All Products

SKU: AF-284

Note: These use genuine FTDI chips, either we purchase them or they are manufactured to our specifications with the requirement of genuine FTDI chips 10/22/14 - read more. Long gone are the days of parallel ports and serial ports. Now the USB port reigns supreme! But USB is hard, and you just wan...

SKU: AF-2479

The Adafruit Bluefruit LE UART Friend adds Bluetooth Low Energy connectivity to any microcontroller or computer with a hardware or software serial port. With hardware flow control built in, you won't lose data during transmission. Connect via UART TX/RX pins, or use a standard FTDI cable for debu...

SKU: SF-DEV-27874 · MPN: DEV-27874

The Alchitry Au V2 is a powerful FPGA development board built around a Xilinx Artix 7 device. It is aimed at engineers, students and makers who are ready to move beyond microcontroller-style programming and into field-programmable gate arrays.The board breaks out 104 IO pins across two headers an...

SKU: AF-483

Detect particles and/or make a cool random number generator with this handsome Geiger counter kit. This easy-to-make pack of parts turns a simple Geiger-Muller tube (included) into a portable blink, beeping radiation detector. You can also connect an FTDI friend to the header, to get serial ou...

SKU: DF-TEL0070

A multi-protocol converter board that supports USB, TTL, RS232, and RS485 interfaces. It can convert signals between any two protocols and supports one input to multiple outputs simultaneously — for example, converting a USB signal to TTL, RS232, and RS485 at the same time. Based on the FTDI FT2...

SKU: AF-6065 · MPN: ADA6065

The Adafruit CP2105 Friend provides two independent UART serial ports from a single USB-C connection — no USB hub required. Built around the Silicon Labs CP2105 dual-port bridge, it enumerates as two separate COM ports when plugged in, giving you an Enhanced port and a Standard port with differen...

SKU: DF-DFR1227-ENT · MPN: DFR1227-ENT

Built around an Intel Processor N150, the LattePanda IOTA is a compact x86 single-board computer designed for embedded PCs, robotics, intelligent gateways, industrial automation and interactive installations.It keeps the classic LattePanda V1 88mm x 70mm form factor and interface layout for easie...

SKU: AF-4446

The Adafruit eInk Feather Friend is a FeatherWing-format driver board for eInk/e-paper displays with a standard 24-pin FPC connector. It includes all the power supply circuitry and level shifting needed to connect your favourite display (up to tri-colour 4.2") to any Feather board via SPI, plus a...

SKU: EC-ARS01119B

ESP-WROOM-32 is a powerful, generic Wi-Fi+BT+BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding. The development board breaks out all the module’s pins to 0....

SKU: AF-364

The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a NFC tag. If you want to do any sort...

SKU: AF-2267

The Bluefruit LE Friend is your new BLE BFF! This USB-to-BLE board makes it easy to get your computer talking to your BLE enabled phone or tablet using a standard serial/UART connection. In it's simplest form, it works on the same principle as a common USB/Serial adapter (the FTDI Friend,...

SKU: AF-18

This USB-to-serial converter adds a DB9 RS-232 serial port to your computer via USB. Based on the FTDI FT232RL chip, it delivers true RS-232 voltage levels (approximately ±10V) rather than TTL 5V — ensuring compatibility with older devices like GPS receivers, handheld programmers, and other equip...

SKU: AF-5568

The Adafruit CH9102F Friend is a USB-to-Serial converter breakout featuring the affordable WCH CH9102F chip and a modern USB Type-C connector. It uploads code at up to 3 Mbit/s and includes auto-reset for Arduino/ATmega328 boards — no manual pin manipulation needed. The pinout matches standard F...

SKU: AF-4172

The Adafruit HUZZAH32 ESP32 Breakout is a compact, breadboard-friendly development board built around the Espressif ESP32 dual-core processor. With WiFi, Bluetooth Classic, and BLE support, 4 MB SPI Flash, and a generous set of GPIO, analog, and communication peripherals, it's a powerful and affo...

SKU: AF-5335

The Adafruit CP2102N Friend is a USB-to-serial converter breakout featuring the Silicon Labs CP2102N chip with USB Type-C. It provides reliable serial communication at up to 3 Mbps, making it ideal for uploading firmware to Arduino, ESP8266, ESP32, and other microcontrollers that use an FTDI-styl...

SKU: AF-4243

A flexible 2.13″ monochrome e-ink display with 212 × 104 pixel resolution, delivering crisp, paper-like visuals that remain visible even with no power applied. The high-contrast black-on-white image is excellent in direct sunlight and draws zero current when static. The flexible substrate allows...

SKU: AF-3975

Drive up to 8 strands of NeoPixels simultaneously with DMA — no more blocking your code to push pixel data. The NeoPXL8 Friend is a standalone level-shifting breakout board that converts 3.3 V logic to 5 V for 8 independent NeoPixel outputs, with a breadboard-friendly form factor that works with ...

SKU: AF-5879 · MPN: ADA5879

The Adafruit UPDI Friend is a compact USB serial programmer for ATtiny microcontrollers that use the UPDI (Unified Program and Debug Interface) protocol. Built around the CH340E USB serial converter with USB Type-C, it provides reliable cross-platform programming with switchable 3V or 5V power an...

SKU: AF-4746

The thirst is real! Keep your plants happy and hydrated with the Plant Care Kit for micro:bit or CLUE. This kit will teach you all about how to keep your plants in good condition, by measuring the soil moisture content using nails and alligator clips to tell you the state of your plantKit contain...

SKU: EF-EF03081

The NFC/RFID breakout based on PN532, which is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a N...