All Products

SKU: SF-WRL-13225

The SparkFun XBee Explorer Serial is an RS232 serial base unit for configuring and communicating with XBee modules. Compatible with all XBee modules including Series 1, Series 2.5, standard, and Pro versions. Simply plug in an XBee module, connect an RS232 cable, and gain direct access to the ser...

SKU: SF-WRL-11812

This is a simple to use, USB to serial base unit for the Digi XBee line. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Explorer, attach a mini USB cable, and you will have direct access to the serial and programm...

SKU: SF-WRL-12847

XBee radios are an awesome way to add wireless capability to your Arduino project and now it’s even easier with the SparkFun XBee Shield. The shield form-factor mates directly with any dev board that has an Arduino standard footprint and equips it with wireless communication capabilities using...

SKU: PI-TEK010

Learn about 5 different mechanical switches and then design your own! There are hundreds of switches in the world, but why? Did you know that switches can act as sensors? The sparking sense set has our favourite sensing switches and we walk you through how to build gadgets with each one. Each ...

SKU: DF-ROB0109

Sparki is a fully assembled, Arduino-compatible robot designed for learning programming, electronics, and robotics. Based on the Arduino Leonardo, it comes packed with sensors, motors, a display, and wireless connectivity — ready to use out of the box with no assembly required. Key Features Ar...

SKU: JU-W-215

Writer's block, artist's block — creative dry spells can hit anyone at any time. This charming lapel pin is a little bottled spark of creativity to wear and draw upon whenever your muse goes quiet. Designed by Jubly-Umph, this limited-edition hard enamel pin comes beautifully presented on a bran...

SKU: SF-GPS-28139 · MPN: GPS-28139

The SparkPNT GNSS Flex Module delivers centimetre-level RTK positioning using the Quectel LG290P receiver with quad-band support (L1, L2, L5, E6/L6) and multi-constellation tracking across GPS, GLONASS, Galileo, BDS, QZSS, and NavIC. With a built-in NIC anti-jamming unit and 1,040 tracking channe...

SKU: SF-GPS-28138 · MPN: GPS-28138

The SparkPNT GNSS Flex Module features the Septentrio mosaic-X5, an industrial-grade multi-band, multi-constellation GNSS receiver capable of centimetre-level RTK positioning accuracy. Designed for demanding applications in robotics, autonomous systems, and precision navigation. The mosaic-X5 tr...

SKU: DF-DFR0902

The Spartan Arduino PLC 16DA is an Arduino Leonardo-based industrial programmable logic controller with optoisolated outputs. It features 8 inputs (digital and analogue) and 8 optoisolated outputs (analogue, digital, and PWM), making it suitable for industrial automation and control applications....

SKU: DF-DFR0903

This Arduino-based Industrial PLC (Relay Output) features 8 inputs and 6 outputs(digital relay output). As it uses an Arduino Leonardo, you can directly program it through the USB, which is pretty easy to get started. The Spartan controllers are all standarised and can be programmed exactly ...

SKU: PI-COM0409

Simple SPDT slide switch. Rated at 30V/200mA. The pins have .1" spacing - fits great into a breadboard! Use it as a power switch or general control switch.Documents:Dimensional Drawing

SKU: SF-COM-00102

Simple SPDT slide switch. Rated at 30V/200mA. The pins have .1" spacing - fits great into a breadboard! Use it as a power switch or general control switch.

SKU: SF-COM-09609

This is a simple SPDT slide switch - great for use as an ON/OFF button, or just as a general control switch. The pins are spaced by 0.1", however they are incredibly thin making breadboard use not recommended. The switch is rated for 0.3A at 50VDC.This switch is just a bit smaller than our popula...

SKU: SF-COM-09151

A compact 0.5W speaker with 8 ohm impedance, small enough to fit inside robot builds, enclosures, and portable electronics projects. Suitable for audio output from amplifier boards, microcontrollers with DAC/PWM audio, and FM radio modules. Specifications Power Rating – 0.5W Impedance – 8 Ω ...

SKU: AF-1314

A 3-inch (76.2 mm) speaker cone with 4 Ω impedance and 3 W power handling. Four mounting tabs spaced 60 mm apart make it easy to secure in enclosures or project housings. Pairs well with Class D amplifier boards for compact audio projects. Specifications Diameter: 3″ (76.2 mm) Impedance: 4 Ω ...

SKU: AF-1313

Listen up! This 3" diameter speaker cone is the perfect addition to any audio project where you need an 8 ohm impedance and 1W or less of power. We particularly like this cone as it has 4 handy mounting tabs 60mm apart.Works great with our Wave shield or class D amplifier board.

SKU: AF-3968

Hear the good news! This speaker is a great addition to any audio project where you need a 4 Ohm impedance and 3W or less of power. At 40mm diameter it has a more square-ish shape, but a smaller face. Sound quality and volume are nicely sandwiched between our Thin Plastic Speaker with Wires an...

SKU: PI-MNK00060

The MonkMakes Speaker for micro:bit is a compact, amplified speaker that connects to your micro:bit using alligator clips. It's the easiest way to add sound output to your micro:bit projects — just clip on and start coding. With built-in amplification, reverse polarity protection, and an LED pow...

SKU: MM-SKU00077

The Speaker Kit for Raspberry Pi is a great way of attaching a small amplified speaker to a Raspberry Pi.Raspberry Pi NOT includedThe kit includes: MonkMakes Amplified Speaker Set of 10 female to female header wires to power the Amplified Speaker (only 2 needed) A short stereo audio lead A R...

SKU: SF-COM-27247 · MPN: COM-27247

A compact through-hole speaker that solders directly to your PCB. When you need better audio quality than a piezo buzzer but don't have room for a full-sized speaker, this 30mm unit hits the sweet spot – clear enough for voice prompts and alerts, small enough to fit in tight enclosures. The plas...