All Products

SKU: SF-PRT-17260

This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from silicon making it more flexible than our original Qwiic cable particularly in t...

SKU: AF-4399

This 4-wire cable is 50mm / 1.9" long and fitted with JST SH female 4-pin connectors on both ends. Compared with the chunkier JST PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove. This cable can be used with Qwiic or STEMMA ...

SKU: AF-6034 · MPN: ADA6034

A compact 22-pin flexible flat cable (FPC) with 0.5mm pitch, just 5cm in length. This A-B style cable has matching pin orientation on both ends — pin 1 on one side aligns with pin 1 on the other — ideal for compact builds where the peripheral sits close to the main board. Designed to work with R...

SKU: AF-5931 · MPN: ADA5931

This PCIe Flex Cable gives you a variety of options for connecting and placing your Pimoroni NVMe Base with Raspberry Pi 5. They have a 'one way' design with 16 pads at the Raspberry Pi 5 end and 18 pins at the NVMe Base end to prevent incorrect installation. The designed is set up for PCIe Gen 3...

SKU: SF-CAB-29325 · MPN: CAB-29325

This short mini coax lead links U.FL-equipped RF submodules and other RF devices to carrier boards. At 50mm long, it is designed to be long enough to make the connection while staying tidy inside compact builds.The 50-ohm impedance makes it well suited to almost all SparkFun RF products, includin...

SKU: SF-CAB-24012 · MPN: CAB-24012

This is a 50mm long ESLOV to ESLOV cable. The ESLOV connector has five pins (one more than standard I2C) for automatically configuring the module and handling the sleeping states to boost battery life. Use this cable to connect two ESLOV boards together, or use this along with the SparkFun ESLOV ...

SKU: PI-PIM702 · MPN: PIM702

These cables provide flexible options for connecting and positioning your NVMe Base or NVMe Base Duo.They feature a ‘one-way’ design, with 16 pads on the Raspberry Pi 5 end and 18 pins on the NVMe Base end, ensuring correct installation.Designed for PCIe Gen 3 speeds, they also support Gen 2 reli...

SKU: SF-CAB-28302 · MPN: CAB-28302

A short 22-pin flexible flat cable (FPC) with 0.5mm pitch, just 5cm in length. This A-B style cable has matching pin orientation on both ends – pin 1 on one side aligns with pin 1 on the other – ideal for compact builds where the camera or display sits close to the main board. The short length m...

SKU: AF-1645

A 50 mm replacement flex cable for the Raspberry Pi Camera (both standard and NoIR versions) and Raspberry Pi Display. Swap out the stock 150 mm cable for a shorter length when you need a compact, tidy installation. Simply open the connector on your Raspberry Pi, remove the existing cable, and s...

SKU: SF-KIT-18624

We are quite familiar with seven-segment displays. We see them on our alarm clocks, ovens, and microwaves. By adding more segments to each digit you can display more than just numbers! These fourteen-segment digits allow you to display all sorts of numbers, characters, and symbols. With Qwiic, si...

SKU: SF-PRT-28203 · MPN: PRT-28203

  The SparkFun Qwiic 5V Boost simplifies interfacing 5V I2C devices with the 3.3V Qwiic ecosystem. It takes the 3.3V I2C signals and power from its Qwiic connectors and boosts them to 5V, available on the PTH pins. This is perfect for powering peripherals like RGB LEDs or DC fans commonl...

SKU: SF-KIT-15209 · MPN: KIT-15209

This kit gives you the core hardware needed to start reading 125kHz RFID tags over I2C, without hunting for a separate reader module, antenna or wiring up a complex circuit. The box includes a SparkFun RFID Qwiic Reader, an ID-12LA RFID reader module, two 125kHz RFID cards and a 100mm Qwiic cable...

SKU: DF-DFR0550-V2 · MPN: DFR0550-V2

A 5-inch IPS capacitive touchscreen display with 800×480 resolution, designed for direct connection to Raspberry Pi via the DSI interface. Features optical bonding (full lamination), anti-fingerprint and anti-glare surface treatment, and a high brightness of 550 cd/m² — performing well even in ou...

SKU: TB-NM2860

A 50-metre roll of conductive aluminium foil tape, useful for RF shielding, EMI protection, heat reflection, and a wide range of electronics and maker projects. The acrylic-based adhesive provides strong bonding across a broad temperature range. Specifications Tape Width – 50mm Roll Length – ...

SKU: SF-PRT-16766

A surface-mount 4-pin JST connector in a vertical orientation, designed for the SparkFun Qwiic I2C ecosystem. This 1 mm pitch connector is used on all Qwiic-compatible boards and lets you build your own I2C devices that integrate seamlessly with the Qwiic system. The vertical mount profile is id...

SKU: AF-5462

Connect this to that when an 18-pin FPC connector is needed. This 50mm long cable is made of a flexible PCB. It's A-B style which means that pin one on one side will match with pin one on the other side. How handy! We're stocking this to fit with our EYESPI-compatible boards, but you could, of co...

SKU: AF-6024 · MPN: ADA6024

Add tiny points of addressable colour to costumes, props, wearables and embedded builds without fighting a fragile flexible PCB. This NeoPixel strand uses solid plated wire cords that hold their shape, making it easier to sew over, cast into a structure or route through a costume.The strand has a...

SKU: SF-KIT-15367

The SparkFun Qwiic Kit for Raspberry Pi provides everything you need to start using I2C sensors and displays with your Raspberry Pi via the Qwiic connector system. The kit includes a Qwiic HAT that adds four Qwiic connectors to your Pi's GPIO header, along with three sensor/display breakouts and ...

SKU: SF-CAB-17261

This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and female connectors on the other. The cable insulation is made from silicon making it more flexible than our original Qwiic cable particularly in tight spaces or enclosures. This cabl...

SKU: AF-5603 · MPN: ADA5603

Add a bright numeric display to your project without giving up a pile of microcontroller pins. This assembled Adafruit LED backpack pairs an ultra-bright green 4-digit, 0.56 inch seven-segment display with a driver board that handles the multiplexing for you.The onboard driver chip includes its o...