All Products

SKU: AF-919 · MPN: 919

This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors. Unfortunately they are not compatible! This adapter solves the problem with a RP-SMA jack on one end and an SMA Plug on the other. We a...

SKU: AF-920 · MPN: 920

This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors. Unfortunately they are not compatible! This adapter solves the problem with an SMA jack on one end and an RP-SMA Plug on the other. We ...

SKU: WS-21706

EM06-E LTE Cat-6 HAT for Raspberry Pi, dual antennas LTE-A, multi regions multi band, GNSSEM06-E LTE Cat-6 HAT for Raspberry PiSupports LTE-A and UMTS/HSPA(+) multi networksmulti-constellation high-accuracy GNSS, cloud platform communication, LTE-A networkingFeatures at a glanceThis is an LTE Cat...

SKU: AF-5444 · MPN: 5444

An adapter cable that connects an RP-SMA antenna to RF modules with a w.FL (MHF3 / IPEX3) connector. Essential for adding external antennas to Wi-Fi, Bluetooth, and other RF boards that use the tiny w.FL port — such as the Adafruit Feather ESP32 V2. The cable is just over 20 cm (7.8″) long, with...

SKU: SF-GPS-23748 · MPN: GPS-23748

The SparkFun RTK mosaic-X5 is a high-precision GNSS positioning and navigation receiver built around the Septentrio mosaic-X5 multi-constellation, multi-frequency module. Supporting GPS, GLONASS, Beidou, Galileo, NavIC, SBAS, and QZSS across L1/L2/L5 bands, the 448-channel receiver delivers centi...

SKU: AF-851 · MPN: 851

This RF adapter cable bridges the gap between small u.FL board connectors and standard SMA antennas. One end has a panel-mount SMA female connector, the other a u.FL (also known as IPEX, IPAX, IPX, MHF) plug — ideal for connecting external antennas to GPS modules, cellular modules, and other RF b...

SKU: TB-PA0629

SMA Socket to Reverse SMA Socket - Gold. Specifications Computer Input Connection SMA Plug or Socket? Socket Output Type Reverse SMA ...

SKU: WS-21705

A 5G cellular HAT for Raspberry Pi featuring the Quectel RM500U-CN module with quad antenna support. This board brings high-speed 5G, 4G LTE-A, and 3G connectivity to your Raspberry Pi, Jetson Nano, or PC — supporting both 5G NSA and SA networking modes. The HAT connects via USB 3.1 (USB 2.0 com...

SKU: AF-1497 · MPN: 1497

This USB software defined radio (SDR) receiver is built around the RTL2832U demodulator and R820T tuner, covering a wide frequency range from 24 MHz to 1850 MHz. Simply plug it into a Windows, Mac, or Linux computer to tune into a variety of radio signals using free SDR software. With the right ...

SKU: AF-3133 · MPN: 3133

The Adafruit Ultimate GPS FeatherWing brings precise, low-power GPS to the Feather ecosystem. Built around the MTK3339 chipset, it tracks up to 22 satellites on 66 channels with -165 dBm sensitivity and delivers up to 10 position updates per second — all while drawing only 20 mA. Simply plug the...

SKU: AF-1858 · MPN: 1858

This 2.2"/57mm long antenna has 2dBi of gain and 50Ω impedance so it will work fantastically with just about any 850/900/1800/1900/2100 wireless receiver/transmitter such as any Cellular or GSM/GPRS device. Antenna comes with a Right-angle SMA connector. If you need to connect this to an RP...

SKU: AF-1859 · MPN: 1859

This 2.4"/61mm long antenna has 2dBi of gain and 50Ω impedance so it will work fantastically with just about any 850/900/1800/1900/2100 wireless receiver/transmitter such as any Cellular or GSM/GPRS device. Antenna comes with a SMA connector, which is the most common type you'll see for Cell...