All Products
Showing 1-8 of 8 products
Terminal Block Shield for Arduino
Ethernet and PoE Shield for Arduino - W5500 Chipset
DFRduino Ethernet Shield V2.1 (Support Mega and Micro SD)
Ethernet Shield for Arduino - W5200
USB Serial Light Adapter - Atmega8U2 (Arduino Compatible)
W5200 Ethernet Shield
Flanged Weatherproof Enclosure With PG-7 Cable Glands
![RGB LCD Shield Kit w/ 16x2 Character Display - Only 2 pins used! [NEGATIVE DISPLAY]](/rails/active_storage/representations/redirect/BAh7BkkiC19yYWlscwY6BkVUewdJIglkYXRhBjsAVGkCF7lJIghwdXIGOwBUSSIMYmxvYl9pZAY7AEY=--0883aa3da2556af503415e4369ac1ea4edea3f67/BAh7BkkiC19yYWlscwY6BkVUewdJIglkYXRhBjsAVHsHOgtmb3JtYXRJIghqcGcGOwBUOhJyZXNpemVfdG9fZml0WwdpApABaQKQAUkiCHB1cgY7AFRJIg52YXJpYXRpb24GOwBG--4cc5678865497cdbcf7b02aee5242eda5f847322/image_18e09e74-2f47-4aba-ac26-cce092db95a0.jpg)
RGB LCD Shield Kit w/ 16x2 Character Display - Only 2 pins used! [NEGATIVE DISPLAY]
Terminal Block Shield for Arduino
The Terminal Block Shield for Arduino replaces loose jumper wires with secure screw-terminal connections, making your wiring stable and reliable. Each Arduino pin is broken out to a 3.5 mm pitch terminal block, and multiple 3.3V, 5V, and GND ports are provided for convenient power distribution. ...
Ethernet and PoE Shield for Arduino - W5500 Chipset
The W5500 Ethernet expansion board is a new member of the DFRobot Ethernet family. It integrates PoE power supply and W5500 Ethernet chip, which can meet the requirements of general IoT projects.The W5500 chip is a Hardwired TCP/IP embedded Ethernet controller that provides easier Internet connec...
DFRduino Ethernet Shield V2.1 (Support Mega and Micro SD)
The DFRduino Ethernet Shield V2.1 is now released. This version of Ethernet Shield is not only compatible with Mega 1280 and 2560, but also provides a Micro SD card slot for reading/writing. DFRduino Ethernet Shield V2.1 is fully compatible with Ardunio Ethernet Shield. With the offical e...
Ethernet Shield for Arduino - W5200
An Arduino-compatible Ethernet shield based on the Wiznet W5200 chip, providing a simple way to connect your Arduino to a network. It plugs directly onto an Arduino Uno or Mega 2560 and supports stacking additional shields on top. An aluminium alloy heatsink is fitted to the W5200 chip for therma...
USB Serial Light Adapter - Atmega8U2 (Arduino Compatible)
This is a new version of the FTDI breakout board features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno. The 8U2 firmware uses the standard USB COM drivers, and no external driver is needed. However, on some Windows systems installing the drive...
W5200 Ethernet Shield
The W5200 Ethernet Shield adds wired internet connectivity to your Arduino. Simply stack it onto your board, connect an RJ45 cable, and start communicating over the network. The W5200 controller provides a 32 KB internal buffer — double that of the W5100 — and supports up to eight simultaneous TC...
Flanged Weatherproof Enclosure With PG-7 Cable Glands
A heavy-duty weatherproof enclosure with mounting flanges and two built-in PG-7 cable glands. The machinable ABS plastic body and polycarbonate cover are sealed with a built-in gasket, and the cable glands allow weather-tight cable entry while keeping dust and moisture out. The enclosure fits an...
RGB LCD Shield Kit w/ 16x2 Character Display - Only 2 pins used! [NEGATIVE DISPLAY]
This new Adafruit shield makes it easy to use a 16x2 Character LCD. We really like the RGB LCDs we stock in the shop both the RGB negative and RGB positive. Unfortunately, these LCDs do require quite a few digital pins, 6 to control the LCD and then another 3 to control the RGB backlight for a...
