All Products

SKU: AF-3420 · MPN: 3420

The PaPiRus Screen HAT from Pi Supply is an ePaper / eInk screen HAT designed for the Raspberry Pi. Think of it as the older sibling of the PaPiRus Zero.ePaper / eInk is a display technology that mimics the appearance of ink on normal paper. Unlike conventional displays, ePaper reflects light – j...

SKU: PR-PIM191

Mote is the most stylish way to light your home (or ship)! Ideal for under-shelf or under-cabinet lighting, or even lighting the way to the emergency exits on your super-yacht (you have one right?) Mote consists of a USB controller, with four channels, that connects via a U...

SKU: PR-PIM295

Mote is the most stylish way to light your home (or ship)! Ideal for under-shelf or under-cabinet lighting, or even lighting the way to the emergency exits on your super-yacht (you have one right?) Mote consists of a USB controller, with four channels, that connects via a U...

SKU: PR-PIM294

Mote is the most stylish way to light your home (or ship)! Ideal for under-shelf or under-cabinet lighting, or even lighting the way to the emergency exits on your super-yacht (you have one right?) Mote consists of a USB controller, with four channels, that connects via a U...

SKU: PR-PIM214

The Automation pHAT is a compact home monitoring and automation controller for Raspberry Pi in the smaller pHAT form factor. With a relay, three analogue channels, buffered inputs, and sinking outputs — all 24V tolerant — it packs serious control capability into a minimal footprint. Uses the sam...

SKU: PR-PIM168

What's going to protect your beloved Raspberry Pi from an onslaught of rainbow-coloured fusion? That's right, it's Unicorn pHAT.Sporting a matrix of 32 (8 x 4) RGB LEDs and powered directly from the Pi, this is the most compact pocket aurora available.Unicorn pHAT provides a wash of controll...

SKU: PR-PIM221

The Automation pHAT is a compact home monitoring and automation controller for Raspberry Pi. With a relay, analog channels, powered outputs, and buffered inputs — all 24V tolerant — you can connect a wide range of sensors and actuators to your Pi in one neat package. It uses the same Python libr...

SKU: PR-PIM202

What's going to protect your beloved Raspberry Pi from an onslaught of rainbow-coloured fusion? That's right, it's Unicorn pHAT.Sporting a matrix of 32 (8 x 4) RGB LEDs and powered directly from the Pi, this is the most compact pocket aurora available.Unicorn pHAT provides a wash of controll...

SKU: AF-3346 · MPN: 3346

The Adafruit I2S 3W Stereo Speaker Bonnet adds high-quality digital audio output to any Raspberry Pi with a 2×20 GPIO header. Using the I2S digital sound standard, audio data goes directly to the onboard Class D amplifier — delivering crisp, static-free stereo sound without relying on the Pi's he...

SKU: WS-22383

The Zero 2W to 3B Adapter is the perfect alternative solution for your Raspberry Pi 3 Model B/B+! This adapter features pogo pin connection, allowing it to easily attach to your Pi 3B/B+ and a headphone jack that is extended from USB. With 4-channel USB ports, compatible with USB 2.0/1.1 tran...

SKU: DF-DFR0604

The IO Expansion HAT adds digital, analogue, I2C, PWM, UART, and SPI ports to the Raspberry Pi Zero and Zero W. An on-board STM32F030 MCU provides 8-channel 12-bit ADC and PWM output, communicating with the Raspberry Pi via I2C for convenient analogue input reading and servo control. Digital por...

SKU: PI-MIME-003

The MeArm Pi is an easy-to-build robot arm kit that's designed to get children (and adults!) learning about technology, engineering and programming. It's been expressly designed to be easy to build (age 11+) and use. At its heart is the Raspberry Pi, a low cost computer that has been developed...

SKU: ET-2444596

A 5 V 2 A micro-USB power supply with a fixed Australian plug, designed specifically for the Raspberry Pi. It features short-circuit and over-current protection, meets CEC Stage 2 efficiency requirements, and is safety approved for Australian use. Compatible with Raspberry Pi 3 Model B/B+, Pi 2,...

SKU: AF-4280 · MPN: 4280

The Adafruit DC & Stepper Motor Bonnet drives up to 4 DC motors or 2 stepper motors from your Raspberry Pi, with full PWM speed control. It uses a dedicated PWM driver chip over I2C, so only two pins (SDA/SCL) are needed — leaving the rest free for other I2C devices or HATs. The TB6612 MOSFET mo...

SKU: KI-5038

The Kitronik Air Quality Control HAT for Raspberry Pi lets you monitor, log, and react to environmental data using the BME688 sensor. It measures temperature, pressure, humidity, air quality index, and eCO2, with an on-board OLED display and ZIP LEDs for visual feedback. An RP2040 co-processor ha...

SKU: RP-SC0626 · MPN: SC0626

The official 5V 2.5A power supply provides reliable power for your Raspberry Pi 3 or Raspberry Pi Zero. With an Australian plug and 1.5m Micro-USB cable, it delivers consistent, stable power for reliable operation. Key Features 5V @ 2.5A Output – 12.5W for stable Pi operation Australian Plug ...

SKU: AF-6358 · MPN: ADA6358

Build large, colourful HUB75 RGB LED matrix displays from a Raspberry Pi without the usual jumper-wire tangle. This Adafruit Bonnet plugs onto the 40-pin GPIO header and drives three parallel matrix strings using the active3 pinout, so it can handle roughly three times as many panels or pixels as...

SKU: AF-3211 · MPN: 3211

The Adafruit RGB Matrix Bonnet makes it easy to drive HUB75-type RGB LED matrices directly from your Raspberry Pi. Simply plug the bonnet onto any Pi with a 40-pin GPIO header, connect your matrix via the IDC cable, attach a 5 V power supply, and run the provided Python code to create colourful s...

SKU: PR-PIM183

Ideal for a mini CCTV system, this set of horizontal and vertical motion servos will give you Pi camera movement with a minimum of fuss. Pan-Tilt HAT lets you mount and control one of our pan-tilt modules right on top of your Raspberry Pi. The HAT and its on-board microcontroller let you in...

SKU: PR-PIM213

The Pimoroni Automation HAT is a versatile home automation and monitoring controller for the Raspberry Pi. It provides relays, analogue inputs, buffered digital inputs, and powered outputs — all 24 V tolerant — with indicator LEDs on every channel for at-a-glance status monitoring. Connects to t...