All Products
Showing 1-20 of 60 products
5-pin (Arduino MKR) to 4-pin JST SH STEMMA QT / Qwiic Cable - 100mm long
This 100mm adapter cable connects STEMMA QT / Qwiic sensors to Arduino MKR boards. It features a 4-pin JST SH (STEMMA QT / Qwiic) connector on one end and a 5-pin JST SH (Arduino MKR I2C) connector on the other, with the wiring crossed over for correct pin mapping between the two systems. Use th...
Flexible Qwiic Cable - 100mm
This is a 100mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from silicon making it more flexible than our original Qwiic cable particularly in tig...
Grove to STEMMA QT / Qwiic / JST SH Cable - 100mm long
A 100 mm adapter cable that bridges the gap between Grove and STEMMA QT / Qwiic ecosystems. One end features a Grove connector, the other a JST SH (STEMMA QT / Qwiic compatible) connector — making it easy to mix and match sensors, breakouts, and host boards across different connector standards. ...
22-Pin 0.5mm Pitch FPC Cable - 100mm
·
This flat flexible cable is a compact 22-pin FPC lead for joining compatible boards and peripherals where space is tight. It has a 0.5mm pitch and a 100mm length, making it suitable for short internal connections.The cable is A-B style, so pin one on one end matches pin one on the other end. Use ...
22-pin 0.5mm pitch FPC Flex Cable for DSI CSI or HSTX - 10cm
·
A 22-pin flexible flat cable (FPC) with 0.5mm pitch, 10cm in length. This A-B style cable has matching pin orientation on both ends — pin 1 on one side aligns with pin 1 on the other — making connections straightforward. Designed to work with Raspberry Pi 5 DSI/CSI connectors and RP2350 boards w...
JST SH 4-Pin Cable - Qwiic Compatible - 100mm Long
This 4-wire cable is a little over 100mm / 4" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove. This cable can be used with Qwiic bo...
JST-GHR-04V to JST-GHR-06V Cable - 100mm
·
Securely link compatible modules with this short adapter cable, fitted with a 4-pin locking JST-GHR connector on one end and a 6-pin locking JST-GHR connector on the other.Both connectors use a 1.25 mm pitch and are suited to hardware that may see movement or vibration, such as sensors and teleme...
Wide Band 4G LTE Internal LoRa Antenna
A compact wide-band internal antenna covering 700–2700 MHz, suitable for 4G LTE, LoRa, BLE, and other RF applications. The FPC radiator element connects via a 100mm coaxial cable with an IPEX (u.FL equivalent) connector, and 3M adhesive backing makes it easy to mount inside enclosures and project...
RFID Qwiic Kit with ID-12LA 125kHz Reader
·
This kit gives you the core hardware needed to start reading 125kHz RFID tags over I2C, without hunting for a separate reader module, antenna or wiring up a complex circuit. The box includes a SparkFun RFID Qwiic Reader, an ID-12LA RFID reader module, two 125kHz RFID cards and a 100mm Qwiic cable...
JST SH 1mm Pitch 3 Pin to Socket Headers Cable - 100mm long
A 100mm adapter cable with a 1mm pitch JST SH 3-pin connector on one end and 0.1" (2.54mm) pitch socket headers on the other. Ideal for connecting to JST SH ports on development boards such as the Raspberry Pi Pico Debug Probe, Pico WH debug port, and other 3-pin JST SH-equipped devices. The soc...
Dual Band Antenna - U.FL (2.4GHz, 5.8GHz)
This adhesive, dual band antenna is perfect for situations when you're trying to get a signal out from a transmitter that you've jammed down into an enclosure. Operating on the 2.4GHz or 5.8GHz band, it works great for WiFi, Bluetooth or ZigBee. Just connect the antenna using the attached U.FL co...
JST PH 3-pin Plug-Plug Cable - 100mm long
A 100 mm (4″) cable fitted with JST-PH 3-pin connectors on both ends. The latching connectors provide a secure, compact connection that won't come apart easily. Colour-coded wiring makes hookup straightforward: red for power, black for ground, and white for signal. Designed to work with STEMMA b...
PCB Antenna - U.FL (2.4GHz)
This small form-factor antenna offers a 2.4GHz frequency range. These antennas offer adhesive backing that simplifies mounting within the device for a FPC or PCB. Just connect the antenna using the attached U.FL connector and then peel and stick! Features: Frequency range: 2400-2500Mhz Polariz...
SparkFun Qwiic Alphanumeric Kit
We are quite familiar with seven-segment displays. We see them on our alarm clocks, ovens, and microwaves. By adding more segments to each digit you can display more than just numbers! These fourteen-segment digits allow you to display all sorts of numbers, characters, and symbols. With Qwiic, si...
smôl 100mm 16-way Flexible Printed Circuit
This is the 100mm 16-way 0.5mm-pitch Flexible Printed Circuit used to interconnect smôl boards end to end. smôl is an ecosystem of miniature processor boards, peripheral boards, power boards and accessories. Designed to be both physically small and to have the smallest possible current draw, smôl...
Flex Cable for Raspberry Pi Camera - 100mm / 4
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) or Raspberry Pi Display for a different size. Works great, just carefully open the connector on the Pi and slip this one in.This cable is 100mm long We have cables in 50mm...
JST GH 1.25mm Pitch 6 Pin Cable - 100mm long
This cable is a little over 100mm / 4" long and fitted with JST-GH compatible 6-pin connectors on either end. We dig the solid and compact nature of these connectors and the latch that keeps the cable from coming apart easily, and the wires are even color coded! These would go great with SEN...
JST SH 9-Pin Cable - 100mm long
This 9-pin cable is just about 100mm / 4" long and fitted with JST-SH female connectors on both ends. Compared with chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel and are easy to insert and remove.We got these especially for our fantastically spooky Adafru...
Flexible Qwiic Cable - Female Jumper (4-pin)
This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and female connectors on the other. The cable insulation is made from silicon making it more flexible than our original Qwiic cable particularly in tight spaces or enclosures. This cabl...
JST-PH 2-pin Jumper Cable - 100mm long
We use 2 pin JST PH connectors for all our battery packs, and if you want to put a board in series, like our LC709203F Stemma QT battery gauge, this cable will be very handy! Both ends have a JST PH 2mm pitch 2-pin plug. Between the two, 100mm of color coded wire - red for power, black for gro...
