All Products

SKU: SF-PRT-11475

A robust 6-pin GX16 aviation-style connector set including both the panel-mount jack and mating plug. The threaded locking ring screws onto the panel connector, creating a secure connection that won't pull apart — ideal for signal or power wiring in enclosures. Key Features Locking Connection ...

SKU: TB-PS0376

A 4-pin mini DIN panel-mount socket (S-Video / S-VHS type) with nickel-plated copper construction. The socket requires a 10mm panel cutout and uses solder tag termination for secure, permanent connections. Specifications Type – Mini DIN 4-pin (S-Video) socket Pins – 4 Case Material – Nickel-...

SKU: AF-5444

An adapter cable that connects an RP-SMA antenna to RF modules with a w.FL (MHF3 / IPEX3) connector. Essential for adding external antennas to Wi-Fi, Bluetooth, and other RF boards that use the tiny w.FL port — such as the Adafruit Feather ESP32 V2. The cable is just over 20 cm (7.8″) long, with...

SKU: AF-5607

A panel-mount DC barrel jack extension cable that lets you add a clean, professional power input to any enclosure — without cutting custom-shaped holes. The round flange means you only need a standard 1″ (25 mm) drilled hole. Unscrew the plastic nut, insert through the panel, and tighten. Done. ...

SKU: AF-4215

Add a panel-mount Ethernet port to any enclosure without cutting custom shapes. This RJ-45 round panel mount extension cable fits a standard ~30 mm round hole — just drill with a common hole saw, unscrew the plastic nut, insert from behind, and tighten. The plastic lip hides the drill hole for a ...

SKU: AF-6072 · MPN: ADA6072

A snap-in panel mount cable with a USB Type A socket on one end and bare power wires on the other. Perfect for adding a USB-A charging or power port to project enclosures without screws or drilling — just cut a rectangular hole and snap it in. The compact panel mount connector fits into a cutout...

SKU: AF-6075 · MPN: ADA6075

A 5.5/2.1mm DC barrel jack mounted on a flexible, sewable base for wearable tech and fabric-based projects. The jack sits horizontally with red (positive) and black (ground) wires extending from the bottom for easy power connections. The soft rubber base can be sewn by hand or machine directly i...

SKU: AF-4052

This panel mount cable will allow you to enclose a device that has a USB A port, and also converts it to a modern USB C connector at the same time. Perfect for placing your project in a secure box! One end is a USB A plug connector, and other is a USB C socket with special over-molding. What's...

SKU: LB-LS3381-Y

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in yellow, pre-wired with 20 cm red and black leads for easy connection. Normally open — pressing the button closes the contacts. Key Features Pre-Wired – 20 cm red and black leads attached, no soldering required Momentar...

SKU: LB-LS3381-G

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in green, pre-wired with 20 cm red and black leads for easy connection. Normally open — pressing the button closes the contacts. Key Features Pre-Wired – 20 cm red and black leads attached, no soldering required Momentary...

SKU: LB-LS3381-K

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in black, pre-wired with 20 cm red and black leads for easy connection. Normally open — pressing the button closes the contacts. Key Features Pre-Wired – 20 cm red and black leads attached, no soldering required Momentary...

SKU: LB-LS3381-B

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in blue, pre-wired with 20 cm red and black leads for easy connection. Normally open — pressing the button closes the contacts. Key Features Pre-Wired – 20 cm red and black leads attached, no soldering required Momentary ...

SKU: LB-LS3381-R

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in red, pre-wired with 20 cm red and black leads for easy connection. Normally open — pressing the button closes the contacts. Key Features Pre-Wired – 20 cm red and black leads attached, no soldering required Momentary A...

SKU: LB-LS3381-W

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in white, pre-wired with 20 cm red and black leads for easy connection. Normally open — pressing the button closes the contacts. Key Features Pre-Wired – 20 cm red and black leads attached, no soldering required Momentary...

SKU: SF-GPS-00579

A 6-pin vertical JST SH connector in a surface-mount (SMD) package. With a 1.0mm pitch, this is a compact connector ideal for space-constrained PCB designs where a small, reliable connection is needed. This is the JST SH type (1.0mm pitch), which is smaller than the standard JST PH (2.0mm) conne...

SKU: TB-PS0662

DOUBLE BNC SOCKET PANEL MOUNT Specifications Signal Type RF,Composite Video (CVBS) Input Type BNC Input Quantity 1pc Casing Ma...

SKU: AF-5844 · MPN: ADA5844

The RJ-12/RJ-11 Telephone Round Panel Mount Extension Cable provides a simple way to add a panel-mount telephone connection to project enclosures. The round panel-mount design fits a standard drilled hole of approximately 30 mm — no custom oval or square cutouts required. Unscrew the plastic nut...

SKU: PI-CAB0905

Need to expose HDMI, Ethernet, or USB to the outside of your project/enclosure? These lovely little 50cm panel mount extension cables are just the job! Each cable comes with one end in panel mount format so that you can securely fix it to a flat surface and expose a port externally. Great fo...

SKU: AF-5859 · MPN: ADA5859

If you need to add a panel-mount connection for telephone-interfacing projects but don't have the time or ability to cut a custom oval or square hole, this RJ-12 or RJ-11 Telephone Round Panel Mount Plug is the easiest and fastest way to panel-ify your existing phone kit. It's about 30mm in diame...

SKU: TB-PS0658

PANEL SOCKET SINGLE HOLE MOUNT Hole cutout 9.5mm Specifications Plug or Socket Type BNC Case Material Metal Device Socket ...