All Products

SKU: AF-617

A 2-pack of standard alkaline AAA batteries for powering portable electronics, kits, and projects. These use alkaline (MnO2) chemistry with a voltage range of 1.6V (fresh) to 0.8V (depleted) and a capacity of approximately 1200mAh at a 25mA discharge rate. Specifications Type – AAA Chemistry ...

SKU: TB-SB2328

A bulk pack of 40 AAA alkaline batteries. Mercury and cadmium free, suitable for everyday household appliances such as remote controls, torches, toys, and cameras. Specifications Battery Type – AAA Alkaline Usage – Disposable (single use) Connection – Standard nipple terminal Pack Quantity ...

SKU: TB-SB2933

This range of Panasonic eneloop batteries have numerous advantages over regular rechargeables. Key characteristics include low self-discharge, they are pre-charged so can be used right out of the packet, and can be recharged up to 1800 times. After 5 years of storage they will retain up to 70% of...

SKU: AF-3517

Everything you need to get started with the Circuit Playground Express — a feature-packed, all-in-one development board that works with Microsoft MakeCode (block-based or JavaScript), CircuitPython, code.org CS Discoveries, and Arduino IDE. Program the same board in multiple ways as your skills g...

SKU: DF-FIT0625 · MPN: FIT0625

This compact battery holder is a handy portable power pack for small electronics and maker projects. It holds two AAA batteries and connects them in series, making it suitable for projects that need a simple removable battery supply.The holder includes a cover and an integrated power switch, so y...

SKU: AF-4191

A slim 2×AAA battery holder with a built-in on/off switch and genuine JST PH connector. Two AAA batteries in series provide approximately 3V — ideal for powering low-voltage electronics projects, microcontrollers, and portable builds. The JST PH connector polarity matches Adafruit's Li-Ion/LiPo ...

SKU: AF-4192

A slim, open-top 2×AAA battery holder with a genuine JST PH connector. Two AAA batteries in series provide approximately 3V — ideal for powering low-voltage electronics projects, microcontrollers, and boards with JST PH battery inputs. The JST PH connector polarity matches Adafruit's Li-Ion/LiPo...

SKU: LB-PAPER-SAFE

A paper circuits kit designed with child safety in mind, using AAA battery packs with breakout boards instead of coin cell batteries. Paper circuits are a fantastic way to teach the basics of electricity and circuit building without soldering or coding — just copper tape, LEDs, and a battery. Pr...

SKU: EF-EF11085

A clear battery holder designed for the BBC micro:bit, holding two AAA batteries. Features a built-in on/off switch and a PH2.0 connector that plugs directly into the micro:bit's battery port. The transparent casing lets you see the batteries inside. Specifications Battery Type – 2× AAA (not i...

SKU: SF-PRT-10218

A standard 9V alkaline battery (Rayovac). Suitable for powering Arduino boards, breadboard projects, and other electronics — use with a voltage regulator to get a stable 5V output. Key Features 9V Alkaline – Standard disposable battery Rayovac Brand – Reliable performance Also Available 9...

SKU: AF-1737

A compact wireless QWERTY keyboard with a USB dongle, ideal for pairing with a Raspberry Pi, BeagleBone, or any computer with a USB port. The slim chiclet-style keys provide a comfortable typing experience in a small footprint. The wireless USB dongle is plug-and-play — it shows up as a standard...

SKU: LB-LS3337

An enclosed battery holder for three AAA cells with a built-in on/off switch. The snap-on lid fully covers the batteries, keeping them secure during use. Wire leads allow you to connect directly to your project. Three AAA cells in series provide approximately 4.5V (alkaline) or 3.6V (NiMH), suit...

SKU: AF-3520

A 3-pack of standard alkaline AAA batteries for powering portable electronics, kits, and projects. These use alkaline (MnO2) chemistry with a voltage range of 1.6V (fresh) to 0.8V (depleted) and a capacity of approximately 1200mAh at a 25mA discharge rate. Specifications Type – AAA Chemistry ...

SKU: AF-4060

The thirst is real! Keep your flora (plants, not the board *wink*) happy and hydrated with the Circuit Playground Express Soil Sensor Mini Kit. This kit will teach you all about how to keep your plants in good condition, by measuring the soil moisture content using a nail and alligator clip,...

SKU: AF-628

A complete starter pack for getting into electroluminescent (EL) panels. Includes a 10 × 10 cm white EL panel, a portable battery-powered inverter, and AAA batteries — everything you need to start glowing right out of the box. The 4×AAA inverter drives a single panel and provides approximately 1...

SKU: DF-FIT0626

This battery holder connects 3× AAA batteries in series, providing approximately 4.5V from alkaline cells. It features a PH2.0-2P connector, making it compatible with DFRobot boards and other devices that use the PH2.0 power interface, including the Maqueen robot car. Key Features 3× AAA Serie...

SKU: AF-6352 · MPN: ADA6352

This classroom-friendly kit pairs a micro:bit v2.2 with a simple soil sensor so students can monitor a pot plant and learn a bit of programming at the same time. It was designed to work with the "FarmBeats for Students" curriculum, where the micro:bit can show smile and frown status reports to in...

SKU: AF-632

A complete starter pack for electroluminescent (EL) tape projects, including a 1 m aqua EL tape strip, a portable battery-powered inverter, and batteries. Everything needed to get started with EL lighting right out of the box — no additional components required. Key Features Complete Kit – EL ...

SKU: TB-SB2332

Stock up and save with this bulk pack of 40 AA alkaline batteries. Ideal for keeping your workshop, classroom, or household powered without running out at critical moments. These reliable 1.5V batteries are mercury and cadmium free, making them an environmentally conscious choice for everyday de...

SKU: AF-1405

Get started with the fabulous Adafruit Flora platform with this lovely budget kit, just enough to get you started with this fun wearable computer. Included are enough parts to make your first wearable electronic project. There's a Flora motherboard, four ultra-bright chainable RGB pixels, a 3x...