All Products

SKU: DF-DFR0611

The Particle Argon is a powerful Wi-Fi enabled development board that combines mesh networking and Wi-Fi over the 2.4 GHz band. It can operate as a standalone Wi-Fi endpoint or as a Wi-Fi gateway for a Particle Mesh network. Built around the Nordic nRF52840 processor, the Argon delivers excellen...

SKU: SF-WRL-21604 · MPN: WRL-21604

The BMD-34 series is a compact, surface-mount multiprotocol RF module for low-power embedded designs needing Bluetooth 5, Thread or Zigbee connectivity at 2.4 GHz. It is based on the Nordic nRF52840 and combines an Arm Cortex-M4 with FPU, integrated radio and hardware cryptographic engine in a re...

SKU: AF-5627

A curated electronics kit built around the Adafruit CLUE board and PyLeap — Adafruit's app for wirelessly transferring code and assets from the Learn system directly to your device. No complicated setup or USB cable needed for programming once you're connected via Bluetooth. The CLUE board packs...

SKU: AF-4004

Woohoo, it's time for a Particle Mesh party! So why not cater for connectivity with the Particle Mesh Wi-Fi Bundle, a veritable smörgåsbord (yum!) to begin building mesh networking for your IoT project. Particle Mesh means you can create local networks that collect data, share messages, and co...

SKU: SF-DEV-21251

The Arduino Nano BLE Sense Rev2 packs the nRF52840 processor (32-bit ARM Cortex-M4 at 64 MHz) into the compact Nano form factor, with 1MB flash and 256KB SRAM. It includes Bluetooth 5.0, an impressive array of onboard sensors, and support for TinyML — enabling edge AI and machine learning applica...

SKU: SF-GPS-18380 · MPN: GPS-18380

This field-ready kit is made for centimetre-level global positioning measurements using GNSS RTK. It centres on the RTK Express, a Bluetooth® enabled multi-band GNSS receiver based on the Espressif ESP32 and u-blox ZED-F9P.The kit is supplied in a carrying case and includes the RTK Express GNSS R...

SKU: EC-CIL12901M-1 · MPN: CIL12901M-1

ThinkNode M1 — Off-Grid Meshtastic Communication Device The Elecrow ThinkNode M1 is a compact, fully integrated LoRa transceiver designed for off-grid mesh networking. Pre-loaded with Meshtastic firmware, it enables secure, decentralised communication without any internet or cellular infrast...

SKU: AF-764 · MPN: ADA764

Circuit Playground Bluefruit is a round, beginner-friendly electronics and programming board with Bluetooth® Low Energy built in. It builds on the Circuit Playground Express concept with a more powerful nRF52840 microcontroller, making it suitable for wireless projects, wearables, sensors, intera...

SKU: EC-ARS01119B

ESP-WROOM-32 is a powerful, generic Wi-Fi+BT+BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding. The development board breaks out all the module’s pins to 0....

SKU: AF-4504

The Circuit Playground Bluefruit + TFT Gizmo Project Pack bundles everything you need to build wireless, colourful projects with no soldering required. Centred around the Circuit Playground Bluefruit (CPB) with Bluetooth Low Energy, this kit includes a bolt-on colour display, rechargeable battery...

SKU: AF-4481

The Adafruit ItsyBitsy nRF52840 Express brings Bluetooth Low Energy connectivity to the tiny ItsyBitsy form factor. Powered by the Nordic nRF52840 Cortex M4 at 64 MHz with 1 MB Flash, 256 KB RAM, and 2 MB QSPI Flash, it can act as both a BLE central and peripheral device — perfect for compact wir...

SKU: SF-WRL-21605 · MPN: WRL-21605

Raytac’s MDBT50Q-1MV2 is a compact Bluetooth Low Energy module built around Nordic’s nRF52840 SoC. It is designed for connected products that need Bluetooth 5.x capability alongside 2.4 GHz radio options such as IEEE 802.15.4 for Thread and Zigbee, proprietary 2.4 GHz RF and ANT+.The module bring...

SKU: RB-REDBEARDUO

The RedBear Duo is a thumb-sized IoT development board with built-in Wi-Fi, Bluetooth 4.1 (dual mode), and Particle cloud connectivity. Everything you need to prototype connected devices is on board — just add your idea. Powered by an STM32F205 ARM Cortex-M3 at 120 MHz with Broadcom BCM43438 wir...

SKU: AF-4062

The Feather nRF52840 Express upgrades the nRF52 Bluefruit with the Nordic nRF52840 — featuring 1 MB flash, 256 KB SRAM, native USB, and Bluetooth Low Energy in a single chip. Native USB means no separate serial converter is needed; the chip handles CDC serial, and can also act as a HID keyboard, ...

SKU: SF-DEV-21252

The Arduino Nano 33 BLE Sense Rev2 packs a powerful nRF52840 processor, Bluetooth 5.0, and an impressive array of on-board sensors into the compact Nano form factor. With a 9-axis IMU, microphone, gesture/light/proximity sensor, barometric pressure, temperature, and humidity sensors built in, it'...

SKU: AF-5255

The Adafruit LED Glasses Starter Kit includes everything you need to build a complete pair of programmable LED glasses. Pair the 116-LED front panel with the Bluetooth-enabled nRF52840 driver board, snap them onto the included fashion frames, and you're ready to create dazzling wearable light dis...

SKU: AF-4516

The Feather nRF52840 Sense takes the popular Feather nRF52840 Express and adds a suite of on-board environmental and motion sensors. It features Bluetooth Low Energy, native USB, CircuitPython and Arduino support, plus sensors for acceleration, gyroscope, magnetometer, proximity, light, colour, g...

SKU: SF-WRL-16984

Featuring the nRF52840 SoC from Nordic Semiconductor, the SparkFun MicroMod nRF52840 Processor offers a powerful combination of ARM Cortex-M4 CPU and 2.4 GHz Bluetooth transceiver in the MicroMod form-factor with the M.2 MicroMod connector to allow you to plug in a compatible MicroMod Carrier Boa...

SKU: AF-4078

The MDBT50Q-1M is a compact Bluetooth Low Energy module based on the Nordic nRF52840 Cortex-M4 processor. It integrates the BLE radio, native USB support, and a chip antenna into a small, pre-certified package — ready to drop into your custom PCB design. With generous flash and SRAM, plus a wide...

SKU: EC-CCF32323S

The ESP32S is a WiFi and Bluetooth combo module built around the Espressif ESP32 dual-core processor. It supports 802.11 b/g/n WiFi with speeds up to 150 Mbps and Bluetooth v4.2 (both Classic and BLE), making it a versatile foundation for IoT, wearable devices, and wireless projects. With dual X...