All Products

SKU: AF-181

Standard HD44780 LCDs are useful for creating standalone projects. 16 characters wide, 2 rows White text on blue background Connection port is 0.1" pitch, single row for easy breadboarding and wiring Pins are documented on the back of the LCD to assist in wiring it up Single LED backlight inc...

SKU: AF-1447

Standard HD44780 LCDs are useful for creating standalone projects.  This product is similar to our Standard LCD 16x2 display but comes with the header soldered on! 16 characters wide, 2 rows White text on blue background Connection port is 0.1" pitch, single row for easy breadboarding an...

SKU: AF-1115

The Adafruit Blue & White 16×2 LCD + Keypad Kit is a Raspberry Pi add-on plate that provides a 16×2 character LCD display, 5 navigation buttons, and backlight control — all using just the two I2C pins on the Pi. The I2C bus remains shareable with other sensors and devices. The 4 directional butt...

SKU: AF-772

This new Adafruit shield makes it easy to use a 16x2 Character LCD. We really like the Blue & White 16x2 LCDs we stock in the shop. Unfortunately, these LCDs do require quite a few digital pins, 6 to control the LCD and then another pin to control the backlight for a total of 7 pins. That's al...

SKU: AF-399

This is a fancy upgrade to standard 16x2 LCDs, instead of just having blue and white, or red and black, this LCD has full color RGB characters on a dark/black background! That means you can change the character display colors to anything you want - red, green, blue, pink, white, purple yellow,...

SKU: PI-COM0506

A simple and affordable 16×2 character LCD module for displaying text, readings, and status messages from your microcontroller. With pre-soldered header pins, it's ready to connect straight to an Arduino, Raspberry Pi, or other development board. This HD44780-compatible display features a blue b...

SKU: DF-DFR0063

This is an 16x2 LCD display screen with with I2C interface. It is able to display 16x2 characters on 2 lines, white characters on blue background. Usually, Arduino LCD display projects will run out of pin resourceseasily, especially with Arduino Uno. And it is also very complicated with the wi...

SKU: DF-DFR0555

The Gravity I2C LCD1602 is a 16×2 character LCD display module with a blue backlight and white text. It communicates over I2C, requiring only two data pins instead of the many parallel connections of a traditional LCD1602. The module is compatible with both 3.3V and 5V systems, and the contrast i...

SKU: AF-715

The Adafruit I²C Controlled + Keypad Shield Kit lets you drive a 16×2 character LCD and read 5 navigation buttons using only two I²C pins on your Arduino. This frees up the 9+ digital pins that a standard LCD connection would require, while still allowing other I²C devices to share the bus. The ...

SKU: AF-1109

The Adafruit RGB Positive 16×2 LCD + Keypad Kit is a Pi Plate that combines a 16×2 character LCD with RGB backlight and a 5-button keypad, all controlled over I2C using just two pins. The positive-style display shows dark text on a coloured background for a classic, easy-to-read look. By using a...

SKU: AF-1110

The Adafruit RGB Negative 16×2 LCD + Keypad Kit is a Pi Plate that combines a 16×2 character LCD with RGB backlight and a 5-button keypad, all controlled over I2C using just two pins. The negative-style display shows light text on a coloured background, giving a crisp, high-contrast appearance. ...

SKU: DF-DFR0091

A 128 × 64 pixel graphic LCD module based on the ST7920 controller, featuring a blue backlight with white characters. Supports both parallel (8/4-bit) and SPI (3-wire serial) interfaces, with parallel mode set as the default. To switch to SPI mode, move the R9 resistor to the R10 position. The d...

SKU: DF-FIT0127

Standard 16x2 character LCD display. It has a basic 16 character by 2 line display with a blue background with white characters. You could get a compatible LCD pannel or IIC LCD backpack here. SPECIFICATIONS Supply voltage:5V DOCUMENTS Datasheet SHIPPING LIST 16x2 Character LCD...

SKU: DF-DFR0464

A 16×2 character LCD module with full RGB backlight, communicating over I2C for minimal wiring. With support for 16 million backlight colours, this display adds a vibrant, customisable readout to your Arduino or compatible microcontroller projects using just four wires: VCC, GND, SDA, and SCL. P...

SKU: AF-716

This Arduino shield kit combines a 16×2 RGB character LCD with five navigation buttons, all controlled over I2C using just two pins (Analog 4 and 5). An on-board I2C port expander handles the LCD, RGB backlight, and keypad inputs, leaving your remaining pins free for sensors and other peripherals...

SKU: SF-LCD-16397

The SparkFun 16×2 SerLCD is a serial-enabled LCD that provides a simple, cost-effective way to add an RGB-on-black liquid crystal display to your project. An on-board ATmega328P microcontroller handles all screen control, eliminating the need for a separate backpack board. The display supports t...

SKU: AF-398

A 16 × 2 character LCD with a full RGB backlight, displaying black text on a customisable colour background. Set the backlight to any colour — red, green, blue, purple, teal, white, or anything in between — by controlling three independent LED channels. With excellent daylight readability and vib...

SKU: PL-1219

This white-on-blue 20×4 character LCD adds a clear, easy-to-read display to your electronics projects. With four rows of 20 characters, it provides plenty of space for sensor readings, menus, status messages, and more. The display uses the industry-standard HD44780 parallel interface, making it ...

SKU: AF-714

This new Adafruit shield makes it easy to use a 16x2 Character LCD. We really like the RGB LCDs we stock in the shop both the RGB negative and RGB positive. Unfortunately, these LCDs do require quite a few digital pins, 6 to control the LCD and then another 3 to control the RGB backlight for a...

SKU: DF-DFR0374

The Arduino LCD Keypad Shield V2 includes a 2x16 LCD display and 6 momentary push buttons. Pins 4, 5, 6, 7, 8, 9 and 10 are used to interface with the LCD and Analog Pin 0 is used to read the work status of five pushbuttons. This product ensures consumer's convience especially when comp...