All Products

SKU: SF-PRT-13925

These headers are made to work with the Teensy 3.2 and Teensy LC development boards. Each kit of headers makes your Teensy breadboard compatible and will allow for stacking a Teensy and Teensy-compatible shield board. This kit includes five headers (two 13-pin, one 7-pin, one 3-pin, and one 2x...

SKU: SF-KIT-28374 · MPN: KIT-28374

Add 16-bit stereo audio output to a Teensy project with this DIY audio adapter kit built around the PT8211 digital-to-analogue converter (DAC). It is designed as a clean, high-fidelity sound source for audio-based builds using the Teensy Audio Library.The adapter provides a true stereo, line-leve...

SKU: SF-PRT-17152

These headers are made to work with the Teensy 4.1, Teensy 3.6, and Teensy 3.5 development boards. Each set of headers allows for your Teensy to be easily incorporated into a breadboard circuit or attach a shield on top of the board. This kit includes three headers (two 24-pin, and one 5-pin), en...

SKU: SF-KIT-15716 · MPN: KIT-15716

This passive adapter lets a Teensy development board connect to the standard Arduino 1.0 (R3) shield footprint, making it easier to reuse existing Arduino shields without a breadboard full of jumper wires.Solder your Teensy board, sold separately, to the marked footprint on the adapter, then plug...

SKU: LW-TEK7

Red Heart-shaped sewable LED board.  Product Details• Add light up LED Hearts to your crafts• LED light is Pink• Pack Includes 4x LED Hearts• Recommended Age 8+

SKU: LW-TEK6

Teknikio Blue star-shaped sewable LED board.  Product Details• Add light up LED Stars to your crafts• LED light is blue• Pack Includes 4x LED Stars• Recommended Age 8+

SKU: PI-CAM002

Get in close with this telephoto lens, an excellent accessory for the Raspberry Pi Camera module. With a whopping 12x magnification and a sturdy clip to hold your camera board securely this lovely lens means that you no longer need to be right on top of your subject to get great phot...

SKU: SF-WRL-13982

This ANT700 is a telescopic antenna designed for operation from 300 MHz to 1.1 GHz with a total length that is configurable from 9.5 cm to 24.5 cm. Each ANT700 is constructed of stainless steel and features an SMA male connector, rotating shaft, and adjustable elbow. The ANT700 is a 50 Ohm anten...

SKU: SF-WRL-13002

This ANT500 is a telescopic antenna designed for operation from 75 MHz to 1 GHz with a total length that is configurable from 20 cm to 88 cm long. Each ANT500 is constructed of stainless steel and features an SMA male connector, rotating shaft, and adjustable elbow. The ANT500 is a 50 ohm antenn...

SKU: SF-GPS-25795

The SparkFun telescoping pole is perfect for GNSS projects that require mobility and ease of use. Get your point heights dialed in to the millimeter! This lightweight carbon fiber pole weighs less than 2.1 lbs (1.0kg) and can be extended from 1.3 to 2.2m. The 5/8" 11-TPI industry standard threade...

SKU: LB-LR0029

DHT11 Temperature and Humidity sensor is as powerful as it used to be but easier to use.  This  DHT11 Arduino temperature and humidity sensor has a full range temperature compensation, low power consumption, long term stability and calibrated digital signal. A high-performance 8-bit mi...

SKU: LB-LR0010

Digital TempTemperature sensing module using an NTC thermistor. The output signal at ‘DO’ switches high when the preset (adjustable) temperature is reached. An analog output signal from the sensor is available at pin ‘AO’

SKU: EC-P3D0107PT

The polyimide tape is an insulator resistant to high temperatures.It is an essential accessory for assembly and use of your 3D printer.Tape with polyimide film as the backing material coated high temperature resistant silicone, color is dark brown (amber), tape good stickiness, good docile, hi...

SKU: SF-SEN-18367

A sealed, waterproof DS18B20 digital temperature probe for precise measurements in wet or harsh environments. The sensor communicates over a 1-Wire interface, requiring just one data pin (plus ground) to connect to your microcontroller. It can even be parasitically powered from the data line. Ea...

SKU: LB-24-TEMP

A pre-wired DS18B20 digital temperature sensor on a breakout module with three labelled pins for easy connection. The DS18B20 uses the 1-Wire protocol, requiring only a single data line to communicate temperature readings to a microcontroller such as a Raspberry Pi, Arduino, or micro:bit. Key Fe...

SKU: PI-COM1701

The TMP36 is a low voltage, precision centigrade temperature sensor. It provides a voltage output that is linearly proportional to the Celsius temperature. It also doesn’t require any external calibration to provide typical accuracies of ±1°C at +25°C and ±2°C over the −40°C to +125°C temperature...

SKU: SF-SEN-10988

This is the same temperature sensor that is included in our SparkFun Inventor’s Kit. The TMP36 is a low voltage, precision centigrade temperature sensor. It provides a voltage output that is linearly proportional to the Celsius temperature. It also doesn’t require any external calibration to prov...

SKU: SF-SEN-11050

This sealed digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface. The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a centra...

SKU: SF-TOL-14457

The 4-Bay T4s Intelligent Universal Charger from Tenergy is an automatic smart charger compatible with almost all types of rechargeable batteries, thereby eliminating the need to own multiple chargers. Capable of automatically identifying and charging Lithium Ion (Li-ion), LiFePO4, NiMH and NiCD ...

SKU: AF-4317 · MPN: 4317

Machine learning has come to the 'edge' - small microcontrollers that can run a very miniature version of TensorFlow Lite to do ML computations. But you don't need super complex hardware to start developing your own TensorFlow models! We've curated a simple kit to dip your toes into machine ...