All Products
Showing 1-20 of 60 products
Dual/Quad Power Amplifier - STA540
The STA540 from STMicro is a 4-channel, class AB audio amplifier designed for high quality sound applications. The four independent channels makes this amplifier a great choice for a number of projects, with needs ranging from four speakers stereo (F/R) to two-speaker bridge solutions. The chi...
HIFI Digital Bluetooth Amplifier-50W*2
A HiFi digital power amplifier board with Bluetooth 5.0 and AUX input, delivering 50W per channel in a dual-channel configuration. With AM interference suppression and filtering, the board achieves THD as low as 0.1% even at sustained high-power output, producing clear, detailed sound. The board...
Bluetooth 4.2 Audio Receiver Board-with an Amplifier (2x5W)
This is a small size and cost-effective Bluetooth 4.2 Audio Receiver module with dual 5W power amplifier circuits. It supports auto-reconnect and can be powered by micro USB or 3.7V lithium battery. The module can be turned into a stereo Bluetooth speaker when connected with two speakers. Also, y...
Bluetooth Amplifier Board
This compact Bluetooth amplifier board provides wireless audio playback with 5W per channel (10W total) output via dual PAM8403 amplifier chips. Stream music wirelessly from any Bluetooth 5.0 compatible device directly to your speakers. The small form factor and 3mm mounting holes make it easy t...
Stereo 2.1W Class D Audio Amplifier - TPA2012
·
This incredibly small stereo amplifier is surprisingly powerful - able to deliver 2 x 2.1W channels into 4 ohm impedance speakers (@ 10% THD). Inside the miniature chip is a class D controller, able to run from 2.7V-5.5VDC. Since the amp is a class D, it's incredibly efficient (89% efficient when...
Stereo 3.7W Class D Audio Amplifier - MAX98306
·
This incredibly small stereo amplifier is surprisingly powerful - able to deliver 2 x 3.7W channels into 3 ohm impedance speakers. Inside the miniature chip is a class D controller, able to run from 2.7V-5.5VDC. Since the amp is a class D, its incredibly efficient (over 90% efficient when driving...
LM258P Dual Op-Amp - Through-Hole DIP
·
The LM258P is an easy-to-use dual-channel operational amplifier for breadboard-friendly and through-hole electronics projects. It is suited to common op-amp circuits such as transducer amplifiers, DC gain blocks and general analogue signal conditioning.This IC gives you two individual op-amps in ...
Stereo 20W Class D Audio Amplifier - MAX9744
·
A compact Class D stereo amplifier breakout based on the Maxim MAX9744. It drives two channels of 4–8 Ω speakers at up to 20 W each, powered from 4.5–14 V DC. With up to 93% efficiency, it runs cool without heatsinks — ideal for portable and battery-powered audio projects. Volume can be controll...
Large Heatsink - Multiwatt Package
This beefy heatsink is designed to dissipate a lot of heat! The 6400BG heatsink fits TO-220, TO-218, TO-247, and Multiwatt packages - which means it’s a great fit for the STA540, L298N, and all of our T-220 package voltage regulators. Documents: Datasheet
LG290P Quadband GNSS RTK Breakout (Qwiic)
·
Built around the Quectel LG290P, this compact RTK GNSS breakout is designed for high-precision positioning projects that need quad-band, multi-constellation reception. It follows the same board dimensions, pin layout and connectors as SparkFun’s GPS-RTK-SMA Breakout - ZED-F9P (Qwiic), making it a...
Op-amp (pack of 5) - LM224N
A pack of five LM224N quad general-purpose operational amplifiers in DIP-14 through-hole packages. Each IC contains four independent op-amps, making this pack ideal for analogue circuit prototyping, signal conditioning, and filter design. Specifications Part Number – LM224N Type – General pur...
RM500U-CN 5G HAT for Raspberry Pi, Quad Antennas LTE-A, Multi Band, 5G/4G/3G
A 5G cellular HAT for Raspberry Pi featuring the Quectel RM500U-CN module with quad antenna support. This board brings high-speed 5G, 4G LTE-A, and 3G connectivity to your Raspberry Pi, Jetson Nano, or PC — supporting both 5G NSA and SA networking modes. The HAT connects via USB 3.1 (USB 2.0 com...
Quectel LG290P Quad-Band GNSS RTK Module - Cut Tape
·
The Quectel LG290P is a compact, high-precision GNSS module for demanding positioning applications. It supports quad-band, multi-constellation reception across GPS, GLONASS, Galileo, BDS, QZSS and NavIC, along with SBAS augmentation systems including WAAS, EGNOS, BDSBAS, MSAS, GAGAN and SDCM.Desi...
Pimoroni Yukon – Yukon Make Anything! Kit
A high-power modular robotics and engineering platform, built around RP2040 and designed to drive the most ambitious robots, props and devices. The Do-Everything Board 🦾 Yukon is a standalone controller that can be equipped with up to six interchangeable modules capable of driving high-powe...
Buck-Boost DC/DC Converter 8-36V to 12V 6A
·
When your system needs a stable 12V rail from a variable DC supply, this industrial-grade buck-boost converter is built to deliver. It accepts a wide 8 to 36VDC input range and regulates it to 12V for loads up to 6A, or 72W.The buck-boost design automatically switches between stepping voltage dow...
45W DC-DC Converter 9V@5A
A waterproof DC-DC step-down (buck) converter that accepts 16–36V DC input and outputs a stable 9V at up to 5A (45W). The sealed, shockproof enclosure and 96% efficiency make it well suited for robotics, vehicles, and outdoor installations where reliable voltage regulation is needed. Key Feature...
DC-DC boost converter
This 20W adjustable DC-DC boost converter with a digital display is based on the professional boost chip and supports 3~32V power input, 5~35V output, and an accuracy of ±0.05V. The switching frequency is 400KHz, the conversion efficiency can reach 94%, it has the functions of overheating prote...
1.54inch E-Paper Display Development Board
The product is a high-performance, highly integrated microcontroller development board designed by Waveshare. It integrates high-capacity Flash and onboard 1.54inch e-paper display, features ultra-low power consumption and ambient light readability, suitable for portable devices and long-Batt-li...
DIY Light Controlled Phonograph Kit For Micro:bit
The DIY Light Controlled Phonograph Kit is a hands-on STEM project that combines woodworking assembly with basic electronics and programming. Built on a basswood structural base, this phonograph uses a photoresistor to detect light levels and an 8002B power amplifier to drive audio playback, lett...
ESP32(ESP-WROOM-32) WiFi Bluetooth Dual-Core MCU Module
INTRODUCTION The ESP32 WiFi and Bluetooth chip is the latest generation of Espressif products. It has a dual-core 32-bit MCU, which integrates WiFi HT40 and Bluetooth/BLE 4.2 technology inside. Compared to the arduino ESP8266 (the previous generation), the ESP32 has a significant ...
