All Products
AI Overview
Pimoroni makes some of the best Raspberry Pi and RP2350 add-ons—here are the most relevant picks from your search, with the key compatibility up front.
RP2350 boards & kits (Pimoroni)
- Pimoroni Pico Plus 2 ($30.80) — RP2350-based Pico-style board with 16MB flash, 8MB PSRAM, USB‑C, and Qw/ST.
- Pimoroni Pico Plus 2 W ($40.15) — adds 2.4GHz Wi‑Fi + Bluetooth to the Pico Plus 2, plus 16MB flash/8MB PSRAM, USB‑C, Qw/ST.
- PGA2350 ($18.50) — compact RP2350B breakout in PGA format with lots of exposed pins for advanced builds.
- Pimoroni Explorer ($64.70) — RP2350 “physical computing playground” with 2.8" LCD, speaker, and mini breadboard built in.
Displays & interaction
- Pimoroni Presto - board only ($122.55) — RP2350 desktop companion with 4" square IPS touchscreen, aluminium stand, and RGB backlighting.
- Pico Display Pack 2.8" ($49.35) — add-on for Raspberry Pi Pico / Pico W, featuring a 320×240 2.8" IPS, 4 buttons, RGB LED, and Qw/ST.
LED matrix driving
- Interstate 75 W (RP2350) - RGB LED Matrix Driver ($29.85) — RP2350 controller for HUB75 RGB LED matrix panels.
Raspberry Pi 5 storage
- NVMe Base for Raspberry Pi 5 ($32.90) — adds PCIe NVMe storage to Raspberry Pi 5, supporting M‑key 2230–2280 SSDs.
Build kits
- Picade – 8-inch display ($363.75) — build-your-own Raspberry Pi mini arcade with authentic controls and a 4:3 high‑resolution display.
- Badgeware Badger - Badge + STEM Kit ($149.00) — wearable badge kit built around a 2.7" 4‑level greyscale e‑paper display in a robust case.
Which Pimoroni product type are you looking for?
Collections
Showing 81-100 of 100 products
Sewable Motionboard (Vibrating Motor)
A tiny, vibrating motor, easily attachable to paper or fabric! Just connect 3-5V across it, polarity doesn't matter, and it'll BUUUUZZZZZZ!!! The voltage (and hence current) supplied from LIR2032 rechargeable coin cell batteries may damage the Teknikio LED boards, so please ONLY...
Shift Register 8-Bit - 74HC595
The 74HC595 is an 8-bit serial-in, parallel-out shift register with a storage register and tri-state outputs. Clock in data serially and latch it to the output pins, freeing up I/O on your microcontroller. Multiple registers can be daisy-chained for even more outputs. One of the most commonly us...
Simon:Says for micro:bit
This is a Simon:Says board for the micro:bit. With this board you can create your own Simon Says game by programming the micro:bit.We provide a simple example should you require it or why not jump in and make one from scratch? What about a two player version using the micro:bit radio functio...
Soldering Tip Cleaner
Soldering irons work best if they're clean!This tip cleaner, made of low abrasive brass shavings, won't drop your irons temperature like normal sponges or damage the tip.With an anti-slip pad on the base it won't move around you workbench, and being made of brass it also won't rust.This cleaner m...
SPDT Mini Power Switch
Simple SPDT slide switch. Rated at 30V/200mA. The pins have .1" spacing - fits great into a breadboard! Use it as a power switch or general control switch.Documents:Dimensional Drawing
Speaker for micro:bit
The MonkMakes Speaker for micro:bit is a compact, amplified speaker that connects to your micro:bit using alligator clips. It's the easiest way to add sound output to your micro:bit projects — just clip on and start coding. With built-in amplification, reverse polarity protection, and an LED pow...
The XL741 Discrete Op-Amp Kit
Build a working transistor-scale replica of the classic and ubiquitous analog workhorse. The "XL741" Discrete Operational Amplifier kit from Evil Mad Scientist Laboratories is a faithful and functional transistor-scale replica of the μA741 op-amp integrated circuit, the classic and ubiquitous ana...
The Three Fives Kit: A Discrete 555 Timer
Re-create one of the most iconic chips in electronics history. The Three Fives Kit from Evil Mad Scientist Laboratories is a faithful, functional transistor-scale replica of the classic NE555 timer IC — built up from individual resistors, 2N3904 and 2N3906 transistors on an oversized PCB shaped l...
Transistor (pack of 5) - PNP
Transistor are a type of electronic switch used for controlling the flow of a circuit and amplifying signals.They have three legs: the base, the collector, and the emitter.NPN: When a voltage is applied to the base leg of the transistor it allows current to flow from the collector to the emitter....
USB to microUSB OTG Converter Shim
The USB to microUSB OTG Converter Shim is a tiny adapter that slides inside a full-sized USB-A male connector, converting it into a USB On-The-Go (OTG) compatible microUSB connection. It provides a compact, cable-free way to connect a single USB peripheral directly to a Raspberry Pi Zero or other...
Wide Input SHIM - 1.5m long power cable
Power your Pi with a wide range of input voltages from 3 to 16V!If you need a longer power cable to go with your Wide Input SHIM this is the product for you. This is a 1.5m long 3.5mm OD male to tinned wires cable.
Picade X HAT USB-C
The Picade X HAT turns your Raspberry Pi into a retro arcade console by adding joystick and button inputs, a 3 W I2S DAC/amplifier for audio, and a safe power on/off system — all through a single HAT that powers your Pi via USB-C (no separate power supply needed). Female Dupont connectors make w...
Unicorn HAT Mini
The Unicorn HAT Mini is a compact 17×7 RGB LED matrix for Raspberry Pi, featuring 119 individually controllable LEDs and four tactile buttons. Simply pop it onto any 40-pin Raspberry Pi — no soldering required — and use the Python library to display animations, scrolling text, simple images, and ...
Arduino Uno Rev3
The board everybody gets started with, with the ATmega328 (SMD). It has 14 digital IO pins (6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, and more. The Arduino Uno SMD R3 is a microcontroller board based on the ATmeg...
Tiny 2350
·
The Tiny 2350 is a postage-stamp-sized development board powered by the RP2350A — a dual ARM Cortex-M33 running at up to 150 MHz with 520 KB SRAM and 4 MB of QSPI flash. It's programmable via USB-C with C/C++ or MicroPython and compatible with Raspberry Pi Pico 2 firmware. Castellated pads allow...
Plasma 2350
·
An all-in-one, USB-C powered controller for WS2812/Neopixel and APA102/Dotstar addressable LED strips.Plasma 2350 is powered and programmable by USB-C and, because USB-C is capable of drawing up to 3A of power, that's enough to power a healthy chunk of LEDs. There's a useful button that you could...
PCIe Flex Cable for NVMe Base and Raspberry Pi 5
·
These cables provide flexible options for connecting and positioning your NVMe Base or NVMe Base Duo.They feature a ‘one-way’ design, with 16 pads on the Raspberry Pi 5 end and 18 pins on the NVMe Base end, ensuring correct installation.Designed for PCIe Gen 3 speeds, they also support Gen 2 reli...
Tiny FX W - Wireless LED Effects Controller
·
Add smart light and sound effects to models and dioramas with this small-but-mighty RP2040-powered programmable controller board - now with wireless connectivity!Tiny FX W is an effects controller for the LED dots and strips that can be found in third-party LEGO®-compatible lighting kits. These L...
Pibow Frame for Raspberry Pi Touch Display 2
·
Protect your Raspberry Pi Touch Display 2 with this tidy desktop display frame! 3 unique layers provide support and protection to the back of the screen 2 legs hold your screen at an ideal viewing angle - landscape or portrait! Touchscreen left entirely unimpeded. All Raspberry Pi ports accessibl...
Clipper LTE 4G Breakout (SP/CE)
·
Clipper lets you receive and transmit data over 4G LTE cellular networks - perfect for remote or mobile projects.WiFi is great, but sometimes you want your connected project to Just Work, wherever in the world it is. Perhaps you're going to a festival and don't know if there will be wireless conn...
