All Products

SKU: AF-5989 · MPN: ADA5989

The Adafruit HDC3021 is a high-precision I²C temperature and humidity sensor breakout featuring the TI HDC302x series chip. With typical humidity accuracy of ±0.5% RH (and just 0.19% long-term drift) and temperature accuracy of ±0.1°C, it's one of the most accurate environmental sensors available...

SKU: AF-5991 · MPN: ADA5991

The Adafruit USB Type C Power Delivery Dummy (I2C or Switchable) lets you tap into USB-C Power Delivery to get 5V, 9V, 12V, 15V, 18V, or 20V from any compatible USB-C charger or wall adapter — no soldering required. Built around the HUSB238 PDL003A E-Marker variant, it can request up to 5A for a ...

SKU: AF-6174 · MPN: ADA6174

The Adafruit Sensirion SHT45 is the highest-accuracy sensor in the SHT4x family, delivering ±1.0% typical relative humidity accuracy and ±0.1 °C typical temperature accuracy. Featuring a PTFE membrane for protection against dust and water ingress, it's built for demanding environments and precisi...

SKU: WS-30697 · MPN: 30697

ESP32-S3 2.1inch Capacitive Touch Round Display Development BoardUnleash Your Creativity with Cutting-Edge TechnologyUnveiling the ultimate tool for innovators, the ESP32-S3 Round Display Development Board – your perfect companion for designing and prototyping next-gen smart devices. Dive into th...

SKU: AF-1646 · MPN: 1646

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) or Raspberry Pi Display for a different size. Works great, just carefully open the connector on the Pi and slip this one in.This cable is 100mm long We have cables in 50mm...

SKU: PH-106004

Looking for an M.2 HAT for your Raspberry Pi 5 that fits within the official Raspberry Pi 5 case? So were we! That’s why we worked on the Pineboards HatDrive! Nano so that you don’t have to leave your poor Pi exposed to the world.Supporting both M.2 2230 and M.2 2242 form factor devices with an M...

SKU: SF-WRL-17841

A compact wide-band internal antenna covering 700–2700 MHz, suitable for 4G LTE, LoRa, BLE, and other RF applications. The FPC radiator element connects via a 100mm coaxial cable with an IPEX (u.FL equivalent) connector, and 3M adhesive backing makes it easy to mount inside enclosures and project...

SKU: AF-5880 · MPN: ADA5880

The Adafruit I2C STEMMA QT Rotary Encoder Breakout comes with a 24-detent rotary encoder with push-switch pre-soldered, so you can start twisting right away. An onboard microcontroller running Adafruit's seesaw firmware handles all pulse tracking, debouncing, and pin management — simply read enco...

SKU: LB-1601104

USB C to 3.5mm Audio Headphone Jack DAC Adapter OverviewThe USB C to 3.5mm Audio Headphone Jack DAC Adapter is your go-to solution for connecting traditional 3.5mm audio devices to modern USB-C devices without a headphone jack. Whether you're listening to music, taking calls, or using your favori...

SKU: AF-5239 · MPN: 5239

Connect this to that when a 18-pin FPC connector is needed. This 25 cm long cable is made of a flexible PCB. It's A-B style which means that pin one on one side will match with pin one on the other side. How handy! We're stocking this to fit with our EYESPI-compatible boards but you could of cou...

SKU: SF-CAB-25596

With the SparkFun Qwiic Connect System expanding every day, we want to make sure it becomes as accessible as possible but we understand there are other systems that can compliment it out there. The Qwiic to STEMMA Adapter Cable allows interoperability between the SparkFun Qwiic Connect System and...

SKU: SF-CAB-28768 · MPN: CAB-28768

With the SparkFun Qwiic Connect System expanding every day, we want to make sure it becomes as accessible as possible but we understand there are other systems that can compliment it out there. The Qwiic to Gravity Adapter Cable allows interoperability between the SparkFun Qwiic Connect Syste...

SKU: SF-GPS-14414

The SparkFun XA1110 GPS Breakout is a small I2C-supported module built for easy hookup, thanks to our Qwiic Connect System. Equipped with the XA1110 GPS module from GTOP, this board utilizes the MediaTek MT3333 chipset, loaded with specialized SparkFun firmware that enables both I2C and serial p...

SKU: AF-4750 · MPN: 4750

Secure your project with biometrics - this adorably tiny, all-in-one, optical fingerprint sensor will make adding fingerprint detection and verification super simple. It's extremely slim, with a plastic casing that can be glued or panel mounted into any enclosure! There are some embedded blue LED...

SKU: AF-5384 · MPN: 5384

This 300 mm (11.8") 4-wire cable is fitted with JST-SH female 4-pin connectors on both ends. The 1 mm pitch JST-SH connectors are more compact than the chunkier 2 mm pitch JST-PH, while still providing a secure latching connection that is easy to insert and remove. Compatible with both STEMMA QT...

SKU: WS-25288

Long-wave IR Thermal Imaging Camera Module, 80×62 Pixels, 45°FOV, Available with 40PIN GPIO Header or Type-C PortLong-wave IR Thermal Imaging Camera Module 80×62 Pixels IR Array  Small Size | Non-contact | Motion Detection Features at a glance This is a long-wave IR ...

SKU: AF-4208 · MPN: 4208

A 10-pack of JST SH 4-pin right-angle connectors with 1 mm pitch through-hole mounting tabs. These are the standard connectors used with the Qwiic and STEMMA QT ecosystems, making it easy to add I2C connectivity to your own PCB designs. The solid plastic housing accepts standard Qwiic cables, an...

SKU: AF-5385 · MPN: 5385

This 4-wire cable is a little over 400mm / 15.7" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove. This cable can be used with Qwiic bo...

SKU: AF-4399 · MPN: 4399

This 4-wire cable is 50mm / 1.9" long and fitted with JST SH female 4-pin connectors on both ends. Compared with the chunkier JST PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove. This cable can be used with Qwiic or STEMMA ...

SKU: AF-4397 · MPN: 4397

This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium female headers on the other. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove.Th...