All Products

SKU: PH-CAMJAMEDUKIT3

The third in the CamJam EduKit series, focused on robotics. This kit contains almost everything you need to build a Raspberry Pi-powered robot — just add your own Raspberry Pi (any model), chassis, and batteries. Follow the included worksheets to build a motorised buggy with obstacle detection an...

SKU: WS-25376

WAVE ROVER Flexible And Expandable 4WD Mobile Robot Chassis, Full Metal Body, Multiple Hosts Support, With Onboard ESP32 Module Features at a glance The WAVE ROVER is a full metal body 4WD mobile robot chassis, which features superb off-road crossing a...

SKU: KI-5335

The Kitronik Autonomous Robotics Platform Pico, a fun and hands-on introduction to Robotics with the Raspberry Pi Pico. The Kitronik Autonomous Robotics Platform for Raspberry Pi Pico is a fun and hands-on introduction to buggy robotics. The easy to follow booklet provided with the kit guides you...

SKU: WS-20380

The PicoGo is a smart mobile robot platform designed for the Raspberry Pi Pico. It integrates line-following, obstacle avoidance, ultrasonic ranging, object tracking, Bluetooth and IR remote control, an LCD display, and RGB LEDs — all on a single board with no messy external wiring. Powered by t...

SKU: SS-6000200319

Pico robot is a compact and cost-effective educational programmable 2WD smart car. It is based on Raspberry Pi Pico, and uses the MicroPython as programming language, combined with on-board sensors, many interesting functions are realized. This robot possess an infrared receiver and a Bluetoot...

SKU: PH-103393

A Raspberry Pi motor controller HAT built around the L293D dual H-bridge driver IC, designed to make building a Raspberry Pi robot easy and fun. Control up to 4 DC motors or 2 stepper motors at up to 600 mA (1 A peak) per channel. The board includes breakout connectors for IR line sensors and an...

SKU: PR-PIM142

5.... 4.... 3.... 2.... 1.... Turn your Raspberry Pi into a spaceship! This robot chassis is designed to be used with our Explorer HAT, Explorer HAT Pro, or Explorer pHAT boards though it will work with other motor drivers! The kit is a great way to introduce yourself to robots and controlli...

SKU: AF-3957

The Adafruit CRICKIT HAT is a robotics and electronics driver board that plugs directly onto any Raspberry Pi with a 2×20 GPIO header. It adds motor drivers, servo outputs, capacitive touch inputs, a level-shifted NeoPixel driver, and a 3W I2S audio amplifier — all managed over I2C via the Adafru...

SKU: PI-EML-NAV2

The Navio2 Autopilot Shield for Raspberry Pi / Raspberry Pi 2 is designed both for your own custom robotic projects and as a platform for Linux version of APM (ArduPilot).Navio2 eliminates the need in multiple controllers onboard making development easier and increasing robustness.Add Wi­Fi or LT...

SKU: DF-DRI0054 · MPN: DRI0054

##Introduction The multifunctional motor driver expansion board is designed for Raspberry Pi Zero/Zero W/A+/B+/2B/3B/3B+/4B. This fully-featured robot motor expansion board is capable of supporting multiple motors, stepper motors, and servos simultaneously. It also provides spare camera and DIP d...

SKU: DF-DFR0592

The DC Motor Driver HAT is a Raspberry Pi add-on board that drives up to two DC motors via I2C. Built around the TB6612FNG motor driver chip with 1.2 A continuous current per channel (2 A peak), it supports both standard DC motors and motors with encoders through the on-board encoder interface. ...

SKU: DF-SEN0265

The Pixy2 (CMUcam5) is a fast, compact vision sensor for robotics that can detect objects, track colours, follow lines, and read small barcodes — all at 60 frames per second. Teach it to recognise objects by pressing a button, and it returns X/Y coordinates, size, and unique IDs for each detected...

SKU: LB-OWL-CHASSIS

This two-wheel robot chassis provides a ready-to-build platform for your own robotics projects. It comes with two DC motors and wheels, plus a caster wheel for balance — just add your own controller board (Arduino, Micro:bit, Raspberry Pi, or similar) and a motor driver to get moving. The transp...

SKU: WS-19358

A 10-DOF IMU sensor expansion board designed for the Raspberry Pi Pico. Combines a 9-axis ICM20948 motion sensor (gyroscope, accelerometer, magnetometer) with an LPS22HB barometric pressure sensor, all communicating over I2C. Plugs directly onto the Pico's pin header with a stackable design. Use...

SKU: PL-3753

The Pololu Dual G2 High-Power Motor Driver 24v14 is a Raspberry Pi expansion board that can independently control two brushed DC motors at up to 14A continuous per channel. It mounts directly onto the Pi's 40-pin GPIO header in the HAT form factor and includes an integrated 5V 2.5A step-down regu...

SKU: PR-PIM373

The VL53L1X Time of Flight sensor breakout uses a low-power laser to measure distances with excellent accuracy and speed. With a detection range of 4 cm to 4 metres and up to 50 Hz sampling frequency, it's ideal for proximity sensing, presence detection, and collision avoidance on robots. This b...

SKU: LB-OWL-CHASSIS-V2

Looking for a Robot Chassis?  Check out our 2 Wheel Robot Chassis.  Perfect for adding your own electronics to.  It comes with two motors which can be connected to your Arduino, Micro:Bit or Raspberry pi to get your project moving!

SKU: SB-21468

Pico Driver Motor HAT is a DC motor control module that is powered by one H-bridge IC L293D with the motor input supply range 6 V-12 V. It is designed to connect 2 DC motors simultaneously or 1 stepper motor that would help the user to make projects in a compact size with high efficiency. You ca...

SKU: PR-PIM617

A compact motor driver add-on for the Raspberry Pi Pico, based on the DRV8833 dual H-bridge. Solders directly to the back of a Pico and provides two JST-ZH connectors for micro metal gearmotors. Also includes a user button and a Qw/ST (Qwiic/STEMMA QT) connector for attaching I²C breakout boards....

SKU: YH-3000101267

Yahboom K230 vision module is a high-performance, low-power embedded AI vision processing module designed for edge computing scenarios. It is designed based on the end-side AloT chip of the RISC-V architecture, with 6TOPS equivalent computing power and 1GB RAM. It can be connected to a variety of...