All Products

SKU: SF-DEV-15713

The SparkFun moto:bit is a fully loaded "carrier" board for the micro:bit that, when combined with the micro:bit, provides you with a fully functional robotics platform. The moto:bit offers a simple, beginner-friendly robotics controller capable of operating a basic robotics chassis. Onboard each...

SKU: SF-KIT-16275

The SparkFun micro:bot kit v2.0 combines the SparkFun moto:bit carrier board with a robot chassis to create a flexible, low-cost robotics platform powered by the BBC micro:bit. Build and program simple robots without soldering — just add your own micro:bit and start moving. The moto:bit carrier ...

SKU: SF-TOL-19769 · MPN: TOL-19769

These V-bit cutters are made for engraving intricate patterns and fine detail work, especially when using the V-carve feature in Carbide Create.The pack includes two cutters, giving you a spare on hand for CNC engraving and carving jobs.If you have, or are purchasing, a Nomad, make sure you also ...

SKU: SF-SEN-22397

The SparkFun BMI270 6DoF IMU Breakout is a Qwiic-enabled board featuring the ultra-low-power BMI270 inertial measurement unit from Bosch. It combines a 16-bit tri-axial accelerometer and 16-bit tri-axial gyroscope with intelligent on-chip motion detection features optimised for wearable applicati...

SKU: SF-SEN-27544 · MPN: SEN-27544

When the ADC built into your microcontroller is not precise enough, this Qwiic breakout adds a high-resolution Texas Instruments ADS1219 for measuring very small analogue voltage changes.The board provides four channels of 24-bit analogue input, which can be used as four single-ended inputs or co...

SKU: SF-SEN-19895

The SparkFun 9DoF IMU Breakout combines the high-performance ISM330DHCX 3D accelerometer and gyroscope from STMicroelectronics with the MMC5983MA triple-axis magnetometer from MEMSIC, delivering nine degrees of freedom on a single Qwiic-enabled board. Using the SparkFun Qwiic Connect System, no ...

SKU: SF-SEN-12041

If you need to add user input without using a button, then a capacitive touch interface might be the answer. The AT42QT1010 SparkFun Capacitive Touch Breakout offers a single capacitive touch button with easy-to-use digital I/O pins. The AT42QT1010 is a dedicated, single-button capacitive sense...

SKU: SF-DEV-16129

The SparkFun controller:bit is a fun-filled "carrier" board for the micro:bit that, when combined with the micro:bit, provides you with a fully functional controller system. Designed in a similar form factor to the classic Nintendo controller, the controller:bit is equipped with a four-direction ...

SKU: SF-BOB-31206 · MPN: BOB-31206

Generate a real analogue output from your microcontroller instead of relying on PWM. This MCP4725 breakout is a 12-bit Digital-to-Analogue Converter (DAC) that outputs precise voltage levels over an I2C/Qwiic connection.It is useful for projects that need smoother control signals, such as sound g...

SKU: SF-PRT-17252

The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 80, right angle, PTH pins. Add this part to your board to create a handy way to swap out micro:bits for programming, while still providing reliable conn...

SKU: SF-DEV-15334

A lot of the time you just need to add more analog inputs to solve a problem. It happens. The SparkFun Qwiic 12 Bit ADC can provide four channels of I2C controlled ADC input to your Qwiic enabled project. These channels can be used as single-ended inputs, or in pairs for differential inputs. What...

SKU: SF-COM-12645

Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft, diffuse glow.Features: 600-610nm Orange 1.8-2.2VDC Forward Voltage 20mA Forward Current 40 degree viewing angle 100-160 MCD output Documents: Datasheet LED Tutorial

SKU: SF-PRT-17868 · MPN: PRT-17868

This compact MI:pro case protects a BBC micro:bit while keeping it portable and easy to build into projects. It is designed for both the original micro:bit V1 and the micro:bit V2, with a clear three-layer construction that helps prevent accidental shorts on the pads on the back of the board.The ...

SKU: SF-SEN-17589

This SparkFun Triple-Axis Accelerometer Breakout is a simple Qwiic breakout for the KX134 digital accelerometer from Kionix. The KX134 is a low-power, 16-bit resolution three-axis accelerometer capable of measuring ±8g/16g/32g/64g (user-selectable) and has up to a 10kHz output data rate making i...

SKU: SF-PRT-17253

The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 40, right angle, SMD pins. Add this part to your board to create a handy way to swap out micro:bits for programming, while still providing reliable conn...

SKU: SF-COM-13951

The 2N5191G is an NPN silicon transistor rated for up to 60 V and 4 A, suitable for driving larger loads, switching, and amplification applications in through-hole circuit designs. Specifications Type – NPN silicon transistor Part Number – 2N5191G Maximum Collector-Emitter Voltage (VCEO) – 6...

SKU: SF-PRT-14299

This is a unique two-cell AA battery holder built specifically for the BBC micro:bit. The 6" (~150mm) cable has been terminated with a JST-PH connector. The connector mates the JST socket on the micro:bit perfectly, allowing you to easily make your project battery powered.

SKU: SF-BOB-19626

The SparkFun 8 Channel Level Shifter Breakout features the TXS01018E™ 8-bit, bi-directional logic level translator from Texas Instruments. This board allows you to easily shift logic between devices running at different common microcontroller voltages such as 1.8V, 3.3V and 5V. The TXS0108E ca...

SKU: SF-TOL-14858 · MPN: TOL-14858

This two pack of Carbide 3D V-Bit mills is made for engraving intricate patterns and fine details. With a 90° cutting angle, these cutters are well suited to precision 3D machining and fabrication work.Each cutter is made from solid carbide for long-lasting use, with a 0.5 inch cutting diameter a...

SKU: SF-SEN-13582

The SparkFun Line Follower Array is a long board consisting of eight IR sensors that have been configured to read as digital bits! We have designed the SparkFun Line Follower Arrays to follow a dark line of about ¾ inch width or smaller (spray paint or electrical tape) on a light background. Each...