All Products

SKU: EC-CIA55000W

This NIREN W5500 is a Ethernet module that basic on the new type chip W5500, The W5500 chip is a Hardwired TCP/IP embedded Ethernet controller that enables easier internet connection for embedded systems using SPI (Serial Peripheral Interface). W5500 suits users in need of stable internet conn...

SKU: DF-DFR0342

W5500 Ethernet with POE Mainboard is a new member in our Ethernet family. It is based on the ATmega32u4 and W5500 Ethernet chip, which is quite useful to most IOT projects. W5500 chip is a Hardwired TCP/IP embedded Ethernet chip that provides easier Internet connection to embedded systems. It en...

SKU: LB-LS1372

WAGO's 221 Series COMPACT Splicing Connector for all wire types saves 40% more space than its predecessor (222 series).These wire connectors accommodate fine-stranded wires from 0.14 to 4 mm2 (24–12 AWG), as well as solid and stranded wires from 0.2 to 4 mm2 (24–12 AWG). This wide range allows yo...

SKU: LB-LS1373

WAGO's 221 Series COMPACT Splicing Connector for all wire types saves 40% more space than its predecessor (222 series). These wire connectors accommodate fine-stranded wires from 0.14 to 4 mm2 (24–12 AWG), as well as solid and stranded wires from 0.2 to 4 mm2 (24–12 AWG). This wide range allo...

SKU: LB-LS1374

WAGO's 221 Series COMPACT Splicing Connector for all wire types saves 40% more space than its predecessor (222 series).These wire connectors accommodate fine-stranded wires from 0.14 to 4 mm2 (24–12 AWG), as well as solid and stranded wires from 0.2 to 4 mm2 (24–12 AWG). This wide range allows yo...

SKU: DF-FIT0231

High quality switching 'wall wart' 'wall adapter' AC to DC 12V 1A wall power supply. These are switch mode power supplies which mean the output is regulated to 12V(no more 14V outputs!). They take 100-240Vac 50/60Hz input and output 12V 1A. These will power most projects that don't require more ...

SKU: SF-TOL-13831

This is a high-quality switching ‘wall wart’ AC to DC 5.1V 2,500mA USB Micro-B wall power supply manufactured specifically for projects that require a higher level of power. This compact USB AC charger is UL and CSA listed and incorporates a highly regulated output switching power design to as...

SKU: DF-FIT0253

A 7.5 V DC wall adapter power supply with a DC 2.1 mm barrel connector, compatible with the Arduino power jack. The 7.5 V output is well suited for Arduino projects that need more than 5 V but where 12 V may be excessive — ideal for motor or servo applications that require a reliable mid-range vo...

SKU: LB-LS7938

A reliable and ultra-quiet solution designed for precision timekeeping and easy installation. Perfect for DIY clock builds or replacing faulty mechanisms, this unit combines accuracy, durability, and silent operation.Features:Silent Sweep Operation: Enjoy noise-free performance with smooth, conti...

SKU: PH-105480

Mount your Raspberry Pi camera case to a wall or ceiling with this adjustable bracket. The tilt and swivel mechanism lets you position your camera at just the right angle, then lock it in place with thumbscrews — ideal for building a flexible monitoring or security camera system. The bracket sup...

SKU: DF-SEN0454

A relay-output water leak detector with NO/NC (normally open/normally closed) switching. When water contacts the two sensing probes, the built-in relay triggers — suitable for activating alarms or shutting off equipment. The low control circuit potential ensures safe operation around combustible ...

SKU: AF-770

Keep your power source safe and toasty in these waterproof 2xAA battery holders. They're just like classic switched battery holders, but designed for survival! The case has a rubber gasket around the edge of the case (its black and hard to see in the photos but it is there) and attaches togeth...

SKU: LB-LS3685-COOL

This LED light strip in Cool White is perfect for adding a touch of light and style to your home. It comes with a motion sensor control box that turns the lights on and off automatically, and has three brightness settings to choose from. The strip is made of waterproof and flexible material, m...

SKU: LB-LS3685-WARM

A battery-powered, motion-activated LED strip for instant, no-wiring lighting anywhere in your home. The built-in PIR motion sensor automatically turns the strip on when movement is detected and off again when the area is clear — ideal for cupboards, shelving, under-bed lighting, hallways, and st...

SKU: AF-771

Keep your power source safe and toasty in these waterproof 3xAA battery holders. They're just like classic switched battery holders, but designed for survival! The case has a rubber gasket around the edge of the case (its black and hard to see in the photos but it is there) and attaches togeth...

SKU: DF-FIT0727

Waterproof is always a critical point for outdoor projects, and when you need to drill holes on a project enclosure to lead out the wires, it will be very likely to cause the waterproof problem. Now no more worries, we have this Waterproof Cable Gland just right for you!These Cable Glands offer I...

SKU: TB-SK0970

Push-on, clear plastic cap for mini rocker switches.Suits switches SK-0984, SK-0985, SK-0987. Specifications Switch Type Switch Cover Length 36.5mm Width ...

SKU: AF-743

Outdoor enthusiasts rejoice! We now have standard 5.5/2.1mm DC power cable sets in a waterproof variety. These cable sets are ideal for projects that must weather the weather: dust, water, rain, snow, tornado (not volcano proof!). They are a little bulkier than normal DC jacks because of the o-ri...

SKU: AF-381

This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC so we suggest keeping it under 100°C. Because they are digital, you don't get an...

SKU: DF-DFR0198

This is a waterproofed version of the DS18B20 Temperature sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC so we suggest keeping it under 100°C. Because they are digital, you don't get ...