All Products
Showing 81-100 of 100 products
2 x AA Open Battery Holder with JST PH Connector
·
A slim, open-top 2×AA battery holder with a genuine JST PH connector. Two AA batteries in series provide approximately 3V — ideal for powering low-voltage electronics projects, Adafruit boards, and microcontrollers with JST PH battery inputs. The JST PH connector polarity matches Adafruit's Li-I...
2 x AAA Battery Holder with On/Off Switch JST PH Connector
·
A slim 2×AAA battery holder with a built-in on/off switch and genuine JST PH connector. Two AAA batteries in series provide approximately 3V — ideal for powering low-voltage electronics projects, microcontrollers, and portable builds. The JST PH connector polarity matches Adafruit's Li-Ion/LiPo ...
2 x AA Battery Holder with On/Off Switch JST PH Connector
·
A slim 2×AA battery holder with a built-in on/off switch and genuine JST PH connector. Two AA batteries in series provide approximately 3V — ideal for powering low-voltage electronics projects, microcontrollers, and portable builds without needing to disconnect the battery to turn off power. The...
3x AA Battery Holder with On/Off Switch and 2-Pin JST
·
This compact battery holder connects 3× AA batteries in series, providing 3.3–4.5V output — a similar range to lithium-ion/polymer batteries. It features a built-in on/off switch and a genuine JST-PH 2-pin connector with a 6" cable, making it a convenient drop-in power source for 3.3V projects wi...
JST-PH 2-Pin SMT Right Angle Connector
·
This JST PH 2-pin SMT right-angle connector is a surface-mount header designed to accept standard JST PH 2-pin plugs. It's commonly used as a battery connector on microcontroller boards, LiPo chargers, and small electronics — compatible with single-cell LiPo/Li-Ion battery leads, coin cell holder...
Jumper Wire - 0.1, 2-pin, 6
This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers. Dimensions: 6" length Documents: Drawing
JST RCY Connector - Male/Female Set (2-pin)
This is a 2-pin JST RCY connector typically used for low-voltage applications running 10A or less. They are commonly found in RC vehicles. These come in a bag of 1 male plug, 1 female plug, plus pins to connect them both. The pins crimp to your cable and are inserted into the housing. 1 male so...
Molex Pico Blade 2-pin Cable - 200mm
·
A 200 mm Molex PicoBlade 2-pin cable with 1.25 mm pitch connectors. The ultra-slim PicoBlade format takes up minimal PCB space while providing a secure friction-lock connection — ideal when standard 0.1" or JST PH connectors are too large. Specifications Connector Type – Molex PicoBlade Pitch...
Lithium Ion Polymer Battery with Short Cable - 3.7V 420mAh
·
A 3.7 V lithium-ion polymer (LiPo) battery with 420 mAh capacity (approximately 1.55 Wh). It features a short cable with a genuine 2-pin JST-PH connector that clicks smoothly into matching JST jacks without snagging. The battery includes built-in protection circuitry that guards against overchar...
Jumper Wire - 0.1, 2-pin, 4
This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers. Dimensions: 4" length Documents: Drawing
Jumper Wire - 0.1, 2-pin, 12
This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers. Dimensions: 12" length Documents: Drawing
SparkFun ESP8266 Thing - Dev Board
This is the SparkFun ESP8266 Thing Dev Board – a development board that has been solely designed around the ESP8266, with an integrated FTDI USB-to-Serial chip. The ESP8266 is a cost-effective, and very capable WiFi-enabled microcontroller. Like any microcontroller, it can be programmed to blink ...
SparkFun ESP8266 Thing - Dev Board (with Headers)
This is the SparkFun ESP8266 Thing Dev Board — a development board that has been solely designed around the ESP8266, with an integrated FTDI USB-to-Serial chip. The ESP8266 is a cost-effective and very capable WiFi-enabled microcontroller. Like any microcontroller, it can be programmed to blink L...
Lithium Ion Polymer Battery Ideal For Feathers - 3.7V 400mAh
·
Specifications Size: approximately 36 × 17 × 7.8mmWeight: 8.2gPower lead length: 25mm / 0.98"Output: 400mAh at 3.7V nominal Revision history: Since 8 July 2022, the end of the JST cable is taped sideways to the top of the battery to help prevent accidental rips. Lithium ion polymer (also known...
Adafruit Micro-Lipo Charger for LiPoly Batt with USB Type C Jack
·
The Adafruit Micro-Lipo Charger is a tiny, easy-to-use charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Simply plug a USB-C cable into any USB power source and connect your battery via the JST connector — two LEDs show charging status at a glance (red = ch...
Adafruit Prop-Maker Starter Kit - Make your own Lightsaber!
·
The Adafruit Prop-Maker Starter Kit contains the electronics you need to build a 3D-printed NeoPixel lightsaber with motion-activated lighting and full sound effects. The kit pairs the Feather M4 Express with the Prop-Maker FeatherWing, giving you an accelerometer for swing and hit detection, a C...
SparkFun OpenLog Data Collector with Machinechat - Air Quality Monitoring
The Air Quality Monitoring version of the SparkFun OpenLog Data Collector Kit with Machinechat is an easy way to organize and display your data from an included SGP40 Qwiic Air Quality Sensor with the OpenLog Artemis and JEDI One. The SparkFun OpenLog Artemis (without IMU) is an open source data ...
SparkFun OpenLog Data Collector with Machinechat - Environmental Monitoring
The Environmental Monitoring version of the SparkFun OpenLog Data Collector Kit with Machinechat is an easy way to organize and display your data from an included BME280 Qwiic Atmospheric Sensor with the OpenLog Artemis and JEDI One. The SparkFun OpenLog Artemis (without IMU) is an open source da...
SparkFun OpenLog Data Collector with Machinechat - Base Kit
The Base version of the SparkFun OpenLog Data Collector Kit with Machinechat is an easy way to organize and display your data with the OpenLog Artemis and JEDI One. The SparkFun OpenLog Artemis (without IMU) is an open source data logger that comes preprogrammed to automatically log GPS / GNSS, s...
1.25mm Pitch 2-pin Cable Matching Pair - 40cm long - Molex PicoBlade Compatible
·
This matching pair of 1.25 mm pitch 2-pin cables includes an inline socket and plug connector, providing a complete Molex PicoBlade-compatible connection set. At 40 cm long, these cables offer plenty of reach for internal wiring and panel-mount applications. The friction-lock connectors provide ...
