All Products
Showing 1-14 of 14 products
E-Textiles Student Kit
·
This kit is designed for use with the electronic textiles unit in the Exploring Computer Science (ECS, exploringcs.org) introductory computing curriculum for secondary students. It contains most of the materials needed for four e-textiles projects: paper circuit, wristband, mural, and hum...
2 x 2032 Coin Cell Battery Holder - 6V output with On/Off switch
·
A compact coin cell battery holder designed for small portable and wearable electronics projects. It holds two 20mm coin cells (CR2032 is the most common size) wired in series to provide 6V nominal output, with an on/off switch built into the top for convenient power control. The holder features...
E-Textiles Battery Holder with Switch
This E-Textiles Coin Cell Battery Holder has a small slide switch installed on the board, in-line with the power so you can shut off your project and save batteries. This slide switch is the same as is found on the LilyPad slide switch board, so it’s not easy to accidentally turn off or on....
Coin Cell Battery Holder - Switched for Lilypad - 20mm
Sure, your flashing, chip-tune playing T-shirt is really cool at the party… but at some point you need to turn it off. And yes, you could just pull the battery, or maybe you’ve even sewn a LilyPad slide switch in-line. Wouldn’t it be nice if there was just a switch on the battery? Well, look no f...
20mm Coin Cell Breakout w/On-Off Switch (CR2032)
·
A sewable breakout board with a CR2032 coin cell battery holder, built-in on/off switch, and 0.1" pitch breakout pins. The board provides two ground pins, one switched power pin, and one always-on power pin — giving you flexibility in how you manage power in your project. Also available: version...
20mm Coin Cell Breakout Board (CR2032)
·
A simple sewable breakout board with a CR2032 coin cell battery holder pre-soldered on and 0.1" pitch breakout pins for easy connection. Ideal for powering very low-current projects or adding a battery backup circuit to a real-time clock or similar module. Key Features CR2032 Coin Cell Holder ...
Coin Cell Battery - 20mm (CR2032)
CR2032 Lithium metal 3V 250mAh button cell battery. Great for powering low power processors or blink an LED for weeks at a time. Note: This item is non-returnable. If this item arrives damaged or is not functioning properly, please do not hesitate to contact us to see if further actions may be ta...
Coin Cell Battery - 20mm (CR2025)
The CR2025 is a 20mm lithium coin cell battery rated at 3V with a 165 mAh capacity. At just 2.5mm thick, it's 0.7mm thinner than the more common CR2032, making it ideal for applications where space is at a premium. A reliable choice for remote controls, calculators, key fobs, and other compact e...
Sewable CR2032 Battery Holder
A sewable coin cell battery holder designed for wearable electronics projects. The metal tabs have small 1mm holes that accommodate a #5 or smaller needle, making it easy to sew directly onto fabric with conductive thread. The holder accepts standard CR2032 lithium coin cells (3V, ~200mAh), whic...
Sewable CR2032 Battery Holder
·
This sewable CR2032 battery holder makes it easy to add power to wearable electronics projects. Two small 1mm holes in the metal connection tabs are perfectly sized for a #5 or smaller needle to pass through, so you can stitch it directly onto fabric with conductive thread. One tab connects to g...
Coin Cell Battery Holder - 20mm (PTH)
Basic 20mm coin cell holder. Posts can be inserted into 0.1" perf board! Holds the common CR2032 type batteries.
CR2016 Lithium Coin Cell Battery
·
This is a handy little non-rechargeable CR2016 Lithium Coin Cell Battery!Sitting at 20mm diameter and is 1.6mm thick it's small but packs a punch with a nominal voltage output of 3V and a capacity of 90mAh. For other drain rates the capacity may be reduced, check the datasheet! Note that these ar...
Coin Cell Battery Holder - 20mm
A 20 mm coin cell battery holder designed for CR2032 batteries. The holder features a pop-in, pop-out mechanism for easy battery changes, and the mounting feet include small holes for sewing onto fabric — making it suitable for e-textile and wearable electronics projects as well as standard PCB u...
Coin Cell Battery Holder - 20mm (SMD)
Now for all of your coin cell battery surface mount needs, the 20mm SMD Coin Cell Holder. This holder fits our 20mm Lithium Ion coin cell battery and holds the battery in place with friction. The metal housing connects to the positive (+) side of the battery and the PCB pad underneath is connecte...
