All Products

SKU: AF-123

A pre-programmed ATmega328P chip with the Adafruit 'ADAboot' bootloader, ready to drop into an Arduino Uno, Duemilanove, Diecimila, or NG board. Use it to replace a damaged chip or build your own Arduino-compatible project on a breadboard or custom PCB. The ADAboot bootloader is compatible with ...

SKU: AF-462

Turn any Arduino into an AVR chip programmer with this shield kit. Designed for burning Arduino bootloaders onto blank ATmega328P chips, it can also be configured as a standalone AVR ISP programmer that works without a computer — program blank chips up to 10× faster with audio feedback from the b...

SKU: LB-PT9012

This ATmega328P-PU microcontroller comes in a 28-pin DIP package with the Arduino Uno Optiboot bootloader pre-loaded. Drop it into a breadboard or custom PCB and program it directly from the Arduino IDE — no Arduino board required. To get started, you'll need an external 16 MHz crystal or resona...

SKU: SF-DEV-10524

The name says it all on this one. An ATmega328 in DIP package, pre-loaded with the Arduino Optiboot (Uno 16MHz) Bootloader. This will allow you to use Arduino code in your custom embedded project without having to use an actual Arduino board. To get this chip working with Arduino IDE, you wi...

SKU: PI-EMS-955

LED desk/mantle shadow clock soldering kit The Bulbdial Clock kit is based on an original design concept from IronicSans.com and developed at Evil Mad Scientist Laboratories. It works like an indoor sundial, but with three shadows of different length. You tell the time just like yo...

SKU: AF-2488

The Adafruit METRO 328 is a fully assembled, Arduino UNO R3-compatible development board powered by the ATmega328P running at 16 MHz. It's shape and pin-compatible with Arduino UNO R3 shields, and works directly with the Arduino IDE by selecting "Arduino UNO" in the Boards menu. This version come...

SKU: EC-AAM328AT

This is a ATmega328 IC in DIP package, pre-loaded with the Arduino Optiboot (Atmega328 16MHz) Bootloader. This will allow you to use Arduino code in your custom embedded project without having to use an actual Arduino board.To get this chip works, you will need an external 16MHz crystal or resona...

SKU: AF-2010

Note: The Pro Trinket's bit-bang USB technique is a legacy approach that may not work reliably with modern operating systems. For new projects, consider an ItsyBitsy or Metro Mini board with native USB support at a comparable price. The Adafruit Pro Trinket 3V is a compact ATmega328P-based mic...

SKU: AF-193

This budget pack is an optimized collection of parts and pieces to experiment with Adafruit Metro 328 and the Arduino IDE at home, school or work. Great for students and those that want to get their feet wet, no soldering required!Includes the Adafruit Metro 328 with thru-hole heade...

SKU: AF-2000

Note: The Pro Trinket's bit-bang USB technique is a legacy approach that may not work reliably with modern operating systems. For new projects, consider an ItsyBitsy or Metro Mini board with native USB support at a comparable price. The Adafruit Pro Trinket 5V is a compact ATmega328P-based mic...

SKU: SF-DEV-10116

The Arduino Fio (Funnel I/O) is a compact, wireless-friendly development board based on the ATmega328P. Designed by Shigeru Kobayashi and inspired by the LilyPad, the Fio includes a built-in lithium polymer battery connector with USB charging circuit, and an XBee socket on the underside for wirel...

SKU: SF-COM-11442

The SparkFun 7-Segment Serial Display combines a 4-digit 7-segment LED display with an ATmega328 microcontroller, allowing you to control every segment using just a few serial lines. It supports three communication interfaces — Serial TTL, SPI, and I²C — making it easy to integrate into a wide ra...

SKU: AF-50

We sure love the ATmega328 here at Adafruit, and we use them a lot for our own projects. The processor has plenty of GPIO, Analog inputs, hardware UART SPI and I2C, timers and PWM galore - just enough for most simple projects. When we need to go small, we use a Metro Mini or a Trinket M0,...

SKU: AF-3458

The Feather 328P brings the classic ATmega328P into the Feather ecosystem, running at 3.3V and 8 MHz. If you want to keep your existing Arduino code compatibility while taking advantage of the Feather form factor and its wide range of FeatherWing add-ons, this board is an excellent choice. With ...

SKU: AF-2590

The Adafruit Metro Mini 328 packs the same ATmega328P power as a full-sized Metro into a tiny breadboard-friendly form factor. Running at 16 MHz with 5V logic, it's pin-compatible with Arduino UNO R3 and works with the Arduino IDE by selecting "Arduino UNO" in the Boards menu. For the latest revi...

SKU: SF-DEV-18158 · MPN: DEV-18158

This Arduino-compatible development board keeps the familiar Uno-style layout while adding a few genuinely handy upgrades for modern projects. Built around the ATmega328P, it works with the Arduino IDE and fits the Uno R3 footprint, so it is a straightforward choice if you want broad compatibilit...

SKU: DF-DFR0492

DFRobot FireBeetle series are low power consumption microcontrollers designed for Internet of Things (IoT) development. This Bluetooth controller combines Bluetooth Low Energy 4.1 with Arduino controller, offering functions similar to the former Bluno series but with lower power consumption. ...

SKU: EC-CDD10240D

The devDuino Relay 1 Node V1.0 is a compact Arduino-compatible microcontroller board with a built-in mains power supply (110–220 V AC), a 10 A relay, and an nRF24L01+ wireless transceiver. It is designed for building wireless home automation networks with support for over-the-air (OTA) firmware u...

SKU: SF-SPX-14669

The SparkFun BlackBoard is an Arduino Uno-compatible development board with a range of improvements over the standard Uno. It features the CH340G USB-to-serial converter for broad driver compatibility, a reinforced through-hole micro-B USB connector, an upgraded 600 mA 3.3V regulator with thermal...

SKU: PI-A000073

The board everybody gets started with, with the ATmega328 (SMD). It has 14 digital IO pins (6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, and more. The Arduino Uno SMD R3 is a microcontroller board based on the ATmeg...