All Products
Showing 1-11 of 11 products
BitScope Micro
The BitScope Micro (BS05U) is a compact, probe-sized mixed signal oscilloscope and test instrument. Despite its tiny form factor, it delivers full-featured oscilloscope, logic analyser, and waveform generator functionality — all powered over USB. Compatible with Windows, macOS, Linux, and Raspbe...
Basic Multi-Color Micro SMT Test Hooks (6-pack)
·
A six-pack of colour-coded micro SMT test hooks for probing and debugging surface-mount PCBs. Each hook features a spring-actuated double-hook tip that snaps onto components, and a solderable tab on the other end for attaching wires or leads. These hooks are designed for low-profile surface-moun...
USB Logic Analyzer - 24MHz/8-Channel
An 8-channel USB logic analyser with sampling rates up to 24 MHz, ideal for debugging UART, I2C, SPI, and other digital communication protocols. Compatible with both 3.3 V and 5 V logic levels and powered directly via the USB Type-C connection. Works with PulseView and the open-source sigrok sof...
Adafruit Feather RP2040 SCORPIO - 8 Channel NeoPixel Driver
The Feather RP2040 SCORPIO is designed specifically for driving large quantities of NeoPixels (WS2812) using the RP2040's PIO state machines. It features 8 consecutive GPIO outputs with a 3V-to-5V level shifter, allowing you to drive 8 independent NeoPixel strips simultaneously via DMA — with zer...
Adafruit USB Isolator - 100mA Isolated Low/Full Speed USB
·
The Adafruit USB Isolator provides galvanic isolation between your computer's USB port and connected devices, protecting against harmful noise, ground loops, surges, and voltage spikes. Based on Analog Devices' USB isolator technology, it supports both Low Speed (1.5 Mbps) and Full Speed (12 Mbps...
ScanaQuad Logic Analyzer Pattern Generators - SQ200
The ScanaQuad SQ200 is a 4-channel logic analyser and digital pattern generator that helps you capture, decode, and debug digital signals on your embedded systems. With 200 MHz sampling, 4 M samples per channel, and 30+ built-in protocol decoders, it handles everything from simple edge triggers t...
SparkFun microSD Sniffer
The SparkFun microSD Sniffer lets you tap into the SPI traffic between a microSD card and its host device for debugging or reverse engineering. Insert one end into a standard microSD socket and plug a microSD card into the onboard socket — all SPI signals are then broken out to an 8-pin 0.1″ pitc...
Mini Black HAT Hack3r - Fully Assembled
The Mini Black HAT Hack3r is a compact breakout board that lets you access all 40 GPIO pins on your Raspberry Pi while a HAT or pHAT is attached. It connects between your Pi and the HAT via a ribbon cable, bringing every pin out to clearly labelled headers for probing, debugging, or connecting ad...
Mini Black HAT Hack3r -Retail Pack - Fully assembled
The Mini Black HAT Hack3r is a compact breakout board that gives you full access to all Raspberry Pi GPIO pins while a HAT or pHAT is attached. Ideal for debugging HAT projects, probing signals, or combining a HAT with other circuits on a breadboard. Every GPIO pin is clearly labelled with its f...
Hook Test Lead Set - Multicoloured (5 Pack)
·
Make cleaner, more reliable test connections on the bench with this set of five hook test leads. They are handy for electrical testing and prototyping where a secure, hands-free contact point can make measurements much easier.Each lead has spring-loaded hook clips on both ends, letting you grab o...
TCS3430/TCS34303 Ambient Tri-Stimulus Colour Sensor
·
This breakout brings ambient light tri-stimulus colour sensing to your project using CIE XYZ plus an IR channel, rather than the more common RGB-style approach. It is designed for applications where you want access to the raw sensor count data so you can match and calibrate it to your own colour ...
