All Products

SKU: AF-1601

The Adafruit PiTFT 2.8" is a colour touchscreen display designed for the Raspberry Pi. Featuring a 2.8-inch 320×240 pixel TFT with 16-bit colour and a resistive touch overlay, it works as a mini console, X Window display, image viewer, or video player — all driven over the Pi's high-speed SPI int...

SKU: AF-2298

Is this not the cutest little display for the Raspberry Pi? It features a 2.8" display with 320x240 16-bit color pixels and a resistive touch overlay. The plate uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video...

SKU: AF-2423

The Adafruit PiTFT Plus 2.8" Capacitive Touchscreen is a finger-friendly colour display for the Raspberry Pi. Unlike resistive touchscreens that need a stylus or fingernail, this capacitive version responds to a light finger touch and features a polished black bezel with a glass overlay for a cle...

SKU: AF-3974

This kit turns a Raspberry Pi 3 into a network-wide ad blocker using Pi-hole, an open-source DNS sinkhole. Once set up, Pi-hole blocks advertisements and tracking domains for every device on your network — computers, tablets, phones — without requiring ad-blocker plugins on individual devices. T...

SKU: AF-1774

The 2.8" TFT Display with Resistive Touchscreen is a bare LCD module featuring 320×240 resolution with individual RGB pixel control. Driven by the ILI9341 chipset, it supports SPI (3- or 4-wire), 8-bit parallel, and 16-bit parallel interfaces. The resistive touchscreen is an analogue type that r...

SKU: AF-1770

The 2.8" TFT LCD Breakout Board features a bright, full-colour display with a resistive touchscreen and an onboard MicroSD card socket. With 240×320 resolution and individual RGB pixel control, it delivers vivid colour output for interactive projects. The breakout supports two interface modes: 8...

SKU: AF-2354

This 7.0" TFT display packs 800×480 pixels with an LED backlight and a 4-wire resistive touchscreen overlay. With 24-bit colour capability via its 40-pin connector (8 red, 8 green, 8 blue parallel pins), it's ideal for projects requiring a large, interactive display area. This is a raw pixel-dot...

SKU: DF-DFR0665

The 2.8" IPS TFT LCD Touchscreen is a full-colour display module with integrated resistive touch and a MicroSD card slot. Driven by the ILI9341 display controller and XPT2046 touch controller, it communicates over SPI and works with both 3.3V and 5V logic. The IPS panel provides wide viewing ang...

SKU: AF-4311

A vibrant 2.0" IPS TFT display breakout with 320×240 resolution and full-colour output, driven by the ST7789 controller. The IPS panel delivers vivid colour reproduction and wide viewing angles — a significant upgrade over CSTN-type displays found in older LCD modules. The breakout communicates ...

SKU: AF-2090

The 2.8" TFT LCD Breakout Board features a bright, full-colour display with a capacitive single-touch touchscreen and an onboard MicroSD card socket. With 240×320 resolution and individual RGB pixel control, it delivers vivid colour output for interactive projects. The breakout supports two inte...

SKU: AF-2616

A 3.2" TFT display with 320×240 resolution and resistive touchscreen overlay, designed to plug directly onto any Raspberry Pi with a 2×20 GPIO header (Pi Zero, Pi 3, Pi 4, Pi 5, Model A+, and B+). The display connects via the high-speed SPI interface and can be used as a console output, X11 displ...

SKU: AF-3275

If the holidays promise anything, it’s almost certainly a deluge of photographs. Instead of taking out your smartphones, why not build your own camera? With one of Adafruit’s best selling screens and an official Raspberry Pi camera, you’ll be ready to set up your very own digital camera in ...

SKU: AF-2397

This 7″ display kit features a 1024×600 resolution TFT panel with a resistive touchscreen overlay and HDMI stereo audio output. The included driver board accepts HDMI, VGA, and composite (NTSC/PAL) video inputs, making it compatible with Raspberry Pi, BeagleBone, and any device with standard vide...

SKU: AF-2455

The Adafruit PiTFT 2.4" HAT Mini Kit is a compact colour touchscreen display that plugs directly onto your Raspberry Pi's GPIO header. Featuring a 2.4-inch 320×240 pixel TFT with 16-bit colour and a resistive touch overlay, it's ideal for building interactive interfaces, mini consoles, or portabl...

SKU: AF-1743

A large 3.2" colour TFT LCD breakout board with a built-in resistive touchscreen and a microSD card socket. The 240×320 pixel display is driven by the ILI9341 chipset and features a bright 6-LED white backlight. The breakout board includes 3–5 V level shifters, making it compatible with both 3.3 ...

SKU: AF-1596

A 5.0-inch TFT display with 800×480 resolution, LED backlight, and a 4-wire resistive touchscreen overlay. The touchscreen adds user input capability for interactive interfaces, menus, and control panels. This is the touchscreen version of the 5.0" 40-pin TFT Display without Touchscreen. This is...

SKU: EC-DIS04028H

CrowPanel ESP32 Display 2.8-inch SPI module is a powerful HMI touch screen with a 320*240 resolution LCD display. It uses the ESP32-WROOM-32 module as the main control processor, with a dual-core 32-bit LX6 microprocessor, integrated WiFi and Bluetooth wireless functions, a main frequency of up t...

SKU: SF-LCD-29467 · MPN: LCD-29467

  The SparkFun Red Vision Touch Display for Pico features a 2.0", 320x240px capacative touch LCD mounted on a breakout board designed to plug directly into the Control Board on the Experiential Robotics Platform (XRP) Kit as well as Raspberry Pi Picos. This display board includ...

SKU: AF-2453

The Adafruit DPI TFT Kippah with Touch Support connects a 40-pin TTL TFT display directly to your Raspberry Pi's GPIO header, bypassing the need for an HDMI encoder/decoder. This version adds resistive touchscreen capability via USB, making it suitable for interactive projects and kiosks. Compat...

SKU: AF-4506

The Adafruit 1.3" Colour TFT Bonnet for Raspberry Pi combines a 240×240 IPS TFT display with a 5-way joystick and two pushbuttons on a single plug-and-play bonnet. The display is driven by the ST7789 controller over SPI, delivering vibrant 16-bit colour with wide viewing angles. A Qwiic/STEMMA Q...