All Products

SKU: AF-411

A small adapter that converts a standard 5.5 / 2.1 mm DC barrel plug into a 4.0 / 1.7 mm plug, letting you use common 2.1 mm wall adapters with devices that have a smaller 1.7 mm DC jack input. Key Features 2.1 mm Jack Input – Accepts standard 5.5 / 2.1 mm barrel plugs 1.7 mm Plug Output – Fi...

SKU: AF-5474

A comprehensive set of 30 barrel jack plug adapters that convert a standard 5.5mm / 2.1mm DC jack to a wide variety of other tip sizes. Perfect for powering devices that use non-standard barrel connectors from your existing DC power supplies, USB-C to DC cables, or battery packs. Each adapter pl...

SKU: AF-6033 · MPN: ADA6033

This handy adapter lets you power compatible gear with a 5.5mm / 2.1mm DC barrel socket from a USB-C PD source. It is useful when you want to use a modern USB-C power supply with equipment that expects a standard barrel jack input.Because USB-C is reversible, the adapter can be flipped around to ...

SKU: PI-ADP010

A handy adapter that converts a 2.1 mm DC barrel jack (female socket) into a screw terminal block. Plug a wall adapter or barrel-plug cable into the jack end, and access the power lines via labelled +/− screw terminals on the other — no soldering required. Key Features 2.1 mm DC Barrel Jack – ...

SKU: AF-3546

A passive adapter with a 1st-generation MagSafe plug on one end and a 5.5 mm / 2.1 mm DC barrel jack (centre-positive) on the other. It lets you connect a 15–20 VDC barrel-jack power supply to devices that use the original MagSafe connector — useful for bench testing, custom power setups, or repl...

SKU: AF-2788

A DC barrel jack adapter cable that converts a 3.5/1.3 mm or 3.8/1.1 mm DC plug to the standard 5.5/2.1 mm DC barrel jack format. Internal spring contacts accommodate outer diameters from 3.5 mm to 3.8 mm, making it versatile across a range of small-barrel DC connectors. Key Features Wide Comp...

SKU: PI-ADP011

A handy adapter that converts bare wire connections into a standard 2.1 mm DC barrel plug. Strip your battery pack or power supply wires, secure them in the screw terminals, and plug straight into any board or device with a 2.1 mm barrel jack input — no soldering required. Key Features 2.1 mm ...

SKU: AF-390

This versatile LiIon/LiPo battery charger accepts power from three sources: a 6 V solar panel (via 2.1 mm DC jack), USB Mini-B, or a 5 V DC adapter. It features automatic charging current tracking that draws the maximum possible current from a solar panel in any light condition, providing near-MP...

SKU: AF-1351

A simple 2-way DC barrel jack splitter that lets you power two devices from a single power adapter. Plug in one standard 5.5mm/2.1mm DC barrel jack and get two identical outputs — perfect for powering multiple boards or accessories from a single supply. Key Features 1-to-2 Splitter – One DC ba...

SKU: DF-DFR0491

The Gravity IO Expansion Shield breaks out all GPIO pins from the LattePanda into Gravity-compatible 3-pin colour-coded connectors, providing plug-and-play access to hundreds of Gravity sensors and modules. Each pin includes VCC and GND, eliminating the need for separate power wiring. The shield...

SKU: DF-FIT0151

A screw-terminal adapter that converts a 5.5 × 2.1 mm centre-positive DC barrel jack connection to bare wire terminals. Plug in a barrel jack power supply on one end and connect the screw terminals to a breadboard, circuit, or project on the other — a simple way to add a standard DC power input w...

SKU: AF-988

This little dongle will let you connect one of our 5V 2Amp or 5V 10Amp adapters to something that expects to connect to USB. The premise is simple - one end has a USB A female jack and the other has a 'standard' 5.5mm OD/2.1mm ID barrel jack with center positive polarity. It does not have any...

SKU: AF-1328

Turn any 2.1 mm barrel-jack wall adapter into a handy bench power supply with this adapter cable. The moulded DC barrel jack connects to your power supply, while colour-coded alligator clips (red for centre-positive, black for ring-negative) let you quickly clip onto bare wires, terminals, or tes...

SKU: PL-2449

This connector adapts a 5.5 × 2.1 mm DC barrel jack to a pair of screw terminals spaced approximately 5 mm (0.2″) apart. The terminals are labeled positive and negative, with the positive terminal connected to the center pin.

SKU: DF-FIT0784

A DC 5.5×2.1mm female to USB Type-C male power adapter plug, allowing you to power USB-C devices from a DC barrel jack power supply. Useful for powering Raspberry Pi 4/5, LattePanda, and other USB-C-powered boards from existing DC supplies. Also available in a Micro-USB version. Specifications ...

SKU: AF-368

A simple adapter that converts a 2.1 mm DC barrel jack to screw terminals, making it easy to connect a DC power supply to boards or projects that lack a DC jack. The terminals are labelled with positive and negative polarity, assuming a centre-positive configuration (the most common type). Key F...

SKU: AF-4536

A simple adapter that converts a standard 2.1 mm DC barrel jack into a USB-C plug, letting you power USB-C devices from common 5 V barrel-jack wall adapters. Plug it onto the end of your existing power supply and connect straight to a Raspberry Pi 4 or any USB-C device that runs on 5 V without US...

SKU: AF-5501

A re-programmable USB Type-C Power Delivery (PD) cable that converts any PD-capable USB-C power adapter into a configurable DC barrel jack output. Programme the built-in PD sink negotiation chip to request 5 V, 7 V, 9 V, 10 V, 12 V, 15 V, or 20 V at up to 2 A — replacing the need for multiple wal...

SKU: AF-2727

This adapter cable converts a 5.5mm/2.1mm DC barrel jack power supply to a Micro USB plug, allowing you to power Micro USB devices from a standard barrel jack power adapter. The barrel jack end is centre-positive polarity. It works great for powering Arduinos, BeagleBones, Raspberry Pis, Android...

SKU: AF-1329

Connect a battery pack or bare wires to any device with a 2.1 mm DC barrel jack input using this adapter cable. Colour-coded alligator clips (red for centre-positive, black for ring-negative) clip onto battery terminals or exposed wires, while the moulded 2.1 mm barrel plug feeds power straight i...