All Products

SKU: SF-DEV-22659

BeaglePlay is an open-source single board computer built around the Texas Instruments AM6254 processor (quad-core ARM Cortex-A53) with 2GB DDR4 RAM and 16GB eMMC storage. It is designed to simplify connecting sensors, actuators, and human interfaces to a reliable embedded Linux system. The board...

SKU: AF-2218

The TFP401 breakout is a compact HDMI/DVI decoder that outputs raw 24-bit colour pixel data to 40-pin TTL displays. It decodes unencrypted video at any resolution from 25–165 MHz pixel clock (up to 1080p) and includes a built-in backlight driver with PWM dimming control. Designed for use with si...

SKU: AF-2396

This 7" HDMI display with resistive touchscreen delivers 1024×600 resolution in a compact form factor ideal for Raspberry Pi, BeagleBone Black, and other single-board computers. The included mini driver board is powered via USB and accepts HDMI input for high-quality video output. The kit also i...

SKU: EC-DISSF116P

An 11.6-inch 1920×1080 IPS touchscreen monitor with HDMI and VGA inputs. The 10-point capacitive touch panel is plug-and-play over USB — no drivers required. Built-in dual speakers, a 3.5mm headphone jack, and a 3.5mm audio input round out the connectivity. Compatible with Raspberry Pi (3, 4, 5)...

SKU: AF-6004 · MPN: ADA6004

This panel-mount USB extension cable runs a USB Type-A port through an enclosure wall. The socket end has two flexible mounting ears with pre-installed M3 screws for securing to a panel, while the plug end connects to a USB host device inside the enclosure — ideal for Raspberry Pi, BeagleBone, or...

SKU: LB-LR0121L

This HD 7-inch Touch Screen Display is an affordable way to add video output to your Raspberry Pi.  The display has a resolution of 1024 x 600, and supports the Raspberry Pi 3 Model B(and other hardware such as the Banana Pi and Orange Pi, Beaglebone Black etc). The display connects to your...

SKU: AF-2395

A 7-inch touchscreen display with 1024×600 resolution and a resistive touchscreen overlay, ideal for Raspberry Pi projects, embedded computing, and multimedia setups. The included driver board supports HDMI, VGA, and composite (NTSC/PAL) inputs, making it compatible with a wide range of devices. ...

SKU: EL-DIS12101C

A 10.1" IPS capacitive touchscreen monitor with 1280 × 800 resolution, built-in dual stereo speakers, and a metal enclosure. It supports mini-HDMI and VGA video inputs with signal switching, and features 5-point touch with the GT911 touch controller — driver-free on most systems. The display is ...

SKU: AF-2998

Do you want your cup to runneth over with USB ports? Do you want it to also be filled with the sweet, sweet nectar of an on-off switch? If the answer to either of those questions is yes - or "I never really thought about it that way but I guess so" - then this is the perfect product for you! T...

SKU: AF-2397

This 7″ display kit features a 1024×600 resolution TFT panel with a resistive touchscreen overlay and HDMI stereo audio output. The included driver board accepts HDMI, VGA, and composite (NTSC/PAL) video inputs, making it compatible with Raspberry Pi, BeagleBone, and any device with standard vide...

SKU: AF-706

These extra-long stacking headers are designed for BeagleBone Capes, allowing you to stack multiple capes on a single BeagleBone for modular, expandable designs. They work just like standard 2×23 0.1"-spaced female headers, but with extended legs that solder through a PCB and plug directly into t...

SKU: AF-974

This flexible USB swivel adapter will extend your USB port out of the way. Useful when you want to attach a 'bulky' USB device without blocking a secondary port. We thought this would be handy for BeagleBone or Raspberry Pi users. Rotates 180 degrees in two axes, with a very nice solid construction.

SKU: AF-2353

This 7.0" TFT display packs 800×480 pixels with an LED backlight and 24-bit colour capability via its 40-pin connector (8 red, 8 green, 8 blue parallel pins). It's ideal for projects requiring a large display area for graphics, menus, or data visualisation. This is a raw pixel-dot-clock display ...

SKU: AF-4827

A compact USB dongle that adds both Wi-Fi and Bluetooth 4.0 to your computer or single-board computer through a single USB port. Based on the Realtek RTL8723BU chipset, it provides 802.11bgn wireless LAN and Bluetooth Low Energy (BLE) connectivity — ideal for Raspberry Pi, BeagleBone, or any Linu...

SKU: EC-DIS85101D

This 10.1-inch HDMI touchscreen monitor has a high-definition resolution of 1280*800 and supports a viewing angle of 178°, providing an excellent visual experience. It supports Raspberry Pi, Windows, Linux, Ubuntu and other systems, and is also compatible with Raspberry Pi 3/3B+/4B/5, Jetson Nano...

SKU: SF-PRT-12791

This is a 2x23 pin male PTH header. This piece is in the common configuration for Beaglebone Black headers that can be broken apart to form smaller header formations. Each pin has a spacing of 0.1" in between each other.Documents:Datasheet

SKU: AF-954

The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USB<->Serial conversion chip and at the end of the 36" cable are four wire - red power, black ground, white RX into USB port, and green TX out of the USB por...

SKU: AF-2354

This 7.0" TFT display packs 800×480 pixels with an LED backlight and a 4-wire resistive touchscreen overlay. With 24-bit colour capability via its 40-pin connector (8 red, 8 green, 8 blue parallel pins), it's ideal for projects requiring a large, interactive display area. This is a raw pixel-dot...

SKU: SF-PRT-12790

This is a 2x23 pin female PTH header, with extra long legs which makes great for stacking. This piece is in the common configuration for Beaglebone Black headers. Each pin has a spacing of 0.1" in between each other. Documents: Datasheet

SKU: AF-2076

These 2×23 male headers plug directly into the side sockets on the BeagleBone Black, allowing you to attach prototype PCBs or capes. Each pack includes two headers — one for each side of the BeagleBone Black. Key Features 2×23 Pin Layout – Matches the BeagleBone Black expansion headers 2.54 m...