probe + MAX31855K interface, I2C, up to 800°C ($43.95).
- SparkFun Thermocouple Breakout - MAX31855K — SPI thermocouple digitizer to use with Type‑K probes ($42.95).
Precision RTD probes (accuracy/stability)
- PT100 Platinum RTD Temperature Sensor — PT100 RTD (100Ω @ 0°C) for accurate measurement (needs an RTD interface circuit) ($30.35).
- Platinum RTD Sensor - PT100 - 3 Wire 1 meter long — 3‑wire PT100, 1m lead (better for lead resistance compensation) ($26.60).
Temp probe + humidity (environment monitoring)
- SHT20 I2C Temperature Humidity Sensor (Waterproof Probe) — I2C, waterproof probe measuring temperature + humidity ($39.25).
High-temp (non-DS18B20) analog option
- Gravity: Analog High Temperature Sensor — analog high-temp sensing when 125°C max isn’t enough for DS18B20 ($24.25).
Collections
Showing 1-20 of 100 products
Elektor 6-Channel Temperature Monitor & Logger Module
·
This partly assembled temperature monitor and logger module is designed for reading multiple PT100 temperature probes and sending the measured values out over a serial port for data logging or further processing.Up to six 3-wire PT100 sensors can be connected, letting you monitor as many as six t...
PT100 Platinum RTD Temperature Sensor
·
This PT100 is a platinum RTD (Resistance Temperature Detector) for accurate temperature sensing. It has a nominal resistance of 100Ω at 0°C, with resistance changing as temperature changes.It is suitable for applications across a broad temperature range, and is commonly used where stable, repeata...
Adafruit TMP119 ±0.03°C I2C Temperature Sensor
·
Built around Texas Instruments' TMP119, this breakout makes it easy to add extremely accurate temperature monitoring to your project over I2C. It is designed for applications where temperature really matters, including thermostats, cold chain asset tracking, and gas or heat metering, and it can a...
MLX90632 FIR Remote Thermal Temperature Sensor
·
This compact breakout uses Melexis' MLX90632 FIR sensor to read the temperature of a target without making contact. It's handy for checking surfaces that are hot, cold, moving, delicate or awkward to reach with a probe, and it can also report its own local on-chip temperature.The fitted MLX90632S...
Gravity BMP581 Barometric Pressure & Temperature Sensor - I2C/UART
·
This compact Gravity module brings Bosch BMP581 pressure and temperature sensing to microcontroller projects that need stable altitude or environmental readings. It is designed for applications such as drone altitude hold, indoor navigation, weather logging and hiking altimeters.The board support...
Gravity BMP585 Barometric Pressure & Temperature Sensor (I2C/UART)
·
Built around the Bosch BMP585 chip, this Gravity module measures barometric pressure and temperature for altitude, weather and environmental sensing projects. Its gel-filled cavity and industrial protective cover help it resist water, moisture and chemical exposure, making it better suited to dem...
Adafruit BMP581 I2C/SPI Temperature & Pressure Sensor
·
This Bosch BMP581 breakout is a precision barometric pressure, temperature and altimeter sensor for environmental sensing, drones, wearables and projects that need to track height above sea level. It offers much finer pressure precision than earlier BMP2xx and BMP3xx generations, making it well s...
BMP580 I2C/SPI Temperature and Pressure Sensor Breakout
·
Bosch’s BMP580 is a precision barometric pressure, temperature and altimeter sensor for projects that need fine height or pressure tracking. It follows on from Bosch’s BMP2xx and BMP3xx sensors and can be used over either I2C or SPI.Use I2C for simple wiring, or SPI when you want to connect multi...
Fermion BMP581 Barometric Pressure & Temperature Sensor
·
This compact Fermion module is built around Bosch Sensortec’s BMP581 high-performance barometric pressure sensor chip. It measures pressure and temperature with high precision, offering ±0.3 hPa typical absolute pressure accuracy for detecting small altitude, floor-level or liquid-level changes.T...
Fermion BMP585 Pressure & Temperature Sensor - I2C/SPI/I3C
·
This compact Fermion breakout brings the Bosch BMP585 MEMS pressure and temperature sensor to a tiny board for projects where space, power use and reliable environmental sensing matter. It measures barometric pressure for altitude and vertical movement applications, with typical absolute pressure...
STCC4 + SHT41 CO2, Temperature & Humidity Sensor
·
This compact breakout combines the STCC4 CO2 sensor with a Sensirion SHT41 temperature and humidity sensor for convenient indoor air monitoring. The STCC4 measures true CO2 using a thermal conductivity method rather than estimating from VOCs, and the onboard SHT41 helps improve the CO2 measuremen...
1-Wire Digital Temperature Sensor for Raspberry Pi - Unassembled (1m)
The Little Bird 1-Wire Digital Temperature Sensor for Raspberry Pi — a plug-and-play solution for environment sensing, data logging, and IoT applications. Simply plug it onto the Raspberry Pi GPIO header — no breadboard, jumper wires, or additional components needed. This is the unassembled vers...
Waterproof DS18B20 Digital Temperature Sensor For Arduino
This is a waterproofed version of the DS18B20 Temperature sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC so we suggest keeping it under 100°C. Because they are digital, you don't get ...
BME680 Breakout - Air Quality, Temperature, Pressure, Humidity Sensor
The state-of-the-art BME680 breakout lets you measure temperature, pressure, humidity, and indoor air quality, and is Raspberry Pi and Arduino-compatible! Use this breakout to monitor every aspect of your indoor environment. Its gas resistance readings will react to changes in volatile organic...
Adafruit SCD-30 - NDIR CO2 Temperature and Humidity Sensor - STEMMA QT / Qwiic
The Adafruit SCD-30 is a true NDIR (Non-Dispersive Infrared) CO2 sensor that directly measures carbon dioxide concentration in ambient air, rather than estimating it from volatile organic compounds. With an integrated SHT31 temperature and humidity sensor, it provides comprehensive environmental ...
Gravity: Arduino DHT11 Temperature Humidity Sensor
This Gravity-compatible DHT11 sensor provides calibrated digital temperature and humidity readings via a single data pin. With an integrated 8-bit microcontroller and factory-calibrated coefficients stored in OTP memory, it delivers reliable measurements with minimal setup. The Gravity 3-pin int...
Adafruit Sensiron SHT31-D Temperature Humidity Sensor Breakout
The Adafruit Sensirion SHT31-D is a high-accuracy temperature and humidity sensor with a true I2C interface and PTFE filter for protection against dust and contaminants. Part of Sensirion's third-generation SHT sensor family, it delivers ±2% relative humidity and ±0.3 °C temperature accuracy for ...
Gravity: Analog High Temperature Sensor
What sensor should you use when you need to measure temperature? Most people will think of a DS18B20 temperature sensor first, but this sensor is only capable of measuring temperatures up to 125C. In order to measure temperatures greater than 100C you will need something with a greater temp...
Adafruit HTU21D-F Temperature Humidity Sensor Breakout Board
The Adafruit HTU21D-F is an accurate I²C digital temperature and humidity sensor breakout board. With typical humidity accuracy of ±2% (optimised for 5–95% RH) and temperature accuracy of ±1°C across -30 to 90°C, it's a reliable and affordable choice for environmental monitoring projects. This b...
Panel Temperature Meter / -30 to +70 °C
Put a temperature meter anywhere with this very handy display. This panel meter displays the temperature of the attached waterproof 1% thermistor in °C. It does require a DC voltage to run, at 4.5-30VDC. It has reverse polarity protection in case you swap the power leads by accident. To use, sim...
