All Products

SKU: AF-654

A standard CR2032 lithium coin cell battery providing 3V nominal output. This non-rechargeable cell is widely used in electronics projects, wearables, and sewable circuits. Specifications Type – CR2032 lithium coin cell (non-rechargeable) Nominal Voltage – 3V (starts at ~3.2V, drifts to ~2.5V...

SKU: PI-COM1900

A sewable coin cell battery holder designed for wearable electronics projects. The metal tabs have small 1mm holes that accommodate a #5 or smaller needle, making it easy to sew directly onto fabric with conductive thread. The holder accepts standard CR2032 lithium coin cells (3V, ~200mAh), whic...

SKU: LB-00081

A standard CR2032 3 V lithium coin cell battery. Commonly used in real-time clocks, key fobs, wearable electronics, LED throwies, and e-textile projects with LilyPad battery holders. Specifications Type – CR2032 lithium coin cell Voltage – 3 V Chemistry – Lithium manganese dioxide Warning...

SKU: SF-PRT-11928

The CR2025 is a 20mm lithium coin cell battery rated at 3V with a 165 mAh capacity. At just 2.5mm thick, it's 0.7mm thinner than the more common CR2032, making it ideal for applications where space is at a premium. A reliable choice for remote controls, calculators, key fobs, and other compact e...

SKU: AF-2850

The CR2450 is a high-capacity 3V lithium coin cell battery, ideal for powering microcontroller projects, sensors, key fobs, and other small electronics that need reliable, long-lasting power. With a generous 610mAh capacity and a compact 24.5mm diameter form factor, the CR2450 delivers significa...

SKU: SF-PRT-00338

CR2032 Lithium metal 3V 250mAh button cell battery. Great for powering low power processors or blink an LED for weeks at a time. Note: This item is non-returnable. If this item arrives damaged or is not functioning properly, please do not hesitate to contact us to see if further actions may be ta...

SKU: AF-653

This sewable CR2032 battery holder makes it easy to add power to wearable electronics projects. Two small 1mm holes in the metal connection tabs are perfectly sized for a #5 or smaller needle to pass through, so you can stitch it directly onto fabric with conductive thread. One tab connects to g...

SKU: AF-3672

This kit is designed for use with the electronic textiles unit in the Exploring Computer Science (ECS, exploringcs.org) introductory computing curriculum for secondary students. It contains most of the materials needed for four e-textiles projects: paper circuit, wristband, mural, and hum...

SKU: LB-JSTBOARD

This E-textiles board is a breakout for a JST, so you can sew it onto a garment or use it in Paper Circuits! The JST breakout board can be easily sewn through the large holes. For paper circuits, simply apply copper tape on top of it.A wearable lithium polymer battery or wearable lipo also kno...