All Products
Showing 1-20 of 60 products
2.5mm Pitch 2-pin Cable Matching Pair - JST XH compatible
A matching pair of 2-pin JST XH-compatible cables — one with an inline plug and one with an inline socket — for easy connect-and-disconnect wiring. The 2.5mm pitch connectors friction-lock together for a secure, reliable connection that's easy to separate when needed. Each cable is 20cm long wit...
1.25mm Pitch 2-pin Cable 20cm long 1:1 Cable
This 1.25 mm pitch 2-pin cable is a compact, Molex PicoBlade-compatible connector cable for projects where standard 0.1″ headers are too bulky. At 20 cm long, it provides a convenient connection length for internal wiring without excess slack. The friction-lock connectors provide a secure, click...
1.25mm Pitch 2-pin Cable Matching Pair - 40cm long - Molex PicoBlade Compatible
This matching pair of 1.25 mm pitch 2-pin cables includes an inline socket and plug connector, providing a complete Molex PicoBlade-compatible connection set. At 40 cm long, these cables offer plenty of reach for internal wiring and panel-mount applications. The friction-lock connectors provide ...
2-Pin Female JST XH-Style Cable (15cm)
This 15cm (6") cable features a 2-pin female JST XH-style connector with 2.5mm pitch. The two 26AWG conductors (red and black) are twisted together to reduce electrical noise, with unterminated ends that can be cut to length for your application. The 2.5mm pitch is close enough to 0.1" (2.54mm) ...
2-pin JST SM Plug + Receptacle Cable Set
This matching cable set includes one 2-pin JST SM plug and one 2-pin JST SM receptacle, each with 16cm leads. The latching connectors provide a solid, compact connection that won't come apart easily, and the polarised design prevents backwards insertion. These cables are compatible with EL wire ...
Lithium Ion Cylindrical Battery - 3.7v 2200mAh
A 3.7V 2,200 mAh lithium-ion cylindrical battery with built-in protection circuitry for over-voltage, under-voltage, and over-current protection. Slim enough to fit into many project enclosures and includes a JST 2-pin cable with a genuine JST connector for smooth, snag-free connections. The bat...
2.0mm Pitch 6-pin Cable Matching Pair - JST PH Compatible
A matching pair of 6-pin JST PH compatible cables with inline plug and socket connectors. Each cable is 20 cm long with stranded 26 AWG wires, providing a reliable and compact connection that can carry a couple of amps of current. The friction-lock connectors make it easy to connect and disconne...
2.0mm Pitch 5-pin Cable Matching Pair - JST PH Compatible
A matching pair of 5-pin JST PH compatible cables with inline plug and socket connectors. Each cable is 20 cm long with stranded 26 AWG wires, providing a reliable and compact connection that can carry a couple of amps of current. The friction-lock connectors make it easy to connect and disconne...
JST SH Compatible 1mm Pitch 3-pin Plug-Plug Cable
·
This JST SH compatible cable features 1 mm pitch 3-pin connectors on both ends, making it ideal for chaining boards together or connecting to debug ports. It's perfect for use with NeoPixel JST breakout boards, UPDI programmers, or any board with a JST SH 3-pin connector for simple digital or ana...
4Ω 6W Speaker
This compact enclosed speaker delivers clear audio output at up to 6W with a 4Ω impedance, suitable for a wide range of DIY audio and display projects. It comes with a JST PH 2-pin input cable for easy connection to amplifier boards and audio-capable development boards. Key Features Enclosed D...
Mono Enclosed Speaker - 1W 8 Ohm
This compact enclosed mono speaker delivers clear audio at up to 1 W with 8 Ω impedance. The sealed enclosure provides better volume and sound quality compared to bare speaker drivers of a similar size, making it a practical choice for embedded audio projects, displays, and interactive installati...
10 x JST-PH 2-Pin SMT Right Angle Connector Black
A 10-pack of JST-PH 2-pin SMT right-angle connectors. This is the standard connector used on single-cell LiPo and Li-Ion batteries, making it essential for any battery-powered project. The right-angle orientation and surface-mount pins keep wiring neat and low-profile. Compatible with JST-PH 2-p...
Thin Speaker - 4 Ohm, 2.5W, 28mm
A compact, thin speaker ideal for projects where space is tight. At just 28 mm in diameter and approximately 4 mm thick, it fits into enclosures and wearables where standard speakers won't. The pre-wired 180 mm cable terminates in a 2-pin JST connector for easy hookup. Key Features 28mm Diamet...
6V Air Valve with 2-pin JST PH Connector - FA0520E
The 6V Air Valve (FA0520E) is a 3-port solenoid valve for pneumatic systems, functioning similarly to an electrical relay. It features a common port (COM), a normally open port, and a normally closed port, allowing you to switch air flow direction by powering the valve on or off. The valve is ra...
JST 2-pin Extension Cable with On/Off Switch - JST PH2
By popular request - we now have a way you can turn on-and-off Lithium Polymer batteries without unplugging them. This PH2 Female/Male JST 2-pin Extension Cable comes with an in-line Switch - click once to turn on, click again to turn off. It's super handy especially in tandem with o...
JST Right-Angle Connector - Through-Hole 2-Pin
A 2-pin right-angle JST PH series connector for through-hole PCB mounting. With a 2 mm pin pitch, this is the standard connector used on most single-cell LiPo batteries, making it ideal for battery-powered projects and charging circuits. Key Features JST PH Series – Industry-standard 2 mm pitc...
2.0mm Pitch 4-pin Cable Matching Pair - JST PH Compatible
A matching pair of 4-pin JST PH compatible cables with inline plug and socket connectors. Each cable is 20 cm long with stranded 26 AWG wires, providing a reliable and compact connection that can carry a couple of amps of current. The friction-lock connectors make it easy to connect and disconne...
JST-PH Battery Extension Cable - 500mm
A 500 mm extension cable with a JST-PH 2-pin socket on one end and a matching plug on the other. The colour-coded wires make it easy to verify correct polarity. Compatible with JST-PH terminated battery packs including LiPo, Li-Ion, and AAA battery holders. Key Features JST-PH 2-Pin Connectors...
Lithium Ion Polymer Battery with Short Cable - 3.7V 350mAh
A compact 3.7 V 350 mAh lithium-ion polymer (LiPo) battery with a short cable and genuine 2-pin JST-PH connector. The slim, lightweight form factor makes it ideal for wearables, IoT devices, and portable electronics projects. The battery includes built-in protection circuitry that guards against...
Lithium Ion Polymer Battery with Short Cable - 3.7V 420mAh
A 3.7 V lithium-ion polymer (LiPo) battery with 420 mAh capacity (approximately 1.55 Wh). It features a short cable with a genuine 2-pin JST-PH connector that clicks smoothly into matching JST jacks without snagging. The battery includes built-in protection circuitry that guards against overchar...
