All Products
Showing 1-20 of 60 products
Pycom Pysense - Sensor shield for WiPy, SiPy, and LoPy
The Pycom Pysense is a sensor-packed expansion shield that fits all Pycom multi-network modules — including the WiPy, SiPy, and LoPy. It gives you a head start on IoT projects by combining five sensors, a LiPo charger, micro-SD card slot, and USB serial access in one compact board. With ultra-lo...
VL53L5CX 8x8 Time of Flight (ToF) Array Sensor Breakout
A sophisticated distance sensor with 8x8 multizone ranging and a wide field of view - great for robots and advanced motion sensing. This sensor measures distance by beaming low powered infrared lasers at a target (pew pew pew). It has great accuracy and sampling frequency (up to 60 Hz) and a la...
Pycom Pytrack - GPS+motion shield for WiPy, SiPy, and LoPy
The Pycom Pytrack is a GPS and motion sensor shield compatible with Pycom multi-network modules including the WiPy, SiPy, and LoPy. It provides accurate GNSS positioning, a 3-axis accelerometer, USB serial access, LiPo battery charging, and microSD storage — everything needed to get a location-tr...
ESP8266 ESP-01/ESP-01S DHT11 Temperature Humidity WiFi NodeMCU Module for Arduino
A compact sensor shield that pairs with an ESP8266 ESP-01 or ESP-01S module to monitor temperature and humidity over WiFi. The onboard DHT11 sensor captures environmental data, which the ESP8266 processes and uploads to a server — perfect for IoT and smart home projects. Simply program your ESP-...
Gravity: Science Data Acquisition Module Kit for Experiments Education
The Gravity Science Data Acquisition Module Kit is a comprehensive toolkit for conducting digital scientific experiments without programming or electronics knowledge. Built around the DFRobot SCI DAQ module, it includes four sensors covering soil moisture, ambient light, temperature/humidity, and...
Pycom SiPy (Europe/Japan/Korea) - Sigfox+WiFi+Bluetooth MicroPython IoT Platform
The SiPy from Pycom is a multi-network IoT development board combining Sigfox, WiFi, and Bluetooth (classic + BLE) on a single ESP32-powered module. Programmable with MicroPython and the Pymakr IDE, it enables rapid IoT application development with network failover for added resilience. This is ...
ZL9NSQ Wireless 3D Attitude Sensor Module for Posture Detection
·
The ZL9NSQ is a high-performance 3D attitude sensor module that integrates a three-axis accelerometer, a three-axis gyroscope, and a three-axis magnetometer. Featuring a 32-bit ARM Cortex-M4F microprocessor, it utilizes the IMU Motion Engine algorithm along with a 2.4G wireless transceiver and pa...
Gravity: SCI DAQ Module with Screen (I2C)
The Gravity SCI DAQ Module is a multi-functional data acquisition module with a built-in 1.3-inch OLED screen for real-time sensor readings. It supports over 20 common sensor types including temperature, humidity, and barometric pressure — with automatic sensor recognition and a standardised I2C ...
Gravity: WiFi IoT Module for Science Data Acquisition (SCI DAQ)
·
The Gravity: WiFi IoT Module is a companion accessory for the Gravity: Science Data Acquisition (SCI DAQ) Module, enabling wireless sensor data transmission to IoT platforms without any programming required. Simply connect sensors to the SCI DAQ module and start uploading data instantly. Operati...
LG290P Quadband GNSS RTK Breakout (Qwiic)
·
Built around the Quectel LG290P, this compact RTK GNSS breakout is designed for high-precision positioning projects that need quad-band, multi-constellation reception. It follows the same board dimensions, pin layout and connectors as SparkFun’s GPS-RTK-SMA Breakout - ZED-F9P (Qwiic), making it a...
Pycom LoPy - LoRa+WiFi+Bluetooth MicroPython IoT Platform
The Pycom LoPy is a compact, triple-network MicroPython development board combining LoRa, WiFi, and Bluetooth on the Espressif ESP32 chipset. It can function as both a LoRa node (up to 40 km range) and a Nano LoRa Gateway (up to 22 km, 100 nodes), making it a versatile platform for LPWAN IoT depl...
IR Infrared Obstacle Avoidance Sensor Module
This IR sensor can detect obstacles in front of it. When an object is detected the green indicator light on the board will light up. There is a low-level output signal on the OUT port.It has a detection range of 2-30 cm at an angle up to 35 degrees.The detection distance can be changed by u...
Miniware 4-Channel Mini Oscilloscope
This is a “5-track, 4-wave line” digital storage oscilloscope for general-purpose electronic engineering tasks and it is based on the ARM Cortex M3 core. The oscilloscope uses FPGA to manage the external ADC’s control and data cache mode. It provides 4 application partitions for loading and ...
Gravity: GNSS GPS BeiDou Positioning Module with RTC - I2C&UART
·
##Introduction The Gravity GNSS Positioning & Timing Module integrates satellite positioning functionality and a real-time clock (RTC). The module automatically obtains satellite time based on a preset calibration period and accurately calibrates the onboard RTC chip. This calibration effectively...
Gravity: Analog Voltage Divider V2
The Analog Voltage Divider V2 can detect the supply voltage from 0.0245V to 25V. This module is based on resistor divider principle. The voltage detection module allows the input voltage to reduce 5 times. As the Arduino analog input voltage is normally maximum 5V, the input voltage of analog ...
RFID Reader with Cards Kit- 13.56MHz
This RFID kit includes a 13.56M RF reader module, which use the RC522 IC, plus 2 S50 RFID cards to help you learn and add the 13.56 MHz RF transition to your project. The MF RC522 is a highly integrated transmission module for contactless communication at 13.56 MHz, it supports ISO 14443A/MIFARE ...
MicroMod STM32F405 Processor Board
·
This compact MicroMod processor board adds an STM32F405 to a compatible MicroMod Carrier Board, giving your project an ARM® Cortex®-M4 32-bit RISC core in a small, swappable M.2 module.The bevelled edge connector keys into the MicroMod M.2 socket and is secured with the screw supplied with MicroM...
Pycom Expansion Board 2.0
The Pycom Expansion Board 2.0 is a base board for Pycom development modules, providing USB connectivity, LiPo battery charging, a microSD card slot, and easy access to all module pins. It is compatible with the WiPy 2.0, LoPy, SiPy, FiPy, and GPy. Power the board via USB or a LiPo battery connec...
XRP Robotics Platform Controller
·
Build and program an XRP robot with a controller board designed for hands-on robotics learning, from beginner projects through to more advanced tasks. It brings together processing, motion control, sensors, wireless connectivity and expansion so students and makers can focus on building, coding a...
Humidity and Temperature Sensor Module
Measure temperature and relative humidity with this simple, Arduino-compatible sensor module based on the DHT22. With just three connections (GND, power, and data), you can read both temperature and humidity from a single I/O pin on your microcontroller. An Arduino library is available to make in...
