All Products

SKU: AF-3321

The Adafruit Mini Color TFT with Joystick FeatherWing adds a vibrant 0.96" colour display and a complete user interface to any Feather board. The 160×80 pixel TFT display supports 16-bit full colour, and the built-in 5-way navigation joystick plus two push buttons give you everything needed to bu...

SKU: AF-4415

The Adafruit Mini GPS PA1010D is a compact 25×25 mm GPS/GNSS breakout with a built-in patch antenna, dual UART and I2C interfaces, and STEMMA QT connectors for solderless plug-and-play use. Powered by the MTK3333 chipset, it supports GPS, GLONASS, Galileo, and QZSS satellite systems with up to 10...

SKU: AF-5743

The Adafruit Mini I2C Gamepad is a compact controller breakout with a 2-axis thumb joystick and 6 momentary buttons (4 large, 2 small), all communicating over I2C via the seesaw co-processor. It doesn't use any of your GPIO or analogue pins — just connect via STEMMA QT / Qwiic and start reading i...

SKU: AF-1905

The Adafruit Mini Lipo with Mini-B USB Jack is a compact charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Plug in any Mini USB cable to a USB power source and connect your battery via the JST connector — two LEDs show status at a glance (red = charging, gr...

SKU: AF-4484

The Adafruit Mini PiTFT 1.3" is a compact 240×240 pixel IPS colour display that snaps directly onto any Raspberry Pi via the GPIO header. With vibrant colours and excellent viewing angles, it's ideal for adding a user interface, status readout, or visual feedback to headless Pi projects. The dis...

SKU: AF-4393

The Adafruit Mini PiTFT 1.14" is a compact 135×240 pixel IPS colour display that snaps directly onto any Raspberry Pi via the GPIO header. Its slim widescreen format is perfect for status bars, scrolling text, or compact dashboards on headless Pi projects. The display communicates over SPI for f...

SKU: AF-2923

The Adafruit Latching Mini Relay FeatherWing lets you control mains-powered devices and small appliances using any Feather microcontroller. Switch lamps, fans, solenoids, and other loads rated up to 250 VAC or DC — all from a compact FeatherWing form factor. This is the latching version, which u...

SKU: AF-2895

The Adafruit Non-Latching Mini Relay FeatherWing lets you control mains-powered devices and small appliances using any Feather microcontroller. Switch lamps, fans, solenoids, and other loads rated up to 250 VAC or DC — all from a compact FeatherWing form factor. This is the non-latching version,...

SKU: AF-2970

The Mini Skinny NeoPixel strip packs 144 individually addressable RGB LEDs into just one metre, with an ultra-narrow 7.5 mm wide flexible PCB. This is the black PCB version — identical specs to the white variant, just with a different-coloured flex strip for a more discreet look. Each LED is con...

SKU: AF-2969

The Mini Skinny NeoPixel strip packs 144 individually addressable RGB LEDs into just one metre, with an ultra-narrow 7.5 mm wide flexible PCB. This is the white PCB version — identical specs to the black PCB variant, just with a different-coloured flex strip for a brighter, more visible look. Ea...

SKU: AF-2963

The Mini Skinny NeoPixel strip packs 60 individually addressable RGB LEDs into one metre, with an ultra-narrow 7.5 mm wide flexible PCB (5 mm without casing). This is the white PCB, 60 LED/m version — a lower-density option that's easier to power and ideal for projects where pixel spacing isn't c...

SKU: AF-2954

The Mini Skinny NeoPixel strip features 30 individually addressable RGB LEDs per metre on an ultra-narrow 7.5 mm wide flexible PCB (5 mm without casing). This is the black PCB version — the lowest density option in the Mini Skinny range, ideal for longer runs where power efficiency and wider pixe...

SKU: AF-2949

The Mini Skinny NeoPixel strip features 30 individually addressable RGB LEDs per metre on an ultra-narrow 7.5 mm wide flexible PCB (5 mm without casing). This is the white PCB version — identical specs to the black PCB variant, just with a different-coloured flex strip for a brighter, more visibl...

SKU: AF-2964

The Mini Skinny NeoPixel strip features 60 individually addressable RGB LEDs per metre on an ultra-narrow 7.5 mm wide flexible PCB (5 mm without casing). This is the black PCB version — identical specs to the white PCB variant, just with a different-coloured flex strip for a more discreet look. ...

SKU: AF-2959

The Mini Skinny NeoPixel strip features 60 individually addressable RGB LEDs per metre on an ultra-narrow 7.5 mm wide flexible PCB (5 mm without casing). This is the white PCB version — identical specs to the black PCB variant, just with a different-coloured flex strip for a brighter, more visibl...

SKU: AF-4913

The Adafruit Mini Skinny NeoPixel LED Strip in Warm White 3000K combines full RGB colour with a dedicated warm white LED element in each pixel. With 60 RGBW LEDs per metre on a flexible black PCB, it delivers vibrant colours and a natural warm glow — perfect for ambient lighting where pure white ...

SKU: AF-4914

The Adafruit Mini Skinny NeoPixel RGBW LED Strip in Cool White 6500K combines full RGB colour with a dedicated cool white LED element in each pixel. With 60 RGBW LEDs per metre on a flexible black PCB, it delivers vibrant colours and a crisp daylight-white glow — perfect for task lighting and pro...

SKU: AF-4469

The Adafruit MLX90640 IR Thermal Camera Breakout features a 24×32 array of infrared thermal sensors that returns 768 individual temperature readings over I2C. It's an affordable way to add heat-vision to any microcontroller or Raspberry Pi project — like a miniature thermal camera you can integra...

SKU: AF-4407

The Adafruit MLX90640 IR Thermal Camera Breakout features a 24×32 array of infrared thermal sensors that returns 768 individual temperature readings over I2C. It's an affordable way to add heat-vision to any microcontroller or Raspberry Pi project — like a miniature thermal camera you can integra...

SKU: AF-2130

The Adafruit Mono 2.5W Class D Audio Amplifier delivers powerful sound from a tiny package. Based on the PAM8302 chip, it drives 4–8 ohm speakers at up to 2.5 W with over 90% efficiency — making it ideal for portable and battery-powered audio projects. A significant upgrade over basic LM386-based...