All Products
Showing 1-16 of 16 products
Prop Shield With Motion Sensors
The Prop Shield is meant for making interactive light and sound effects on small handheld props and wearable costumes. Motion Sensors - Allows motion interactive light & sound. Audio Amplifier - Clear quality audio output to a small speaker. Fast LED Driver - Drive APA102 / Dotstar LEDs fo...
SparkFun Qwiic Shield for Teensy
The SparkFun Qwiic Shield for Teensy adds four Qwiic (I2C) connectors to your Teensy board, providing quick access to the SparkFun Qwiic ecosystem of sensors, actuators, and displays. Sized to fit the Teensy 4.0, Teensy 3.2, and Teensy LC footprints. The shield connects GND, 3.3V, SDA, and SCL f...
Teensy Header Kit
These headers are made to work with the Teensy 3.2 and Teensy LC development boards. Each kit of headers makes your Teensy breadboard compatible and will allow for stacking a Teensy and Teensy-compatible shield board. This kit includes five headers (two 13-pin, one 7-pin, one 3-pin, and one 2x...
SmartMatrix SD Shield v3 - for Teensy 3.2
·
The SmartLED Shield (V4) provides a simple, solder-free way to connect a Teensy 3.2, Teensy 3.5, or Teensy 3.6 to HUB75 RGB LED Matrix Panels. Just plug in your Teensy, connect your panel, and start displaying graphics, patterns, or animated GIFs using the SmartMatrix Library. The shield include...
Teensy to Arduino R3 Shield Adapter
·
This passive adapter lets a Teensy development board connect to the standard Arduino 1.0 (R3) shield footprint, making it easier to reuse existing Arduino shields without a breadboard full of jumper wires.Solder your Teensy board, sold separately, to the marked footprint on the adapter, then plug...
Teensyduino Tutorial Kit
·
Get started with Teensy development using a kit built around the official PJRC Teensyduino Tutorials, parts 1 through 4. It gathers the fundamental electronic components needed for the early lessons, so you can focus on building and learning.The kit is intended as a companion for your Teensy boar...
Teensy 3.1 XBee Adapter
The Teensy 3.1 XBee Adapter connects your Teensy development board with the popular XBee wireless module, giving you a compact solution for projects requiring a reliable, no-frills wireless serial link with decent range. The adapter also doubles as a breakout board for both the Teensy and XBee. ...
Teensy 3.5
The Teensy 3.5 is a compact, powerful USB development board built around a 32-bit ARM Cortex-M4 processor running at 120 MHz with a hardware floating-point unit. With 512 KB of flash, 256 KB of RAM, and 64 digital I/O pins (all 5V tolerant), it packs serious capability into a small form factor. ...
TFT FeatherWing - 2.4 320x240 Touchscreen For All Feathers
·
A 2.4" TFT touchscreen display shield for the Adafruit Feather ecosystem. Featuring a 320×240 pixel display with 16-bit colour, a resistive touchscreen, and a built-in microSD card slot, this FeatherWing adds a full interactive display to any Feather board via SPI. Comes fully assembled with dua...
Ethernet Kit for Teensy 4.1
The Teensy 4.1 is one of the most advanced and reliable development platforms on the market today. One of the biggest asks for the board is the ability to connect the 4.1 to the Internet via Ethernet. Luckily, with all the parts included in this kit (as well as a little bit of soldering), you'...
8MB PSRAM chip for Teensy 4.1
This 8 MB PSRAM (pseudo-static RAM) chip adds extra memory to the Teensy 4.1 microcontroller board. Solder it to the smaller pads on the bottom side of the Teensy 4.1, underneath the SD card socket, between pins 31–32 and 33–34. A second PSRAM chip can be added for a total of 16 MB. In Arduino, ...
SparkFun MicroMod Teensy Processor
The SparkFun MicroMod Teensy Processor leverages the awesome computing power of the NXP iMXRT1062 chip and pairs it with the M.2 MicroMod connector to allow you to plug it into your choice of compatible MicroMod Carrier Board. With the M.2 MicroMod connector, connecting your Teensy Processor i...
SparkFun MicroMod Teensy Processor with Copy Protection
The SparkFun MicroMod Teensy Processor with Copy Protection leverages the awesome computing power of the NXP iMXRT1062 chip and pairs it with the M.2 MicroMod connector to allow you to plug it into your choice of compatible MicroMod Carrier Board. This "copy protection" variant comes with additio...
3.2 inch 320x240 Colour TFT Touchscreen - ILI9341
·
Add a colour touchscreen to your Teensy project with this 3.2 inch TFT display. It provides 320x240 resolution for higher-resolution graphics and uses the ILI9341 display controller.The supplier recommends this display for use with Teensy 3.2 through to Teensy 4.1. It suits projects that need a c...
2.8 inch 320x240 Colour Touchscreen - ILI9341
·
This colour TFT touchscreen is a compact display module for adding high-resolution graphics to compatible maker projects. It provides a 320x240 pixel display area in a 2.8 inch format, using the ILI9341 controller.The display is recommended for use with Teensy 3.2 through to Teensy 4.1, making it...
Teensy 4.0
The Teensy 4.0 is a high-performance microcontroller development board powered by the NXP iMXRT1062 ARM Cortex-M7 processor running at 600 MHz. Despite its compact 35.6 × 17.8 mm (1.4 × 0.7") form factor — the same size as the Teensy 3.2 — it delivers exceptional processing power with a dual-issu...
