All Products

SKU: SF-ROB-28633 · MPN: ROB-28633

A pair of compact N20 gearmotors with built-in encoders, ideal for small-scale robotics projects. These popular motors pack power and precision into a tiny 12×10mm gearbox profile, making them perfect for differential drive robots, mini rovers, and space-constrained builds. Each motor includes a...

SKU: DF-DRI0035

INTRODUCTION This is a stepper motor driver introduced by DFRobot for those projects require powerful stepper motors, such as a pair of automatic curtains, an XY Plotter. This shield allows Arduino drive stepper motors (up to 2A per motor coil, 40V max). This stepper mo...

SKU: SF-ROB-16328

The SparkFun Auto pHAT is an all-in-one robotics add-on for the Raspberry Pi. It drives up to two DC motors (with optional encoder support) and four servo motors, all controlled over I2C — leaving your Pi's GPIO pins free for other uses. A Qwiic connector is included for easy expansion. The boar...

SKU: AF-4280

The Adafruit DC & Stepper Motor Bonnet drives up to 4 DC motors or 2 stepper motors from your Raspberry Pi, with full PWM speed control. It uses a dedicated PWM driver chip over I2C, so only two pins (SDA/SCL) are needed — leaving the rest free for other I2C devices or HATs. The TB6612 MOSFET mo...

SKU: WS-22311

HRB8825 Stepper Motor HAT For Raspberry Pi, Drives Two Stepper Motors, Up To 1/32 Microstepping Stepper Motor HAT (B) Alternative Solution Of Stepper Motor HAT, Drives Two Stepper Motors, Up To 1/32 Microstepping For 3D Printer, Sculpturing machine, Mechanical arm... Features At A ...

SKU: AF-5857 · MPN: ADA5857

These durable (but affordable!) gearbox motors (also known as 'TT' motors) are an easy, low-cost way to get your projects moving. This is a TT DC Bi-Metal Gearbox Motor with a gear ratio of 1:90, about double the 'standard' 1:48 ratio. That gives them higher torque but slower rotational speed. Si...

SKU: DF-FIT0796

A pack of four coreless micro motors sized 8.5×20mm, designed for DIY drone builds and lightweight RC projects. These high-speed motors deliver 46,000 RPM from a compact form factor, making them well-suited for quadcopter and multirotor applications. Each motor runs on 3.7V (single LiPo cell) an...

SKU: AF-3801

These durable (but affordable!) gearbox motors (also known as 'TT' motors) are an easy, low-cost way to get your projects moving. This is a TT DC Bi-Metal Gearbox Motor with a gear ratio of 1:90 about double of the 'standard' 1:48 ratio. That gives them higher torque but slower ...

SKU: AF-3243

A Feather board without ambition is a Feather board without FeatherWings! This is the Fully assembled (with headers) DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors). Using our Feather Stacking Headers or Fea...

SKU: AF-3802

These durable (but affordable!) gearbox motors (also known as 'TT' motors) are an easy, low-cost way to get your projects moving. This is a TT DC All-Metal Gearbox Motor with a gear ratio of 1:90 about double of the 'standard' 1:48 ratio. That gives them higher torque but slower...

SKU: PL-602

The Solarbotics GMB28 is a precision laser-cut steel mounting bracket designed for the Solarbotics GM2 and GM8 gear motors. It provides a sturdy, versatile mounting solution for attaching these motors to robot chassis, frames, and custom builds. Also compatible with BCM 60:1 and 120:1 gear motors...

SKU: EC-ARS27361T

This motor shield uses dual TB6612 MOSFET drivers and a PCA9685PW I2C PWM controller to drive up to 4 DC motors or 2 stepper motors from an Arduino or compatible board. All motor control and speed management is handled via the I2C bus, freeing up digital pins for other uses. The stackable design...

SKU: SF-ROB-10507

The Quadstepper motor driver board allows you to control up to 4 bipolar stepper motors simultaneously using logic level IO pins. Each motor driver has an output drive capacity of 35V and 1Amps. The board is capable of driving motors in full, half, quarter, eight, and sixteenth-step modes. The lo...

SKU: AF-1438

The Adafruit Motor/Stepper/Servo Shield v2.3 is the upgraded successor to the original Motor Shield, delivering higher current, lower voltage drop, and a fully I2C-based design that frees up your Arduino's PWM pins. Drive up to 4 DC motors or 2 stepper motors plus 2 hobby servos from a single sta...

SKU: AF-2927

A Feather board without ambition is a Feather board without FeatherWings! This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors). Using our Feather Stacking Headers or Feather Fem...

SKU: SF-ROB-24053 · MPN: ROB-24053

These DG01D-E hobby motors come as a matched pair, each with a built-in hall effect speed encoder and a 1:48 plastic gearbox. The hall sensor detects the magnetic plate's polarity — south pole outputs high, north pole outputs low — giving you precise speed and position feedback for closed-loop mo...

SKU: DF-FIT0791

A pack of four coreless micro motors measuring 6 × 12 mm, reaching 50,000 RPM at 3.7V. The slightly longer body compared to the 6 × 10 mm variant provides additional torque, making these motors a good balance of power and size for DIY micro drones and small RC projects. Key Features 50,000 RPM...

SKU: SF-ROB-09571

The SparkFun Serial Controlled Motor Driver allows you to control up to two DC motors using a serial command interface. The serial interface is easy to use and it lets the user select an individual motor, the direction, and the desired speed constant (up to 10 different speed from stop to full sp...

SKU: DF-FIT0795

A pack of four coreless micro motors measuring 8 × 16 mm, reaching 50,000 RPM at 3.7V. With the widest diameter and highest current draw (170 mA) in the coreless micro motor range, these deliver the most torque — ideal for mini drones carrying camera payloads or heavier RC builds that need maximu...

SKU: DF-FIT0790

A pack of four coreless micro motors measuring 6 × 10 mm, capable of reaching 55,000 RPM at 3.7V. Slightly larger than the 4 × 12 mm variant, these motors offer a wider shaft (0.8 mm) for improved propeller compatibility, making them well suited for DIY micro drones and small RC aircraft. Key Fe...