All Products

SKU: DF-FIT0837 · MPN: FIT0837

Add red decorative lighting to very tight spaces with this ultra-narrow flexible LED strip from DFRobot. At only 2.5mm wide and 1mm thick, it is designed for miniature models, compact electronics, detailed decorative layouts and other builds where standard LED strips are too bulky.The 1-metre str...

SKU: AF-5225

Need to add little dots of colour to a costume, wearable, or structure? The Adafruit NeoPixel Slim LED Dot Strand uses soft plastic cords of plated wire instead of a rigid PCB, making it easy to embed, sew over, or cast into any project. Each tiny NeoPixel dot is spaced every ~50 mm (~2″) along a...

SKU: LB-00211

The E-Textiles Rainbow LED strip contains seven LilyPad-style sewable LEDs in six colours, connected in a snap-apart strip. Break off individual LEDs as needed and sew them into clothing, accessories, or craft projects using conductive thread. Each LED board has its colour printed on the back fo...

SKU: LB-ETEXTILERGB

A sewable tri-colour RGB LED module designed for e-textiles and wearable electronics. By grounding the red, green, or blue channel pins individually or in combination, you can produce any colour. The common-anode design means each channel turns on when its pin is connected to ground. The module ...

SKU: PI-TEK005

Two diamond-shaped, sewable LED boards that are colour-changeable! They can be connected to light up in red, blue, green, or any combination of those colours! The voltage (and hence current) supplied from LIR2032 rechargeable coin cell batteries may damage the Teknikio LED boards, so...

SKU: AF-5849 · MPN: ADA5849

Incredibly tiny 1111-size (1.1mm × 1.1mm) individually addressable RGB NeoPixel LEDs for creating ultra-compact or high-density smart LED designs. These are the same integrated LED technology used in NeoPixel strips and pixels, but at a fraction of the size — 20× smaller than standard 5050 NeoPix...

SKU: AF-1755

Add a little sparkle to your wearable project with Adafruit LED Sequins. These tiny sewable LED boards are the simpler sibling of Flora NeoPixels — they display a single colour with no digital control needed, making them smaller and easier to use for many projects. Simply connect 3–6 VDC to the ...

SKU: SF-DEV-14013

A pack of five red LilyPad LEDs on a snap-apart strip. Each LED has large sew tabs for stitching into fabric with conductive thread, making them ideal for wearable electronics and e-textile projects. The ultra-thin 0.8 mm PCB lies flat against fabric. Key Features 5× Red LEDs – Snap-apart stri...

SKU: LB-EAGLED-LED-R

Made here in Sydney these are our very own EagLED LED - Red in a pack of 10 These are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or use in Paper Circuits. These have large sew tabs so that you can put your conductive thread through seve...

SKU: DF-FIT0356

A 1-metre weatherproof digitally addressable RGB LED strip with 60 WS2812 LEDs. Each LED is individually controllable via a single data line, supporting 256 brightness levels per channel and over 16 million colours. The integrated control circuit and RGB chip are packaged in standard 5050 compone...

SKU: AF-3377

Add a little sparkle to your wearable project with Adafruit LED Sequins. These tiny sewable LED boards are the simpler sibling of Flora NeoPixels — they display a single colour with no digital control needed, making them smaller and easier to use for many projects. Simply connect 3–6 VDC to the ...

SKU: SF-DEV-13735

Blink any color you need! Use the LilyPad RGB LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can produce a broad variety of colors. Each of the colors in the RGB LED are connected to one of the sew tabs on the board labeled R, G, and B.The color channels on ...

SKU: LB-ETEXTILELED-R

This is a simple single unit RED E-Textile LEDEach unit can be sewn into fabric. Various input, output, power and sensor boards are available. They’re even washable (with special care)!These are a thicker PCB than the Sparkfun Lilypad LEDs

SKU: SF-DEV-08467

Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any color. Very bright output. This is a common anode design - to turn on a channel you simply need to ground one of the R/G/B pins to illuminate that chann...

SKU: PR-PIM314

A charming fox-shaped wearable LED badge featuring 12 coloured LEDs and 12 light patterns. The Bearables Fox Badge is sewable, hackable, and wearable — perfect for e-textile projects and creative wearables. Attach the badge using thread (normal or conductive), a safety pin, a small disc magnet, ...

SKU: KI-2726

Ultra-slim sewable LED boards from Kitronik in sakura lilac, designed for e-textile and wearable electronics projects. Each LED board runs from a 3V coin cell battery and illuminates continuously when powered. The double-sided PCBs feature clearly marked + and – connections for reliable conductiv...

SKU: DF-FIT0381

A 10W high-power RGB LED module consisting of nine separate LED dies (red, green, and blue) on a single aluminium substrate. With a combined luminous output of up to 500 lumens, it delivers enough brightness for searchlights, stage lighting effects, and colour-mixing displays. Each colour channe...

SKU: SF-KIT-13927

The LilyPad Sewable Electronics Kit is an introduction to the world of e-textiles and electronic sewing. Through a series of guided projects, you'll learn to sew basic circuits, light up LEDs, control them with buttons and switches, and experiment with a pre-programmed LilyMini circuit that react...

SKU: PR-PIM315

The Bearables Bear LED Badge is a wearable, sewable badge featuring 12 coloured LEDs and 12 built-in light patterns. Press the multi-function button to cycle through patterns, put the badge to sleep, or activate trigger mode for use with Bearables analog sensors connected via conductive thread. ...

SKU: SF-DEV-13903

This is the LilyPad Rainbow LED strip, with seven LilyPad LEDs that are still attached to one another, letting you snap LEDs apart at your leisure to sew into clothing or whatever else you can dream up.The LilyPad Rainbow LED features seven individual LEDs in six unique colors (Red, Blue, Green, ...