All Products

SKU: AF-4011

An electronic snow globe kit that combines a Circuit Playground Express with a clear, durable plastic globe. Programme light and sound effects using MakeCode's drag-and-drop block editor — no soldering or coding experience required. Fill the globe with water, glitter, and glycerine for a working ...

SKU: AF-3722

Not merely a snow globe, but a show globe! This custom container is durable, clear and round, with a large flat screw-on top and a press-fit rubber stopper. The stopper makes a nice seal, and is also hollow which means you can put (you guessed it...) electronics inside! This makes it perfect f...

SKU: AF-4504

The Circuit Playground Bluefruit + TFT Gizmo Project Pack bundles everything you need to build wireless, colourful projects with no soldering required. Centred around the Circuit Playground Bluefruit (CPB) with Bluetooth Low Energy, this kit includes a bolt-on colour display, rechargeable battery...

SKU: RS-272-7631

The MakeKit Snow:bit is a propeller-driven sled robot kit designed to work with the BBC micro:bit. Built from laser-cut birch veneer, it features dual motors that push air backwards to propel the sled forward on skis — reaching speeds of up to 40 km/h. A hands-on STEAM project that combines woodw...

SKU: PI-PPMB00130

The Amp:bit is the easiest way to connect a speaker or headphones to your BBC micro:bit. It plugs directly onto the edge connector and provides a 3.5mm headphone jack, solder pads for a speaker, and a volume control wheel — everything you need to add audio to your micro:bit projects. If you have...

SKU: EF-EF03419

The snowflake buzzer is a symbol of Christmas day's snow. The snowflake buzzer is just like snow, comes in this Christmas night and play the Christmas music.This picture is just for a design sketch , the product includes only snowflake. The Christmas tree, the micro:bit and Alligator cables (Blac...

SKU: AF-5431

A pack of five handcrafted, sphere-shaped green LEDs from dLUX-dLITE by Unexpected Labs. Each LED features a semi-diffused 9.9 mm globe that adds a unique decorative touch to PCBs, electronics projects, and art installations. Because they are handmade, every LED is slightly different in appearanc...

SKU: PH-MMP-0594

Following a successful campaign on IndieGoGo SnowPi the GPIO Snowman for Raspberry Pi is now available! Ideal as a Stocking filler this christmas SnowPi the GPIO Snowman is an ideal kit for people new to Raspberry Pi or even the experienced users. Snow Pi comes as a to solder kit and is target...

SKU: DF-DFR0439

These LED string lights are composed of a series of LEDs that have a colorful glow. They can be used as decorations and for other interesting applications. Use them as outdoor string lights, string lights in your bedroom, on your patio or on a globe. There are many applications, what can yo...

SKU: AF-1064

This electret capsule microphone is the same one we use in our great microphone amplifier board. It contains a small vibrating element that will output a few milllivolts peak-to-peak. You will need an op-amp to amplify the signal, some chips are designed with the amplifier built in in which...

SKU: TB-ZD0670

One of the most common lights used in caravans up until quite recently, is the 16W 2D fluoro. The problem with these is not only do they draw a lot of power for the light they produce, but they also blow very frequently, take a long time to "warm up", and they aren’t very pleasant on the ...

SKU: AF-2217

The Adafruit Audio FX Sound Board with 2×2W Amp is a standalone audio trigger with a built-in stereo Class D amplifier — no Arduino or programming required. Simply drag and drop WAV or OGG sound files over USB, wire up buttons and speakers, and you're ready to go. With 16 MB of built-in flash, it...

SKU: AF-5791

The Adafruit STEMMA Piezo Driver Amp uses the PAM8904 switched-capacitor driver to amplify signals for piezo elements at up to 300 kHz. With bridge-tied load (BTL) output and up to 3× voltage multiplication, it can deliver approximately 13 Vpp — much louder than driving a piezo directly from a 3V...

SKU: TB-SL2658

Standard MES globe holder. - Suits SL-2654/6 globes Specifications Plug or Socket Type MES Pack Quantity 1pc Contacts / Pins 2pc ...

SKU: AF-2210

The Adafruit Audio FX Sound Board with 2×2W Amp is a standalone audio trigger with a built-in stereo Class D amplifier — no Arduino or programming required. Simply drag and drop WAV or OGG sound files over USB, wire up buttons and speakers, and you're ready to go. With 2 MB of built-in flash, it ...

SKU: AF-1063

A well-designed electret microphone amplifier breakout built around the Maxim MAX4466 op-amp, specifically engineered for microphone amplification with excellent power supply noise rejection. The board comes fully assembled and tested with a 20–20 kHz electret microphone soldered on. A trimmer p...

SKU: AF-5077

A two-piece silicone mould set for casting your own custom keycaps. Includes four 1U (standard single-key size) and one 1.25U (Tab-key size) cavities, compatible with Cherry MX-style key switches. UV-curable resin is recommended for the best results — it cures quickly and cleanly with a UV lamp,...

SKU: AF-743

Outdoor enthusiasts rejoice! We now have standard 5.5/2.1mm DC power cable sets in a waterproof variety. These cable sets are ideal for projects that must weather the weather: dust, water, rain, snow, tornado (not volcano proof!). They are a little bulkier than normal DC jacks because of the o-ri...

SKU: SF-BOB-12758

The SparkFun Electret Microphone Breakout pairs a small electret microphone capsule with a 60× OPA344 op-amp preamplifier, making it easy to detect sound with a microcontroller's analogue-to-digital converter. Pick up voice, claps, knocks, or ambient noise — the amplified signal is ready to read ...

SKU: AF-1788

The Adafruit Music Maker MP3 Shield with 3W Stereo Amp turns any Arduino into a powerful audio player, recorder, and MIDI synthesiser — with built-in amplification for driving speakers directly. Powered by the VS1053B codec chip, it decodes MP3, AAC, Ogg Vorbis, WMA, FLAC, WAV, and MIDI formats, ...